Spatiotemporal Variations in the Content of Pollutants in the Moscow Air Basin and Their Emissions

Izvestiya, Atmospheric and Oceanic Physics - The location of Moscow on a plain within higher latitudes when compared to other megacities creates conditions for the chemical transformation of...     

Study on Ship Automatic Berthing System with Mooring Lines

This study describes an automatic berthing system with mooring lines. It is designed to be berthed by using mooring device on the upper deck of a ship. It is to berth once maintaining parallel with the quay by controlling both forward and aft breast lines. Berthing method is used through length adjustment of mooring lines connected between ship and quay by controlling the angular velocity and the torque of hydraulic motor in mooring device. The study is conducted under three changing conditions of draft, such as even-keel, rise of the gravity center and trim to stern. Variables affecting berthing stability are determined based on the control performance of each condition. Bond graphs method is used to model the system. Controller is designed as PID control method of reference-model algorithm. The control program is composed of synchronous control system based on the equations derived with the numerical analysis. The tank test is conducted to verify the usefulness of the control program.     

A predictive numerical model for potential mapping of the gas hydrate stability zone in the Gulf of Cadiz

This paper presents a computational model for mapping the regional 3D distribution in which seafloor gas hydrates would be stable, that is carried out in a Geographical Information System (GIS) environment. The construction of the model is comprised of three primary steps, namely: (1) the construction of surfaces for the various variables based on available 3D data (seafloor temperature, geothermal gradient and depth-pressure); (2) the calculation of the gas function equilibrium functions for the various hydrocarbon compositions reported from hydrate and sediment samples; and (3) the calculation of the thickness of the hydrate stability zone. The solution is based on a transcendental function, which is solved iteratively in a GIS environment.The model has been applied in the northernmost continental slope of the Gulf of Cadiz, an area where an abundant supply for hydrate formation, such as extensive hydrocarbon seeps, diapirs and fault structures, is combined with deep undercurrents and a complex seafloor morphology. In the Gulf of Cadiz, the model depicts the distribution of the base of the gas hydrate stability zone for both biogenic and thermogenic gas compositions, and explains the geometry and distribution of geological structures derived from gas venting in the Tasyo Field (Gulf of Cadiz) and the generation of BSR levels on the upper continental slope.     

Geometry and architectural associations of co-genetic debrite–turbidite beds in basin-margin strata, Carboniferous Ross Sandstone (Ireland): Applications to reservoirs located on the margins of structurally confined submarine fans

Co-genetic debrite–turbidite beds are most commonly found in distal basin-plain settings and basin margins. This study documents the geometry, architectural association and paleogeographic occurrence of co-genetic debrite–turbidite beds in the Carboniferous Ross Sandstone with the goal of reducing uncertainty in the interpretation of subsurface data in similarly shaped basins where oil and gas is produced.The Ross Sandstone of western Ireland was deposited in a structurally confined submarine basin. Two outcrops contain co-genetic debrite–turbidite beds: Ballybunnion and Inishcorker. Both of the exposures contain strata deposited on the margin of the basin. An integrated dataset was used to characterize the stratigraphy of the Ballybunnion exposure. The exposure is divided into lower, middle, and upper units. The lower unit contains laminated shale with phosphate nodules, structureless siltstone, convolute bedding/slumps, locally contorted shale, and siltstone turbidites. The middle unit contains co-genetic debrite–turbidite beds, siltstone turbidites, and structureless siltstone. Each co-genetic debrite–turbidite bed contains evidence that fluid turbulence and matrix strength operated alternately and possibly simultaneously during deposition by a single sediment-gravity-flow event. The upper unit contains thin-bedded sandy turbidites, amalgamated sandy turbidites, siltstone turbidites, structureless siltstone, and laminated shale. A similar vertical facies pattern is found at Inishcorker.Co-genetic debrite–turbidite beds are only found at the basin-margin. We interpret these distinct beds to have originated as sand-rich, fully turbulent flows that eroded muddy strata on the slope as well as interbedded sandstone and mudstone in axial positions of the basin floor forming channels and associated megaflute erosional surfaces. This erosion caused the axially dispersing flows to laterally evolve to silt- and clay-rich flows suspended by both fluid turbulence and matrix strength due to a relative increase in clay proportions and associated turbulence suppression. The flows were efficient enough to bypass the basin center/floor, physically disconnecting their deposits from coeval lobes, resulting in deposition of co-genetic debrite–turbidite beds on the basin margin. The record of these bypassing flows in axial positions of the basin is erosional surfaces draped by thin siltstone beds with organic debris.A detailed cross-section through the Ross Sandstone reveals a wedge of low net-to-gross, poor reservoir-quality strata that physically separates sandy, basin-floor strata from the basin margin. The wedge of strata is referred to as the transition zone. The transition zone is composed of co-genetic debrite–turbidite beds, structureless siltstone, slumps, locally contorted shale, and laminated shale. Using data from the Ross Sandstone, two equations are defined that predict the size and shape of the transition zone. The equations use three variables (thickness of basin-margin strata, thickness of coeval strata on the basin floor, and angle of the basin margin) to solve for width (w) and trajectory of the basinward side of the low net-to-gross wedge (β). Beta is not a time line, but a facies boundary that separates sandy basin floor strata from silty basin-margin strata. The transition zone is interpreted to exist on lateral and distal margins of the structurally confined basin.Seismic examples from Gulf of Mexico minibasins reveal a wedge of low continuity, low amplitude seismic facies adjacent to the basin margin. Strata in this wedge are interpreted as transition-zone sediments, similar to those in the Ross Sandstone. Besides defining the size and shape of the transition zone, the variables “w” and “β” define two important drilling parameters. The variable “w” corresponds to the minimum distance a well bore should be positioned from the lateral basin margin to intersect sandy strata, and “β” corresponds to the deviation (from horizontal) of the well bore to follow the interface between sandy and low net-to-gross strata. Calculations reveal that “w” and “β” are related to the relative amount of draping, condensed strata on the margin and the angle of the basin margin. Basins with shallowly dipping margins and relatively high proportions of draping, clay-rich strata have wider transition zones compared to basins with steeply dipping margins with little draping strata. These concepts can reduce uncertainty when interpreting subsurface data in other structurally confined basins including those in Gulf of Mexico, offshore West Africa, and Brunei.     

Hazard assessment in rock cliffs at Central Algarve (Portugal): A tool for coastal management

Coastal hazards are in the interface of human activities with natural coastal processes. The conflicts arising from this relationship require new approaches suitable for coastal management that consider the dynamic of coastal areas. A method to assess hazard in rock cliffs is presented, combining cliff evolution forcing mechanisms along with protection factors, according to a weighted factors system. This method provides a rapid evaluation of vulnerability for cliffed areas, supporting coastal management and hazard mitigation. The method was applied to the rocky cliffs of the densely populated coastal zone between Galé and Olhos de Água (Southern Portugal), where high and very high hazard values were found to be dominant. A method validation was made using the vulnerability areas and the recorded mass movements over a 45 year period in the same area.     

Evaluation of a dynamically downscaled atmospheric reanalyse in the prospect of forcing long term simulations of the ocean circulation in the Gulf of Lions

The paper evaluates atmospheric reanalysis as possible forcing of model simulations of the ocean circulation inter-annual variability in the Gulf of Lions in the Western Mediterranean Sea between 1990 and 2000. The sensitivity of the coastal atmospheric patterns to the model resolution is investigated using the REMO regional climate model (18 km, 1 h), and the recent global atmospheric reanalysis ERA40 (125 km, 6 h). At scales from a few years to a few days, both atmospheric data sets exhibit a very similar weather, and agreement between REMO and ERA40 is especially good on the seasonal cycle and at the daily variability scale. At smaller scales, REMO reproduces more realistic spatio-temporal patterns in the ocean forcing: specific wind systems, particular atmospheric behaviour on the shelf, diurnal cycle, sea-breeze. Ocean twin experiments (1990–1993) clearly underline REMO skills to drive dominant oceanic processes in this microtidal area. Finer wind patterns induce a more realistic circulation and hydrology of the shelf water: unique shelf circulation, upwelling, temperature and salinity exchanges at the shelf break. The hourly sampling of REMO introduces a diurnal forcing which enhances the behaviour of the ocean mixed layer. In addition, the more numerous wind extremes modify the exchanges at the shelf break: favouring the export of dense shelf water, enhancing the mesoscale variability and the interactions of the along slope current with the bathymetry.     

The spectral characteristics and kinematics of short-period internal waves on the Hawaiian shelf

Based on the results of analyzing the characteristics of currents and temperature measured in the water space of the Mamala Bay (the Island of Oahu, Hawaii), we investigate the main properties of the field of short-period internal waves, which is very complex. We focus on analyzing the spectral characteristics and orbit parameters for waves with a period of 20 minutes. The results of investigations reveal two types of short-period internal waves for this area: intense and fast waves propagating predominantly toward the ocean and weaker and slower waves propagating mainly toward the coast. Suppositions are made on how these waves form: the strong and fast waves are likely to be caused by the decay of locally generated internal tides near the shelf edge, while the weak and slow and very short waves seem to result from the specific interaction between the pycnocline and strong tidal currents over a steep slope.     

Optimal interpolation of the data of remote sensing of the sea surface

We analyze the statistical structure of the data of remote sensing of the fields of surface temperature and the concentration of chlorophyll in the northwest part of the Black Sea with an aim to apply the method of optimal interpolation to the restoration of the maps of these fields according to the restricted amounts of data. We determine the scales of smoothing for the selection of the random components of the fields and estimate their difference from the statistical model uniform and isotropic over the space correlation coefficients. The functions of spectral densities are constructed along various sections and the best intervals of discretization of the fields required to perform the optimal interpolation with given accuracy are determined. It is shown that the construction of the maps of fields under the conditions of controlled accuracy of reconstruction of their values remains possible even if the amounts of the input satellite data are significantly decreased. We consider a procedure of evaluation of the best possible amounts of data required for the use of the method of optimal interpolation. Some examples of application of this procedure to the data of remote sensing of the fields of surface temperature and the concentration of chlorophyll are presented.     

An integral description of the propagation of steady-state perturbations of the heavy liquid surface

The system of equations of motion describing the gravity wave propagation in a perfect heavy liquid layer is transformed into a new integral equation for the free surface elevations. In the limit cases, this integral equation describes the linear and nonlinear periodic waves as well as the known types of solitary waves. In this case a dispersion equation arises because perturbations of the second and higher orders of smallness are neglected. The integral equation allows for the propagation of invariable surface perturbations of arbitrary forms if their spatial spectrum is concentrated near small wave numbers (compared to the inverse wave amplitude). Several examples of solutions are presented.     

Discrete time-delay control of an autonomous underwater vehicle: Theory and experimental results

A discrete time-delay control (DTDC) law for a general six degrees of freedom unsymmetric autonomous underwater vehicle (AUV) is presented. Hydrodynamic parameters like added mass coefficients and drag coefficients, which are generally uncertain, are not required by the controller. This control law cancels the uncertainties in the AUV dynamics by direct estimation of the uncertainties using time-delay estimation technique. The discrete-time version of the time-delay control does not require the derivative of the system state to be measured or estimated, which is required by the continuous-time version of the controller. This particularly provides an advantage over continuous-time controller in terms of computational effort or availability of sensors for measuring state derivatives, i.e., linear and angular accelerations. Implementation issues for practical realization of the controller are discussed. Experiments on a test-bed AUV were conducted in depth, pitch, and yaw degrees of freedom. Results show that the proposed control law performs well in the presence of uncertainties.