Probabilistic compressive strength of sound dry granite

Summary The different functions of cumulative probability of fracture that can be used in the Probabilistic Strength of Materials in the case of constant uniaxial compression are described. Sound fine-grained granite was used to study volume influence by fracturing rectangular prisms, and then no noticeable influence was observed. Since this is showing that all the fracture stresses are belonging to a single set they were included in a single group that exhibited two functions of specific risk of fracture. The population with the lesser fracture stress has no critical zone while the other population does have it and a critical zone in the order of 10^–6 m³ is the minimum size exhibiting a complete fracture of the specimen when the same collapses. All the statistical functions were found to be acceptable according to theX ² criterion.     

A numerical investigation of the thermal state of the earth's mantle

An idealized convecting mantle with internal heat generation and viscosity dependent on temperature and pressure is examined with numerical calculations. Temperature and viscosity are coupled and self-regulating in the quasi-steady solutions. The lack of any tendency for upwelling flow to constrict itself to narrow channels argues against the existence of plumes. Unsteadiness is an essential feature of mantle convection, not only for mixing at large Rayleigh numbers, but also to prevent the flow from being impeded by continuous rigid regions.     

Stokes-meter observations of the solar mean magnetic field: Probable manifestations of strong small-scale magnetic fields

For many years, information on the solar mean magnetic field (SMMF) of the Sun—an important heliophysical and astrophysical parameter—was restricted to magnetographic measurements in only one spectral line, FeI λ525.02 nm. More informative observations of the Stokes-meter parameters of the SMMF were first initiated on a regular basis at the Sayan Solar Observatory. The availability of I and V data obtained simultaneously in several spectral lines has made it possible to study fundamentally new physical problems. In this paper, based on a comparison of SMMF observations in several spectral lines, we find high correlations in the data and important systematic differences in the magnetic-field strength B, which we interpret as a manifestation of kilogauss magnetic fields in fine-structure magnetic elements. Results of theoretical modeling of the SMMF strength ratios for the FeI λ525.02 nm-FeI λ524.70 nm and FeI λ630.15 nm-FeI λ630.25 nm lines are presented. The asymmetries of the V profiles of four lines near the FeI λ525.02 nm line are examined; these lines are important diagnostics for studies of small-scale dynamical processes. The Sayan Solar Observatory SMMF measurements are in good consistency with the Wilcox Solar Observatory data for 2003: for a comparison of N = 137 pairs of points in the two data sets, the correlation coefficient ρ is 0.92 for the linear regression between the datasets B_WSO = 0.03(±0.05) + 0.93(±0.03)B_SSO.     

Porphyroblast rotation during crenulation cleavage development: an example from the aureole of the Mooselookmeguntic pluton, Maine, USA

In the low‐pressure, high‐temperature metamorphic rocks of western Maine, USA, staurolite porphyroblasts grew at c. 400 Ma, very late during the regional orogenesis. These porphyroblasts, which preserve straight inclusion trails with small thin‐section‐scale variation in pitch, were subsequently involved in the strain and metamorphic aureole of the c. 370 Ma Mooselookmeguntic pluton. The aureole shows a progressive fabric intensity gradient from effectively zero emplacement‐related deformation at the outer edge of the aureole ～2900 m (map distance) from the pluton margin to the development of a pervasive emplacement‐related foliation adjacent to the pluton. The development of this pervasive foliation spanned all stages of crenulation cleavage development, which are preserved at different distances from the pluton. The spread of inclusion‐trail pitches in the staurolite porphyroblasts, as measured in two‐dimensional (2‐D) thin sections, increases nonlinearly from ～16° to 75° with increasing strain in the aureole. These data provide clear evidence for rotation of the staurolite porphyroblasts relative to one another and to the developing crenulation cleavage. The data spread is qualitatively modelled for both pure and simple shear, and both solutions match the data reasonably well. The spread of inclusion‐trail orientations (40–75°) in the moderately to highly strained rocks is similar to the spread reported in several previous studies. We consider it likely that the sample‐scale spread in these previous studies is also the result of porphyroblast rotation relative to one another. However, the average inclusion‐trail orientation for a single sample may, in at least some instances, reflect the original orientation of the overgrown foliation.     

Gold ore-forming fluids of the Tanami region, Northern Australia

Fluid inclusion studies have been carried out on major gold deposits and prospects in the Tanami region to determine the compositions of the associated fluids and the processes responsible for gold mineralization. Pre-ore, milky quartz veins contain only two-phase aqueous inclusions with salinities ≤19 wt% NaCl eq. and homogenization temperatures that range from 110 to 410°C. In contrast, the ore-bearing veins typically contain low to moderate salinity (<14 wt% NaCl eq.), H₂O + CO₂ ± CH₄ ± N₂-bearing fluids. The CO₂-bearing inclusions coexist with two-phase aqueous inclusions that exhibit a wider range of salinities (≤21 wt% NaCl eq.). Post-ore quartz and carbonate veins contain mainly two-phase aqueous inclusions, with a last generation of aqueous inclusions being very CaCl₂-rich. Salinities range from 7 to 33 wt% NaCl eq. and homogenization temperatures vary from 62 to 312°C. Gold deposits in the Tanami region are hosted by carbonaceous or iron-rich sedimentary rocks and/or mafic rocks. They formed over a range of depths at temperatures from 200 to 430°C. The Groundrush deposit formed at the greatest temperatures and depths (260–430°C and ≤11 km), whereas deposits in the Tanami goldfield formed at the lowest temperatures (≥200°C) and at the shallowest depths (1.5–5.6 km). There is also evidence in the Tanami goldfield for late-stage isothermal mixing with higher salinity (≤21 wt% NaCl eq.) fluids at temperatures between 100 and 200°C. Other deposits (e.g., The Granites, Callie, and Coyote) formed at intermediate depths and at temperatures ranging from 240 to 360°C. All ore fluids contained CO₂ ± N₂ ± CH₄, with the more deeply formed deposits being enriched in CH₄ and higher level deposits being enriched in CO₂. Fluids from deposits hosted mainly by sedimentary rocks generally contained appreciable quantities of N₂. The one exception is the Tanami goldfield, where the quartz veins were dominated by aqueous inclusions with rare CO₂-bearing inclusions. Calculated δ ¹⁸O values for the ore fluids range from 3.8 to 8.5‰ and the corresponding δD values range from −89 to −37‰. Measured δ ¹³C values from CO₂ extracted from fluid inclusions ranged from −5.1 to −8.4‰. These data indicate a magmatic or mixed magmatic/metamorphic source for the ore fluids in the Tanami region. Interpretation of the fluid inclusion, alteration, and structural data suggests that mineralization may have occurred via a number of processes. Gold occurs in veins associated with brittle fracturing and other dilational structures, but in the larger deposits, there is also an association with iron-rich rocks or carbonaceous sediments, suggesting that both structural and chemical controls are important. The major mineralization process appears to be boiling/effervescence of a gas-rich fluid, which leads to partitioning of H₂S into the vapor phase resulting in gold precipitation. However, some deposits also show evidence of desulfidation by fluid–rock interaction and/or reduction of the ore-fluid by fluid mixing. These latter processes are generally more prevalent in the higher crustal-level deposits.     

Complex Archean lower crustal structure revealed by COCORP crustal reflection profiling in the Wind River Range,Wyoming

A COCORP deep crustal reflection profile across the Wind River uplift crosses exposed Archean rocks and resolves an unusual complex deep crustal structure at a depth of 24–31 km in an area where depth relations in Precambrian rocks can be inferred. The different levels of exposure across the beveled plunge of the Wind River uplift reveal supracrustal rocks at shallower levels with migmatites and pyroxene granulites at deeper levels. For the first time, deep crustal structure from reflection profiling may be interpreted in terms of exposed basement geology. A folded, multilayered deep structure shown by relfection data resembles multiply folded pyroxene granulite interlayered with granitic gneiss exposed in the central Wind River uplift; isoclinal folding is suggested in the folded layered seismic structure. Earlier seismic reflection studies suggested a simpler lower crust. These data indicate that lower crustal structure may have a complexity similar to deeply eroded Precambrian granulite-facies rocks. If this seismic feature represents folded metamorphic rocks, it seems unlikely that this Archean crust could have been thickened by underplating after 2.7 b.y. B.P. and the crust would have to be at least 30 km thich when this structure was formed.     

Analysis of Photoelectric Occultations and Development of a Digital Model of the Lunar Libration Zone

Astronomy Reports - One of the priority tasks of modern astronomy is the observation and study of transient celestial processes, which also concerns photoelectric observations of lunar occultations...     

Glaciation and deglaciation of the SW Lake District,England: implications of cosmogenic 36Cl exposure dating

Exposure dating using cosmogenic ³⁶Cl demonstrates that the summit plateau of Scafell Pike (978 m) in the SW Lake District escaped erosion by glacier ice during the last glacial maximum (LGM; c. 26–21 kyr) and probably throughout the Devensian Glacial Stage (MIS 5d-2). Exposure ages obtained for ice-moulded bedrock on an adjacent col at 750–765 m confirm over-riding and erosion of bedrock by warm-based glacier ice during the LGM. The contrast between the two sites is interpreted in terms of preservation of tors, frost-shattered outcrops and blockfields on terrain above 840–870 m under cold-based ice. An exposure age of 17.3 ± 1.1 kyr for the col at 750–765 m suggests that substantial downwastage of the last ice sheet had occurred by c. 17 kyr, consistent with deglacial exposure ages obtained for other high-level sites in the British Isles. An exposure age of 12.5 ± 0.8 kyr obtained for a glacially transported rockfall boulder within the limits of later corrie glaciation confirms that the final episode of local glaciation in the Lake District occurred during the Loch Lomond Stade (c. 12.9–11.7 kyr). This research also demonstrated the difficulties of obtaining reliable exposure ages from rhyolite and andesite bedrock that has proved resistant to glacial abrasion.     

大别山西部河南罗山熊店加里东期榴辉岩锆石特征及SHRIMP分析结果

熊店榴辉岩产于大别山西部苏家河构造混杂岩带内,是典型的高压一超高压中温榴辉岩。作者应用岩学结合阴极发光和扫描电镜方法,较系统地研究了榴辉岩中锆石在岩石中的赋存状态、内部结构及表面特征。锆石主要产于石榴子石等变质矿物内,与主晶界面清晰,具有多晶面等变质锆石特有形貌特征,内部均或发育变质生长结构,从而说明它们是变质作用的产物。ＳＨＲＩＭＰ分析表明,锆石＾２０６Ｐｂ／＾２３８Ｕ年龄为３３５～４２４Ｍａ,