A locking-compass for in situ sample orientation

A mechanically-actuated locking-compass was designed for mounting on corers to record equipment orientation during the sampling process, thereby providing magnetic orientation data on the recovered deep-sea core. Locking occurs upon impact by the corer with the sea-floor; after retrieval, the device is easily unlocked and reset for another station. Compass construction makes use of commercially available parts, requires no welding and little machining, and thus allows inexpensive and easy assembly at sea.     

Ocean bottom refraction seismograph (OBRS)

This paper describes a pop-up ocean bottom seismograph designed primarily for refraction surveys both on the continental shelf and in deep sea. Its development is the extension of our system based on seismic detectors located on the sea floor with radio transmission of seismic signals and used for seismic refraction studies on the continental shelf. The seismic detectors (vertical geophone or hydrophone and two orthogonally mounted horizontal geophones) are located outside of the pressure vessel on the main frame. Optionally, the seismic sensors may be decoupled from the main frame assembly. This decoupling is performed by a mobile arm positioning the separate three component sensor package on the sea floor.Contribution No. 455 of the Département Scientifique, Centre Océanologique de Bretagne.     

Improved in situ gamma-ray transmission densitometer for marine sediments

The first-generation University of Illinois gamma-ray transmission densitometer, designed for the in situ measurement of sediment bulk density, was modified by incorporating in the detector probe (1) an Americium-241 alpha particle pulser and an anti-walk gain stabilization control to maintain better temperature stability and (2) a small power supply and a IC preamplifier to eliminate the need for a high-voltage coaxial cable between the detector and external signal conditioning electronics package. This second-generation Lehigh University system has been successfully deployed since 1971 in routine use from ships and submersibles in the Atlantic and Pacific Oceans and the Gulf of Mexico. Results are presented of system operations to (1) measure bulk density over the range of 1.2–1.8 Mg/m³ in the Hudson Canyon, (2) penetrate 1.9 m into the seafloor in the San Diego trough and, (3) be lowered to a water depth of 3.6 km in the Gulf of Mexico.     

Paleomagnetic events in the brunhes and Matuyama epochs identified from magnetic profiles reduced to the pole

Eleven oceanic magnetic profiles associated with the paleomagnetic time scale younger than the beginning of the Matuyama epoch (2.43 my) have been reduced to the pole, altered to conform to a 3 cm yr^-1 spreading rate, and then all halves added and averaged to obtain a representative symmetric magnetic profile. This final stacked profile emphasizes the subtle anomalies associated with minor paleomagnetic events and minimizes randomly occurring anomalies. The axial anomaly of the stacked profile shows no evidence of the Laschamp event (centered at 0.025 my); however, a minimum at 0.15 my may correspond to the Blake event. A physical model of the stacked magnetic profile consists of a thin, highly magnetized layer with a 40% magnetization decrease at 10 km from the profile center. Magnetization values were modified from Irving and Talwani and the Blake event included. The stacked profile shows two minor anomalies centered at 1.97 my and 2.17 my. The younger anomaly corresponds with the younger Olduvai event (centered at 1.965 my) on the Cox time scale and the W anomaly (centered at 1.99 my) of Emilia and Heinrichs. The older anomaly lies between the older Olduvai event (2.12 my) of Cox and the X anomaly of Heirtzler, and Emilia and Heinrichs; additional work is required to assess the significance of this older event.This material was presented at the Fall Annual Meeting of the American Geophysical Union, December 8, 1971.