Effects of the oophagous bivalve Acesta oophaga on the morphology and fecundity of its deep‐sea tubeworm host,Lamellibrachia luymesi

The deep‐sea bivalve Acesta oophaga lives attached to the anterior end of the vestimentiferan tubeworm, Lamellibrachia luymesi, at cold methane seeps. The bivalve is found almost exclusively on female tubeworms, where it consumes the lipid‐rich eggs of L. luymesi that are spawned year round (Biological Bulletin, 209, 2005, 87). It is apparent that A. oophaga benefits directly from this close association, but the consequences for the tubeworm host may be more complicated than just a simple predator–prey interaction. Since A. oophaga completely surrounds the tube opening and plume of the worm, it is likely that its presence would limit oxygen uptake by L. luymesi, thereby inhibiting worm growth and reproduction. We hypothesized that occupied tubeworms would compensate for this by growing larger plumes for oxygen uptake. To explore the effects of bivalve presence/absence on female tubeworms, several morphological features, including body size, plume length, tube diameter, and tube segment length, as well as instantaneous fecundity, were compared. Results suggest that the mere presence of A. oophaga has a significant impact on the morphology of its host worm, as all measures of worm size, except for tube segment length, were significantly greater with clams present. Additionally, instantaneous fecundity was 3.5 times higher in occupied worms, implying that tubeworms are not oxygen‐deprived or energy limited as a result of bivalve presence. Our findings suggest that the association between these two deep‐sea organisms may be a more complex form of symbiosis than the simple predator–prey relationship, as previously thought.     

Contrasting soils and landscapes of the Piedmont and Coastal Plain, eastern United States

The Piedmont and Coastal Plain physiographic provinces comprise 80 percent of the Atlantic Coastal states from New Jersey to Georgia. The provinces are climatically similar. The soil moisture regime is udic. The soil temperature regime is typically thermic from Virginia through Georgia, although it is mesic at altitudes above 400 m in Georgia and above 320 m in Virginia. The soil temperature regime is mesic for the Piedmont and Coastal Plain from Maryland through New Jersey. The tightly folded, structurally complex crystalline rocks of the Piedmont and the gently dipping “layer-cake” clastic sedimentary rocks and sediments of the Coastal Plain respond differently to weathering, pedogenesis, and erosion. The different responses result in two physiographically contrasting terrains; each has distinctive near-surface hydrology, regolith, drainage morphology, and morphometry.The Piedmont is predominantly an erosional terrain. Interfluves are as narrow as 0.5 to 2 km, and are convex upward. Valleys are as narrow as 0.1 to 0.5 km and generally V-shaped in cross section. Alluvial terraces are rare and discontinuous. Soils in the Piedmont are typically less than 1 m thick, have less sand and more clay than Coastal Plain soils, and generally have not developed sandy epipedons. Infiltration rates for Piedmont soils are low at 6–15 cm/h. The soil/saprolite, soil/rock, and saprolite/rock boundaries are distinct (can be placed within 10 cm) and are characterized by ponding and/or lateral movement of water. Water movement through soil into saprolite, and from saprolite into rock, is along joints, foliation, bedding planes and faults. Soils and isotopic data indicate residence times consistent with a Pleistocene age for most Piedmont soils.The Coastal Plain is both an erosional and a constructional terrain. Interfluves commonly are broader than 2 km and are flat. Valleys are commonly as wide as 1 km to greater than 10 km, and contain numerous alluvial and estuarine terrace sequences that can be correlated along valleys for tens of kilometers. Coastal Plain soils are typically as thick as 2 to 8 m, have high sand content throughout, and have sandy epipedons. These epipedons consist of both A and E horizons and are 1 to 4 m thick. In Coastal Plain soils, the boundaries are transitional between the solum and the underlying parent material and between weathered and unweathered parent material. Infiltration rates for Coastal Plain soils are typically higher at 13–28 cm/h, than are those for Piedmont soils. Indeed, for unconsolidated quartz sand, rates may exceed 50 cm/h. Water moves directly from the soil into the parent material through intergranularpores with only minor channelization along macropores, joints, and fractures. The comparatively high infiltration capacity results in relatively low surface runoff, and correspondingly less erosion than on the Piedmont uplands.Due to differences in Piedmont and Coastal Plain erosion rates, topographic inversion is common along the Fall Zone; surfaces on Cenozoic sedimentary deposits of the Coastal Plain are higher than erosional surfaces on regolith weathered from late Precambrian to early Paleozoic crystalline rocks of the Piedmont. Isotopic, paleontologic, and soil data indicate that Coastal Plain surficial deposits are post-middle Miocene to Holocene in age, but most are from 5 to 2 Ma. Thus, the relatively uneroded surfaces comprise a Pliocene landscape. In the eastern third of the Coastal Plain, deposits that are less than 3.5 Ma include alluvial terraces, marine terraces and barrier/back-barrier complexes as morphostratigraphic units that cover thousands of square kilometers. Isotopic and soil data indicate that eastern Piedmont soils range from late Pliocene to Pleistocene in age, but are predominantly less than 2 Ma old. Thus, the eroded uplands of the Piedmont “peneplain” comprise a Pleistocene landscape.     

Factors controlling the adsorption of acid blue 113 dye from aqueous solution by dried <Emphasis Type="Italic">C. edulis</Emphasis> plant as natural adsorbent

Contamination of surface water and groundwater by organic pollutants is a serious problem due to their persistence, bioaccumulation and biomagnification through food webs. Since the removal of dyes from wastewater is considered an environmental challenge and government legislation requires textile wastewater to be treated, therefore there is a constant need to have an effective process that can efficiently remove these dyes. The aim of the present study is to evaluate the potentiality of dried Carpobrotus edulis plant as low-cost adsorbent for the removal of the industrial acid blue 113 dye from aqueous solutions using the batch equilibration technique. The effects of different physicochemical parameters such as adsorbent dose, contact time, initial dye concentration, solution pH and temperature on adsorption rate of anionic AB113 dye on microparticles of dried C. edulis plant were investigated. The experimental data were analyzed by using mathematical models to determine the thermodynamic parameters. The negative values of free energy change indicated the spontaneous nature of the adsorption and negative value of enthalpy change suggested the exothermic nature of the adsorption process. These results indicate that dried C. edulis plant as an environmentally friendly adsorbent could be potentially used for the removal of anionic dyes from aqueous solutions.     

Joint parameter estimation from magnetic resonance and vertical electric soundings using a multi‐objective genetic algorithm

Magnetic resonance sounding (MRS) has increasingly become an important method in hydrogeophysics because it allows for estimations of essential hydraulic properties such as porosity and hydraulic conductivity. A resistivity model is required for magnetic resonance sounding modelling and inversion. Therefore, joint interpretation or inversion is favourable to reduce the ambiguities that arise in separate magnetic resonance sounding and vertical electrical sounding (VES) inversions. A new method is suggested for the joint inversion of magnetic resonance sounding and vertical electrical sounding data. A one‐dimensional blocky model with varying layer thicknesses is used for the subsurface discretization. Instead of conventional derivative‐based inversion schemes that are strongly dependent on initial models, a global multi‐objective optimization scheme (a genetic algorithm [GA] in this case) is preferred to examine a set of possible solutions in a predefined search space. Multi‐objective joint optimization avoids the domination of one objective over the other without applying a weighting scheme. The outcome is a group of non‐dominated optimal solutions referred to as the Pareto‐optimal set. Tests conducted using synthetic data show that the multi‐objective joint optimization approximates the joint model parameters within the experimental error level and illustrates the range of trade‐off solutions, which is useful for understanding the consistency and conflicts between two models and objectives. Overall, the Levenberg‐Marquardt inversion of field data measured during a survey on a North Sea island presents similar solutions. However, the multi‐objective genetic algorithm method presents an efficient method for exploring the search space by producing a set of non‐dominated solutions. Borehole data were used to provide a verification of the inversion outcomes and indicate that the suggested genetic algorithm method is complementary for derivative‐based inversions.     

Simplified approach for design of raft foundations against fault rupture. Part Ⅰ: free-field

Over the past few decades, earthquake engineering research mainly focused on the effects of strong seismicshaking. After the 1999 earthquakes in Turkey and Taiwan, and thanks to numerous cases where fault rupture causedsubstantial damage to structures, the importance of faulting-induced deformation has re-emerged. This paper, along withits companion (Part Ⅱ), exploits parametric results of finite element analyses and centrifuge model testing in developing afour-step semi-analytical approach for analysis of dip-slip (normal and thrust) fault rupture propagation through sand, itsemergence on the ground surface, and its interaction with raft foundations. The present paper (Part Ⅰ) focuses on the effectsof faulting in the absence of a structure (i.e., in the free-field). The semi-analytical approach comprises two-steps: the firstdeals with the rupture path and the estimation of the location of fault outcropping, and the second with the tectonically-induced displacement profile at the ground surface. In both cases, simple mechanical analogues are used to derive simplifiedsemi-analytical expressions. Centrifuge model test data, in combination with parametric results from nonlinear finite elementanalyses, are utilized for model calibration. The derived semi-analytical expressions are shown to compare reasonably wellwith more rigorous experimental and theoretical data, thus providing a useful tool for a first estimation of near-fault seismichazard.     

Isotopic and other geochemical evidence for the origin of the Loch Uisg Granophyre,Isle of Mull,Scotland

Full chemical analyses, including some trace elements and both oxygen and strontium isotope abundance data are presented for samples collected from a traverse across the outcrop of the early Tertiary Loch Uisg Granophyre. Chemically, the body is rhyodacite with very uniform major and trace element composition. In contrast, depleted δ¹⁸O values vary widely from +1.5‰ in the south to ?3.7‰ in the north (a distance of about 21/2 km), a range comparable to that for the intrusive rocks of Mull as a whole. This indicates more extensive groundwater interaction (i.e. higher water/rock ratios and/or higher temperatures of isotope exchange) towards the focus of the central intrusive complex. There is some degree of correlation between δ¹⁸O and iron oxidation ratios but no other evidence that the primary igneous geochemistry of these rocks has been significantly modified by hydrothermal alteration after emplacement of the pluton. Initial⁸⁷Sr/⁸⁶Sr ratios range from 0.71350 ± 9 to 0.71624 ± 6 and correlate with both Rb content and Rb/Sr ratio, the latter correlation yielding a pseudo-isochron of 260 ± 54 Ma at the time of emplacement. These results confirm a major contribution from an old crustal source region, ruling out formation of the granophyre solely from a basic parent magma. However, Rb-Sr data are presented for the Moine schists exposed in Mull and Morvern which also appear to rule out their involvement in the petrogenesis of the granophyre, either as a source region for melting, or as a bulk contaminant for a mantle-derived magma. The only viable hypotheses are assimilation at depth of? Lewisian into a basaltic fractionation sequence or partial melting of a Proterozoic basement such as that involved in the production of Caledonian granites in the Scottish Highlands.