Physical behavior of the SEEDS iron-fertilized patch by sulphur hexafluoride tracer release

The first iron (Fe) – fertilization experiment in the western North Pacific was carried out using SF₆ to trace the Fe-fertilized water mass. A solution in 10,800 liters of seawater of 350 kg of Fe and 0.48 M of SF₆ tracer was released into the mixed layer over a 8 × 10 km area. On the first underway transects through the patch after the Fe release, we observed a significant increase of dissolved Fe (ave. 2.89 nM). The fertilized patch was traced for 14 days by on-board SF₆ analysis. A Lagrangian frame of reference was maintained by the use of a drogued GPS buoy released at the center of the patch. The patch moved westward at a rate of 6.8 km d⁻¹. Mixed layer depth increased from 8.5 to 15 m during the experiment. Horizontal diffusivity was determined by the change of SF₆ concentration in the patch. The horizontal diffusivity increased during the experiment. We evaluate here the fate of Fe in a Fe-fertilized patch using the dilution rate determined from sulphur hexafluoride (SF₆) concentration. Dissolved Fe concentrations subsequently decreased rapidly to 0.15 nM on Day 13. However, the dissolved Fe half-life of 43 h was relatively longer than in previous Fe-enrichment studies, and we observed a larger increase of the centric diatom standing stock and corresponding drawdown of macro-nutrients and carbon dioxide than in the previous studies. The most important reason for the larger response was the phytoplankton species in the western North Pacific. In addition, the smaller diffusivity and shallower mixed layer were effective to sustain the higher dissolved Fe concentration compared to previous experiments. This might be one reason for the larger response of diatoms in SEEDS.     

Spatiotemporal Decreases of Nutrients and Chlorophyll-a in the Surface Mixed Layer of the Western North Pacific from 1971 to 2000

Using time series of hydrographic data in the wintertime and summertime obtained along 137°E from 1971 to 2000, we found that the average contents of nutrients in the surface mixed layer showed linear decreasing trends of 0.001∼0.004 μmol-PO₄ l⁻¹ yr⁻¹ and 0.01∼0.04 μmol-NO₃ l⁻¹ yr⁻¹ with the decrease of density. The water column Chl-a (CHL) and the net community production (NCP) had also declined by 0.27∼0.48 mg-Chl m⁻² yr⁻¹ and 0.08∼0.47 g-C-NCP m⁻² yr⁻¹ with a clear oscillation of 20.8±0.8 years. These changes showed a strong negative correlation with the Pacific Decadal Oscillation Index (PDO) with a time lag of 2 years (R = 0.89 ± 0.02). Considering the recent significant decrease of O₂ over the North Pacific subsurface water, these findings suggest that the long-term decreasing trend of surface-deep water mixing has caused the decrease of marine biological activity in the surface mixed layer with a bidecadal oscillation over the western North Pacific.     

Stability and P–V–T equation of state of KAlSi3O8-hollandite determined by in situ X-ray observations and implications for dynamics of subducted continental crust material

In situ X-ray diffraction measurements of KAlSi₃O₈-hollandite (K-hollandite) were performed at pressures of 15–27 GPa and temperatures of 300–1,800 K using a Kawai-type apparatus. Unit-cell volumes obtained at various pressure and temperature conditions in a series of measurements were fitted to the high-temperature Birch-Murnaghan equation of state and a complete set of thermoelastic parameters was obtained with an assumed K′_300,0=4. The determined parameters are V _300,0=237.6(2) Å³, K _300,0=183(3) GPa, (?K _T,0/?T) _P =?0.033(2) GPa K^?1, a ₀=3.32(5)×10^?5 K^?1, and b ₀=1.09(1)×10^?8 K^?2, where a ₀ and b ₀ are coefficients describing the zero-pressure thermal expansion: α _T,0 = a ₀ + b ₀ T. We observed broadening and splitting of diffraction peaks of K-hollandite at pressures of 20–23 GPa and temperatures of 300–1,000 K. We attribute this to the phase transitions from hollandite to hollandite II that is an unquenchable high-pressure phase recently found. We determined the phase boundary to be P (GPa)=16.6 + 0.007 T (K). Using the equation of state parameters of K-hollandite determined in the present study, we calculated a density profile of a hypothetical continental crust (HCC), which consists only of K-hollandite, majorite garnet, and stishovite with 1:1:1 ratio in volume. Density of HCC is higher than the surrounding mantle by about 0.2 g cm^?3 in the mantle transition zone while this relation is reversed below 660-km depth and HCC becomes less dense than the surrounding mantle by about 0.15 g cm^?3 in the uppermost lower mantle. Thus the 660-km seismic discontinuity can be a barrier to prevent the transportation of subducted continental crust materials to the lower mantle and the subducted continental crust may reside at the bottom of the mantle transition zone.     

一种特殊类型硅质岩——浮石状燧石

一种较为少见的特殊硅质岩产于南京及巢湖地区的下二叠统孤峰组地层中。它的显著特征是岩石中存在大量菱形和不规则状孔隙,孔隙周边和孔隙间主要由微晶石英组成。通过对该岩石的成分和结构等特征的研究,认为它是一种交代碳酸盐岩成因的硅质岩,并定名为浮石状燧石。     

Depositional environments of well‐sorted detrital limestone from the Minatogawa Formation in the southern part of Okinawa Island,the Ryukyu Archipelago,Japan

Well‐sorted detrital limestone is one of the typical lithofacies of the latest interval of the Pleistocene Ryukyu Group, which is exposed in the Ryukyu Archipelago in southwestern Japan. The depositional environments of the limestone are interpreted to be extremely shallow and to include back‐reef lagoons or moats and subaerial sand dunes. However, detailed micropaleontological analyses have not been performed on this limestone. In this study, the interpretation of the depositional environments and paleo‐water depths was improved by quantitative examination of foraminiferal assemblages for the well‐sorted detrital limestone of the Minatogawa Formation in the southern part of Okinawa Island. Thin sections of limestone collected from the Minatogawa (Horikawa) quarry were subjected to sedimentological and foraminiferal analyses. Comparison with modern foraminiferal distribution within the Ryukyu Archipelago indicates that back‐reef and fore‐reef dwelling foraminifers characterize the fossil assemblages from the well‐sorted detrital limestone (bioclastic grainstone). Three ratios of indicator foraminiferal taxa (ratios of back‐reef to fore‐reef taxa, planktonic foraminifers to Amphistegina lobifera and Amphistegina lessonii, and Calcarina gaudichaudii to other Calcarina species), as well as multivariate analyses suggest that the well‐sorted detrital limestone was deposited in fore‐reef setting shallower than 40 m in water depth. A comparable depth range was reconstructed from the coral assemblage in the associated coral limestone, suggesting that the Minatogawa Formation was deposited in a gently inclined ramp setting with patch reefs and/or fringing reefs. Stratigraphic changes in paleo‐water depth, together with evidence of several unconformities associated with paleosol layers suggest that there were repeated transgressions and regressions, with an amplitude up to several tens of meters, when the Minatogawa Formation was deposited.     

Estimating the thickness of a faulted mechanical layer based on fault spacing: An example from Miyako‐jima Island,southern Ryukyu Arc,Japan

The thickness of the mechanical layer that hosts a group of faults can be estimated from the spacing of saturated faults (i.e. the constant spacing between faults when the fault system is fully developed and has attained its final fault density). We measured fault spacing for a group of saturated active normal faults on Miyako‐jima Island (southern Ryukyu Arc, Japan) and estimated the thickness of the faulted mechanical layer. The measured fault spacing is 1.30 ±0.14 km, and the thickness of the mechanical layer is < 3 km, which is the upper limit of the seismogenic zone. This faulted mechanical layer corresponds to a sedimentary layer in which earthquakes cannot occur. Results indicate that the shallow (< 3 km depth) normal faults on Miyako‐jima Island do not have the potential to cause medium‐size earthquakes as individual faults. The origin of the shallow normal faults might be related to the presence of a larger‐scale, deeper fault. The results indicate that fault spacing provides important information on the potential magnitude of earthquakes associated with active faults.     

Surface current and vertical thermal structure on the continental slope in Tosa Bay

In order to specify a vertical thermal structure related to surface current variation on the continental slope in Tosa Bay, Japan, we analyzed monthly regular hydrographic measurements in the years 1991–2004. Subsurface temperature below 200 m on the slope was found to vary synchronously with the vertical displacement of the main thermocline around 200 m. It is shown that the vertical-averaged temperature below 200 m is significantly correlated with an along-isobath/southwestward surface current velocity on the slope. This correlation indicates that when a strong (weak) southwestward surface current is observed, temperature below 200 m decreases (increases) simultaneously, that is, isotherms below the 200 m are displaced upward (downward) together with the main thermocline. Moreover, when the strong southwestward flow is detected, across-isobath isotherms around 200 m slope upward toward the offshore direction. Furthermore, it is suggested that as the Kuroshio axis moves offshore south of the bay, the southwestward flow tends to be weakened by the combined effect of other Kuroshio parameters such as transport and stream width as well as the Kuroshio axis position. As a result, it is inferred that the correlation between the surface current and subsurface temperature can be interpreted in terms of the formation and decay of an anticlockwise circulation interacting with a cold eddy.     

Particle tracking experiments on a model of the Okhotsk Sea: Toward oil spill simulation

Particle tracking experiments were conducted for the Sea of Okhotsk using a three-dimensional ocean circulation model, as a step toward the simulation of oil spills. The model’s reproducibility is first examined in detail. Comparison with surface drifter and moored ADCP data shows that the model successfully reproduces the velocity field over the shelves, particularly in the weak stratification period. This is because the current variability is simply determined by integration of the alongshore component of the wind stress over the coast from which arrested topographic waves propagate. Good agreement even in the ice-covered period implies that the neglect of sea ice in the model is not a problem for reproduction of the current over the shelves. Good agreement also supports the correction of ECMWF wind speed by a factor of 1.25. A series of particle tracking experiments was carried out to examine the case of particles released from the Sakhalin oil field at depths of 0 m and 15 m. Regardless of the deployment month and year, most particles at depth 15 m are transported southward along the Sakhalin coast, in accordance with the abrupt intensification of the East Sakhalin Current in October, finally arriving offshore of Hokkaido in November–January. Particles at the surface, which are affected by wind drift in addition to the ocean current, show larger yearly variability. In years when the offshoreward-wind dominates, the particles would be advected out of the mainstream of the current and would not be transported offshore of Hokkaido.     

Phase boundary between ilmenite and perovskite structures in MnGeO3 determined by in situ X-ray diffraction measurements

In situ X-ray observations of the phase transition from ilmenite to perovskite structure in MnGeO₃ were carried out in a Kawai-type high-pressure apparatus interfaced with synchrotron radiation. The phase boundary between the ilmenite and perovskite structures in the temperature range of 700–1,400°C was determined to be P (GPa) = 16.5(±0.6) − 0.0034(±0.0006)T (°C) based on Anderson’s gold pressure scale. The Clapeyron slope, dP/dT, determined in this study is consistent with that for the transition boundary between the ilmenite and the perovskite structure in MgSiO₃.