A temporally second-order accurate Godunov-type scheme for solving the extended Boussinesq equations

A numerical scheme for solving the class of extended Boussinesq equations is presented. Unlike previous schemes, where the governing equations are integrated through time using a fourth-order method, a second-order Godunov-type scheme is used thus saving storage and computational resources. The spatial derivatives are discretised using a combination of finite-volume and finite-difference methods. A fourth-order MUSCL reconstruction technique is used to compute the values at the cell interfaces for use in the local Riemann problems, whilst the bed source and dispersion terms are discretised using centred finite-differences of up to fourth-order accuracy. Numerical results show that the class of extended Boussinesq equations can be accurately solved without the need for a fourth-order time discretisation, thus improving the computational speed of Boussinesq-type numerical models. The numerical scheme has been applied to model a number of standard test cases for the extended Boussinesq equations and comparisons made to physical wave flume experiments.     

Influence of discrete step size on wind setup component of storm surge

Open coast storm surge water levels consist of wind setup due to wind shear at the water surface; a wave setup component caused by wind induced waves transferring momentum to the water column; an atmospheric pressure head component due to the atmospheric pressure deficit over the spatial extent of the storm system; a Coriolis forced setup or setdown component due to the effects of the rotation of the earth acting on the wind driven alongshore current at the coast; a possible seiche component due to resonance effects initiated by moving wind system, and, if astronomical tides are present, an astronomical tide component (although the tide is typically considered to be a forced astronomical event and not really a direct part of the external wind-driven meteorological component of storm surge). Typically the most important component of a storm surge is the wind setup component, especially on the U.S. East Coast and the Gulf of Mexico shorelines. In many approaches to storm surge modeling, a constant depth approximation is invoked over a limited step size in the computational domain. The use of a constant depth approximation has received little attention in the literature although can be very important to the resulting magnitude of the computed storm surge. The importance of discrete step size to the wind setup storm surge component is considered herein with a simple case computation of the wind setup component on a linear slope offshore profile. The present study findings show that the constant depth approximation to wind setup storm surge estimation is biased on the low side (except in extremely shallow water depths) and can provide large errors if discrete step size is not sufficiently resolved. Guidance has been provided on the error that one might encounter for various step sizes on different slopes.     

Effects of Cystoseira Sensu lato (Fucales: Phaeophyceae) on Species Richness,Composition, and Biomass of Abrau Peninsula Shelf Macrophytobenthic Communities (Black Sea)

Oceanology - Field observations were applied to study the macrophytobenthos of the Abrau Peninsula of the Black Sea and the effect of the two most common and largest species of brown algae of the...     

Seasonal Dynamics of Red Blood Parameters in Healthy People in Regions with Different Types of Climate: a Meta-Analysis

Izvestiya, Atmospheric and Oceanic Physics - It is known that in mammals living in climates other than tropical, hemoconcentration is usually observed in winter. The average modern person actively...     

Using Hydrogeochemical Methods To Evaluate Complex Quaternary Subsurface Stratigraphy Block Island,Rhode Island,USA

One of the major problems in hydrogeologic investigations of glaciated regions is the determination of complex stratigraphic relationships in the subsurface where insufficient information is available from drilling and geophysical records. In this paper, chemical characteristics of groundwater were used to identify stratigraphic changes in glacial deposits that were previously inferred on Block Island, Rhode Island, USA, an emergent remnant of the late Wisconsinan terminal moraine, located approximately 16 km south of the Rhode Island mainland. Two chemically distinct water types are recognized on the island: 1) high-iron, characterized by dissolved silica levels in excess of 20 mg/L, bicarbonate greater than 30 mg/L and dissolved iron ranging from 1-20 mg/L; and 2) low-iron, characterized by dissolved silica levels below 16 mg/L, bicarbonate less than 30 mg/L, and less than 0.3 mg/L dissolved iron. The spatial distribution of iron-bearing minerals and organic matter and the resulting redox conditions are believed to control the occurrence of high-iron groundwater. The high-iron waters occur almost exclusively in the eastern half of the island and appear to coincidence with the presence of allochthonous blocks of Cretaceous-age coastal-plain sediments that were incorporated into Pleistocene-age deposits derived from the Narragansett Bay-Buzzard's Bay lobe of the Late Wisconsinan Laurentide ice sheet. The low-iron waters occur in the western half of the island, where the occurrence of these Cretaceous-age blocks is rare and the sediments are attributed to a sublobe of the Hudson-Champlain lobe of the Late Wisconsinan ice-sheet. RÉSUMÉ: L'un des principaux problèmes dans les études hydrogeologiques des régions qui ont été englacées est la définition des relations stratigraphiques complexes sous la surface, lá où les informations fournies par les forages et par la géophysique sont insuffisantes. Dans l'exemple traité, les caractéristiques chimiques de l'eau souterraine sont utilisées pour identifier les variations stratigraphiques dans les dépôts glaciaires qui avaient auparavant été supposées, sur l'île de Block (Rhode Island), restes émergeant d'une moraine terminale du Wisconsinien récent, situé à environ 16 km au sud de Rhode Island. Deux types d'eau chimiquement distincts ont été reconnus dans l'île: 1) à fortes teneurs en fer, caractérisées par des concentrations en silice supérieures à 20 mg/L, en bicarbonates supérieures à 30 mg/L et en fer comprises entre 1 et 20 mg/L; et 2) à faibles teneurs en fer, marquées par des concentrations en silice inférieures à 16 mg/L, en bicarbonate inférieures à 30 mg/L et en fer dissous inférieures à 0.3 mg/L. La distribution spatiale des minéraux riches en fer et de la matière organique et les conditions redox résultantes contrôlent probablement la présence de fer dans les eaux souterraines à fortes concentrations. Les eaux à fortes teneurs en fer sont connues presque exclusivement dans la moitié orientale de l'île et semblent coïncider avec la présence de blocs allochtones provenant des sédiments côtiers crétacés, introduits dans les formations pléistocènes liées au lobe glaciaire des baies de Narragansett et du Busard de la calotte glaciaire laurentide du Wisconsinien récent. Les eaux à faibles teneurs en fer apparaissent dans la moitié occidentale de l'île, là où ces blocs de Crétacé sont rares et où les sédiments sont attrbués à une digitation du lobe de l'Hudson-Champlain de la calotte glaciaire du Wisconsinien récent. RESUMEN: Uno de los mayores problemas en la investigación hidrogeológica en regiones glaciares es la determinación de las complejas relaciones estratigráficas en el subsuelo, donde la información procedente de registros de perforaciones y de geofísica no es suficiente. En este artículo, se han usado las características químicas del agua subterránea para identificar unos cambios estratigráficos que se habían predicho previamente en unos depósitos glaciares en Block Island, Rhode Island (Estados Unidos), un remanente emergente de la morrena terminal del Winsconsiniense tardío, situada unos 16 km al sur de la Rhode Island continental. En la isla se encuentran dos tipos de agua distintos: 1) de alto contenido en hierro, caracterizada por niveles de sílice disuelto superando los 20 mg/L, bicarbonatos por encima de 30 mg/L y hierro disuelto oscilando entre 1-20 mg/L; y 2) de bajo contenido en hierro, caracterizada por niveles de sílice disuelto inferiores a 16 mg/L, bicarbonatos por debajo de 30 mg/L y menos de 0.3 mg/L de hierro disuelto. La distribución espacial de los minerales ricos en hierro y de la materia orgánica, así como las condiciones redox resultantes se supone que condicionan la presencia de aguas de alto contenido en hierro. Estas aguas aparecen casi exclusivamente en la mitad oriental de la isla y parecen coincidir con la presencia de bloques alóctonos de sedimentos costeros, de edad cretácica, que se incorporaron a los depósitos de edad pleistocena procedentes del lóbulo de la Bahía de Narragansett-Bahía de Buzzard, correspondiente a la capa glaciar del Winsconsiniense-Lauréntido tardío. Las aguas de bajo contenido en hierro aparecen en la mitad occidental de la isla, donde la presencia de estos sedimentos de edad cretácica es rara y los sedimentos se suponen procedentes de un sublóbulo del lóbulo de Hudson-Camplain, correspondiente a la capa glaciar del Winsconsiniense tardío.     

Comparative toxicities of chlorinated biphenyls on sea urchin egg fertilisation and embryogenesis

The aim of this study was to compare the biological actions of selected chlorinated biphenyls (CB's) (with different degrees of chlorine substitution), using the sea urchin test system, for their ability to affect fertilisation, embryogenesis and mitotic activity. Sea urchin embryos were exposed to the test agents throughout larval development or for shorter intervals (e.g. before or after hatching). Sperm or eggs were exposed before fertilisation, thereafter the contaminants were removed from embryo cultures. The results showed maximal activities from medium-chlorinated (tetra- and hexachloro-substituted) compounds, as compared to low- and high-chlorinated biphenyls (mono-, di- and octachloro-substituted), at nominal levels ranging from 10⁻⁶m to 10⁻⁵m. This held true for the different parameters and treatment schedules. Developmental defects were only detected following post hatching exposure of embryos to CB's, whereas pre-hatching exposure failed to reveal any embryological or cytogenetic abnormalities.     

The capacity of marine plankton, macrophytes and particulate matter to adsorb Cu in the presence of Mg

A complexometric titration technique was employed to measure the total capacity of a variety of marine organisms to adsorb Cu²⁺. Measured adsorption capacities were 0.22 meq g⁻¹ for phytoplankton, 0.3–1.0 meq g⁻¹ for macrophytes, 1.0–2.5 meq g⁻¹ for zooplankton and 0.3 meq g⁻¹ for suspended particulate matter. The capacity of these materials to adsorb Cu²⁺ was reduced significantly in the presence of Mg²⁺ at seawater concentrations. Competition between Mg^t2+ and Cu²⁺ for adsorption sites at pH 6 is described by an average conditional equilibrium constant of 10^3.7. This constant is such that very little Cu²⁺ may be adsorbed onto particulates and marine phytoplankton in the presence of Mg²⁺. Further, primary productivity data and estimates of the detrital carbon sedimentation in Long Island Sound suggest that the flux of particulate carbon is insufficient to remove significant amounts of Cu from the water column to sediments by adsorption mechanisms.     

A hydrodynamic model of a submerged lenticular wave energy device

The wavemaking capability and energy absorbing characteristics of a single submerged body, constrained to move horizontally in a surge mode, are examined. The body possesses both a vertical axis of symmetry and a horizontal plane of symmetry and is ‘thin’ in the sense that the body draft is small compared to the length. The behaviour of a single body subject to a constraint being placed upon the amplitude of its displacement and the properties of an array of interacting identical devices are also discussed.     

Estimation of winds over the sea from land-based measurements

Simultaneous measurements of wind velocities at two different sites, one over the sea and the other over land, can differ substantially and therefore cannot be interchanged. In situations where the wind data at an offshore site are missing while simultaneous measurements from a land-based station exist, a linear mean-square estimation (LMSE) technique can be used to estimate the missing data. This technique relies on past wind data gathered simultaneously at the two locations, and it generates from the associated correlation a set of four transfer functions capable of predicting one data set from the other. In the present case, the LMSE technique is outlined briefly, and is then applied to construct seasonal transfer functions between a land-based station and two coastal/offshore sites in Kuwait. Comparisons between the actually observed wind characteristics and those predicted by the LMSE technique are favorable, and thus tend to confirm the applicability of the technique under appropriate conditions.