A design procedure for tied braced frames

The paper deals with the analysis of the seismic behaviour and design of tied braced frames (TBFs). The behavioural properties of TBFs are described and a comparison drawn with standard eccentrically braced frames. A design procedure is then proposed that aims to achieve optimal collapse seismic behaviour, i.e. a global collapse mechanism characterized by uniform plastic rotations of links. The procedure is based on the displacement‐based approach so as to achieve direct and efficient control of the peak ground acceleration of collapse. Applications are carried out on systems with different numbers of storeys and lengths of links to obtain confirmation of the accuracy of the design hypotheses and methodologies. Copyright © 2007 John Wiley & Sons, Ltd.     

Attenuation tomography: An application to gas-hydrate and free-gas detection

We estimate the quality factor (Q) from seismic reflections by using a tomographic inversion algorithm based on the frequency‐shift method. The algorithm is verified with a synthetic case and is applied to offshore data, acquired at western Svalbard, to detect the presence of bottom‐simulating reflectors (BSR) and gas hydrates. An array of 20 ocean‐bottom seismographs has been used. The combined use of traveltime and attenuation tomography provides a 3D velocity–Q cube, which can be used to map the spatial distribution of the gas‐hydrate concentration and free‐gas saturation. In general, high P‐wave velocity and quality factor indicate the presence of solid hydrates and low P‐wave velocity and quality factor correspond to free‐gas bearing sediments. The Q‐values vary between 200 and 25, with higher values (150–200) above the BSR and lower values below the BSR (25–40). These results seem to confirm that hydrates cement the grains, and attenuation decreases with increasing hydrate concentration.     

A comparative analysis of three habitat suitability models for commercial yield estimation of Tapes philippinarum in a North Adriatic coastal lagoon (Sacca di Goro, Italy)

Habitat Suitability (HS) models have been extensively used by conservation planners to estimate the spatial distribution of threatened species and of species of commercial interest. In this work we compare three HS models for the estimation of commercial yield potential and the identification of suitable sites for Tapes philippinarum rearing in the Sacca di Goro lagoon (Italy) on the basis of six environmental factors. The habitat suitability index (HSI) is based on expert opinion while the habitat suitability conditional (HSC) is calibrated on observational data. The habitat suitability mixed (HSM) model is a two-part model combining expert knowledge and regression analysis: the first component of the model uses logistic regression to identify the areas in which clams are likely to be present; the second part applies the same parameter-specific suitability functions of the HSI model only in the areas previously identified as productive by the logistic component.The HS models were validated on an independent data set and estimates of potential yield of the Goro lagoon were compared. The effectiveness of the three approaches is then discussed in terms of predicted yield and identification of suitable sites for farming.     

On the MHD Acceleration of Astrophysical Jets

We present a 2.5D magnetohydrodynamic (MHD) simulation of the acceleration of a collimated jet from a magnetized accretion disk. We employ a MHD Adaptive Mesh Refinement (AMR) code (FLASH—University of Chicago). Thanks to this tool we can follow the evolution of the system for many dynamical timescales with a high-spatial resolution. Assuming an initial condition in which a Keplerian disk, thus with no accretion motions, is threaded by a uniform poloidal magnetic field, we show how both the accretion flow and the acceleration of the outflow occur, and we present in detail which are the forces responsible for the jet launching and collimation. Our simulation also shows how the collimating forces due to the self-generated toroidal magnetic field can produce some peculiar knotty features.     

Ground motion prediction with the empirical Green's function technique: an assessment of uncertainties and confidence level

An assessment of uncertainties for ground motion predictions with the aid of the empirical Green's function (EGF) technique is presented. The main input parameters were identified, and their respective uncertainties were assessed by means of an international expert inquiry. The repercussion of these input uncertainties on the final ground motion estimates were investigated by means of the Latin Hypercube Sampling technique. The mean ground motion estimates (response spectra) and their standard deviations were compared with results obtained from empirical attenuation laws. The most sensitive input parameter turned out to be the seismic moment corresponding to the EGF. In general, if the source parameters are well determined, equivalent uncertainties, statistically speaking, can be expected from the EGF technique and from the application of attenuation laws. Therefore, if EGFs with well known source parameters are available, the EGF technique seems to be preferable: site effects are automatically taken into account, and physically realistic acceleration time histories can be obtained. However, further investigations on the reliability of the EGF technique should be performed, and finally, it is recalled that the EGF technique is based on the assumption of linearity. If conditions are such that this assumption cannot be maintained, the EGF technique should be combined with non-linear geotechnical methods.     

Ecological evaluation of an experimental beneficial use scheme for dredged sediment disposal in shallow tidal waters

An experiment was performed to test an alternative dredging strategy for the Westerschelde estuary. Clean sand dredged from the navigation channel was disposed seawards of an eroding intertidal flat in order to modify morphology and hydrodynamics, improving the multi-channel system with ecologically productive shallow water habitat. Five years of intensive monitoring revealed that part of the disposed sediment moved slowly towards the flat, increasing the very shallow subtidal and intertidal area, as planned. The sand in the impact zone became gradually finer after disposal, possibly due to reduced current velocities. Nevertheless, no changes in macrobenthic biomass, density, species richness and composition were detected in the subtidal zone, also demonstrating rapid macrobenthic recovery. In the intertidal zone, no ecological effects could be revealed superimposed on trends associated with long-term sediment fining. Thus, despite morphological success and absence of detected negative ecological impacts of the experiment, new beneficial habitat was not created.     

Seismic characterization of rigid sites in the ITACA database by ambient vibration monitoring and geological surveys

The problem of seismic characterization of rock-mass or stiff-soil outcrops by the use of passive seismic prospecting techniques is discussed. Difficulties in the application of this kind of procedure in the presence of rugged morphology, high surface wave velocities and low ambient vibration powers, typical of stiff-soil/rock-mass sites are examined. A methodology to face these problems is here proposed, which is based on the strict synergy of detailed geologic surveys and application of robust seismic prospecting techniques, jointly considering single-station and multi-station tools. The application of this approach for the characterization of a number of sites belonging to the Italian Accelerometric Network is described, focusing on two representative case histories.     

The application of foraminifera to reconstruct the rate of 20th century sea level rise, Morbihan Golfe, Brittany, France

Foraminiferal assemblages preserved within salt-marsh sediment can provide an accurate and precise means to reconstruct relative sea level due to a strong relationship with elevation, which can be quantified using a transfer function. We collected a set of surface samples from two salt marshes in the Morbihan Golfe, France to determine foraminiferal distribution patterns. Dominant taxa included Jadammina macrescens, Trochammina inflata, Haplophragmoides spp. and Miliammina fusca. We developed a foraminifera-based transfer function using a modern training set of 36 samples and 23 species. The strong relationship between observed and predicted values (r²_jack = 0.7) indicated that foraminiferal distribution is primarily controlled by elevation with respect to the tidal frame and precise reconstructions of former sea level are possible (RMSEP_jack = 0.07 m). The application of the transfer function to a short salt-marsh core (0.32 m) allowed the reconstruction of former sea levels, which were placed in a chronological framework using short-lived radionuclides (²¹⁰Pb and ¹³⁷Cs). The agreement between the foraminifera-based sea level curve and the Brest tide-gauge record confirms the reliability of transfer function estimates and the validity of this methodology to extend sea level reconstructions back into the pre-instrumental period. Both instrumental and microfossil records suggest an acceleration of sea level rise during the 20th century.