Process length variation of the cyst of the dinoflagellate Protoceratium reticulatum in the North Pacific and Baltic‐Skagerrak region: calibration as an annual density proxy and first evidence of pseudo‐cryptic speciation

Process length variation of cysts of the dinoflagellate Protoceratium reticulatum (Claparède et Lachmann) Bütschli in surface sediments from the North Pacific was investigated. The average process length showed a significant inverse relation to annual seawater density: σ_{t annual} = ?0.8674 × average process length + 1029.3 (R² = 0.84), with a standard error of 0.78 kg m^?3. A sediment trap study from Effingham Inlet in British Columbia revealed the same relationship between average process length and local seawater density variations. In the Baltic–Skagerrak region, the average process length variation was related significantly to annual seawater density: σ_{t annual} = 3.5457 × average process length ? 993.28 (R² = 0.86), with a standard error of 3.09 kg m^?3. These calibrations cannot be reconciled, which accentuates the regional character of the calibrations. This can be related to variations in molecular data (small subunit, long subunit and internal transcribed spacer sequences), which show the presence of several genotypes and the occurrence of pseudo‐cryptic speciation within this species. Copyright © 2012 John Wiley & Sons, Ltd.     

Estimating impacts of warming temperatures on California's electricity system

Despite a clear need, little research has been carried out at the regional-level to quantify potential climate-related impacts to electricity production and delivery systems. This paper introduces a bottom-up study of climate change impacts on California's energy infrastructure, including high temperature effects on power plant capacity, transmission lines, substation capacity, and peak electricity demand. End-of-century impacts were projected using the A2 and B1 Intergovernmental Panel on Climate Change emission scenarios. The study quantifies the effect of high ambient temperatures on electricity generation, the capacity of substations and transmission lines, and the demand for peak power for a set of climate scenarios. Based on these scenarios, atmospheric warming and associated peak demand increases would necessitate up to 38% of additional peak generation capacity and up to 31% additional transmission capacity, assuming current infrastructure. These findings, although based on a limited number of scenarios, suggest that additional funding could be put to good use by supporting R&D into next generation cooling equipment technologies, diversifying the power generation mix without compromising the system's operational flexibility, and designing effective demand side management programs.     

Initialization and data assimilation experiments with a primitive equation model

The process of combining models of the ocean circulation with large data sets is known in meteorology as model initialization and data assimilation. This process is new to oceanographers, who only now are on the verge of having available world-wide synoptic maps of dynamic variables. In this paper we carry out a series of idealized initialization/assimilation experiments with a primitive equation (PE) model, which constitute a first step in developing a realistic process model and data assimilation techniques for the Gulf Stream system. The PE model is used in a spin-down mode and initialized with an analytic jet profile with geostrophically balanced fields.Two major questions are addressed in the present study. The first concerns the initialization process of a PE model during which internal/inertial gravity wave noise is produced. We ask: are the initialization shocks equally crucial for ocean models as they have been for their atmospheric counterparts? The results of an extensive series of balanced versus unbalanced initializations indicate that, for a PE model with a rigid lid, a brutally unbalanced initialization is required to produce strong internal gravity wave shocks. A geostrophically balanced initialization is sufficient to ensure smooth jet evolutions, with no apparent gravity waves, over long time durations in the spin-down mode. No sophisticated initialization procedures seem, therefore, to be required.The second question addressed is: which component of the flow is the most important in data assimilation to drive the model response towards a baseline reference ocean? We specifically compare the knowledge of the depth-integrated flow only, corresponding to measurements of the total transport, with the knowledge of the density field only, or equivalently the velocity shear. The knowledge of the interior density field is much more effective in decreasing the root-mean-square (r.m.s.) errors relative to the reference ocean. If the baroclinic structure is known, coarse horizontal resolutions of data insertion can be reached before significantly worsening the model estimates. If only the depth-averaged flow is known, a decrease in the horizontal resolution of data assimilation has an immediate effect: the r.m.s. errors sharply increase and the assimilation run diverges from the reference ocean. In the assimilation of the barotropic flow alone, even with dense resolution, the errors in the deep layers always show an increasing trend. The relative effectiveness of baroclinic versus barotropic data insertion can be rationalized in the context of geostrophic adjustment theory.     

The agricultural utility of lithic-mulch gardens: Past and present

The mulching of agricultural fields and gardens with stones, pebbles, volcanic ash and similar lithic materials is a variant agricultural strategy uniquely suited to the constraints of a dryland environment. While the agricultural literature contains reports on limited experiments with stone or gravel mulch, data regarding the employment of lithic mulch are lacking. This paper works to bridge this gap by comparing empirical data collected from prehistoric pebble-mulch gardens in the Galisteo Basin (New Mexico) to contemporary agricultural experiments with lithic mulch. Such past-present and experimental-real world comparisons allow us to more fully address the effectiveness of lithic mulching as an agricultural strategy. It is affirmed that lithic mulch is applied to garden plots, especially during periods of drought, in order to reduce soil erosion from wind and water, increase soil temperature to extend the growing season, increase water infiltration, and reduce the evaporative loss of water from wind and sun. The cumulative effect of this soil and water conserving technique is an increase in crop biomass and crop yield.     

The trapped fluid phase in upper mantle xenoliths from Victoria,Australia: implications for mantle metasomatism

Mantle-derived xenoliths of spinel lherzolite, spinel pyroxenite, garnet pyroxenite and wehrlite from Bullenmerri and Gnotuk maars, southwestern Victoria, Australia contain up to 3 vol.% of fluids trapped at high pressures. The fluid-filled cavities range in size from fluid inclusions (1–100 m) up to vugs 11/2 cm across, lined with euhedral high-pressure phases. The larger cavities form an integral part of the mosaic microstructure. Microthermometry and Raman laser microprobe analysis show that the fluids are dominantly CO₂. Small isolated inclusions may have densities 1.19 g/cm³, but most inclusions show microstructural evidence of partial decrepitation during eruption, and these have lower fluid densities. Mass-spectrometric analysis of gases released by crushing or heating shows the presence of He, N₂, Ar, H₂S, CO_s and SO₂ in small quantities; these may explain the small freezing-point depressions observed in some inclusions. Petrographic, SEM and microprobe studies show that the trapped fluids have reacted with the cavity walls (in clinopyroxene grains) to produce secondary amphiboles and carbonates. The trapped CO₂ thus represents only a small residual proportion of an original volatile phase, which has undergone at least two stages of modification — first by equilibration with spinel lherzolite to form amphibole (±mica±apatite), then by limited reaction with the walls of the fluid inclusions. The inferred original fluid was a CO₂-H₂O mixture, with significant contents of (at least) Cl and sulfur species. Generation of this fluid phase in the garnet-peridotite stability field, followed by its migration to the spinel peridotite stability field, would provide an efficient mechanism for metasomatic enrichment of the upper mantle in LIL elements. This migration could involve either a volatile flux or transport in small volumes of silicate melt that crystallize in the spinel peridotite field. These observations suggest that some portions of the subcontinental upper mantle contain large reservoirs of free fluid CO₂, which may be liberated during episodes of rifting or magmatism, to induce granulite-facies metamorphism of the lower crust.     

Surface study of HF- and HFH2SO4-treated feldspar using Auger electron spectroscopy

Auger electron spectroscopy has been used to study K-feldspar that has been reacted with both aqueous 10% HF and a 50% mixture of a 10% HF/0.1 N H₂SO₄ solution. In the feldspar/HF system, the resulting feldspar surface was shown to have been fluorinated; depth profiling, using argon ion sputtering, showed the fluorination to have occurred substantially into the mineral bulk. In the feldspar/ $\text{HF}\text{H}{}_2\text{SO}{}_4$ system, the resulting surface contained both fluorine and sulfur. The fluorination had again penetrated into the bulk, but the sulfur could be removed with mild argon ion sputtering. The $\text{Al}\text{F}$ signal ratio was much lower on the feldspar surface treated with the 10% HF/0.1 N H₂SO₄ solution than the feldspar surface treated with the weaker 10% HF acid solution.     

Hybrid Estimation of Semivariogram Parameters

Two widely used methods of semivariogram estimation are weighted least squares estimation and maximum likelihood estimation. The former have certain computational advantages, whereas the latter are more statistically efficient. We introduce and study a “hybrid” semivariogram estimation procedure that combines weighted least squares estimation of the range parameter with maximum likelihood estimation of the sill (and nugget) assuming known range, in such a way that the sill-to-range ratio in an exponential semivariogram is estimated consistently under an infill asymptotic regime. We show empirically that such a procedure is nearly as efficient computationally, and more efficient statistically for some parameters, than weighted least squares estimation of all of the semivariogram’s parameters. Furthermore, we demonstrate that standard plug-in (or empirical) spatial predictors and prediction error variances, obtained by replacing the unknown semivariogram parameters with estimates in expressions for the ordinary kriging predictor and kriging variance, respectively, perform better when hybrid estimates are plugged in than when weighted least squares estimates are plugged in. In view of these results and the simplicity of computing the hybrid estimates from weighted least squares estimates, we suggest that software that currently estimates the semivariogram by weighted least squares methods be amended to include hybrid estimation as an option.     

Impedance of flexible suction caissons

The dynamic response of offshore wind turbines is affected by the properties of the foundation and the subsoil. The aim of this paper is to evaluate the dynamic soil–structure interaction of suction caissons for offshore wind turbines. The investigations include evaluation of the vertical and coupled sliding–rocking vibrations, influence of the foundation geometry and examination on the properties of the surrounding soil. The soil is simplified as a homogenous linear viscoelastic material and the dynamic stiffness of the suction caisson is expressed in terms of dimensionless frequency‐dependent coefficients corresponding to different degrees of freedom. The dynamic stiffness coefficients for the skirted foundation are evaluated using a three‐dimensional coupled boundary element/finite element model. Comparisons with known analytical and numerical solutions indicate that the static and dynamic behaviours of the foundation are predicted accurately using the applied model. The analysis has been carried out for different combinations of the skirt length, Poisson's ratio of the subsoil and the ratio of the soil stiffness to the skirt stiffness. Copyright © 2007 John Wiley & Sons, Ltd.