Ephemeral rollover points and clinothem evolution in the modern Po Delta based on repeated bathymetric surveys

Reconstructions of ancient delta systems rely typically on a two-dimensional (2D) view of prograding clinothems but may miss their three-dimensional (3D) stratigraphic complexity which can, instead, be best documented on modern delta systems by integrating high-resolution geophysical data, historical cartography, core data and geomorphological reconstructions offshore. We quantitatively compare three precisely positioned, high-resolution multi-beam bathymetry maps in the delta front and pro delta sectors (0.3 to 10 m water depth) of Po di Pila, the most active of the modern Po Delta five branches. By investigating the detailed morphology of the prograding modern Po Delta, we shed new light on the mechanisms that control the topset to foreset transition in clinothems and show the temporal and spatial complexity of a delta and its pro delta slope, under the impact of oceanographic processes. This study documents the ephemeral nature of the rollover point at the transition between sandy topset (fluvial, delta plain to mouth-bar) and muddy seaward-dipping foreset deposits advancing, in this case, in >20 m of water depth. Three multibeam surveys, acquired between 2013 and 2016, document the complexity in space and time of the topset and foreset regions and their related morphology, a diagnostic feature that could not be appreciated using solely 2D, even very high-resolution, seismic profiles. In addition, the comparison of bathymetric surveys gathered with one-year lapses shows the migration of subaqueous sand dunes on the clinothem topset, the formation of ephemeral cut-and-fill features at the rollover point (few m below mean sea level), the presence of collapse depressions derived by sagging of sediments and fluid expulsion (possibly induced by storm waves) on the foreset, and splays of sand likely reflecting gravity flows on the lower foreset. Though the modern Po Delta is anthropogenic in many respects, its subaqueous clinothem can be studied as a scale model for ancient clinothems that are less resolved geometrically and far less constrained chronologically.     

Long‐term temporal and spatial patterns in bioeroding sponge distribution at the Abrolhos Bank,Brazil, Southwestern Atlantic

Bioeroding sponges belong to the most dominant bioeroders, significantly contributing to the erosion of coral reefs. Some species are tolerant or even benefit from environmental conditions such as ocean warming, acidification, and eutrophication. In consequence, increases in sponge bioerosion have been observed on some coral reefs over the last decades. The Abrolhos Bank is the largest coral reef system in the South Atlantic. It has been affected by sedimentation, eutrophication, overfishing, and climate change, mainly affecting coastal reefs, and at lesser intensity outer ones as well. This study aimed to describe spatial and temporal patterns in bioeroding sponge distribution in carbonate substrates in the Abrolhos Bank. Photo‐quadrats were used to compare bioeroding sponge abundance between two shallow reefs: a coastal, Pedra de Leste (PL), and an outer reef, Parcel dos Abrolhos (PAB). Each individual was delimitated over the substrate by determining the sponge surface through a line connecting the outermost papillae. The study was conducted over 6 years in 2008–2009 and 2013–2016. Four species of bioeroding sponges were identified: Cliona carteri Ridley, 1881, C. delitrix Pang, 1973, C. cf. schmidtii Ridley, 1881, and Siphonodictyon coralliphagum Rützler, 1971. The distribution and abundance of species varied between the inner and outer reefs and across the years, and displayed certain selectivity for the calcareous substrates recorded. Crustose coralline algae (CCA) were the main substrate excavated by the most abundant bioeroding species, C. carteri, and represented 70% of the substrate types occupied by this sponge (CCA, coral overgrown by CCA and plain coral). The highest abundance of bioeroding sponges observed in photo‐quadrats was 21.3 individuals/m² at the outer reefs (PAB) in 2014. The abundances or areal extents of bioeroding sponges were up to 10 times greater on the outer reefs than on the coastal ones, where sedimentation is higher and more strongly influenced by siliciclastic material. Moreover, a higher herbivorous fish biomass has been reported on outer reefs which could also influence the higher abundance of bioeroding sponges in outer reefs. During the study period of 6 years, an increase in bioeroding sponge abundance was observed at the outer reefs (PAB), with the sea surface temperature increase. As CCA have an important role in reefal cementation and carbonate production in the Abrolhos reefs, a bioerosion impact might be expected, in particular, on the outer reefs.     

The role of two sediment-dwelling invertebrates on the mercury transfer from sediments to the estuarine trophic web

The annual total and organic mercury bioaccumulation pattern of Scrobicularia plana and Hediste diversicolor was assessed to evaluate the potential mercury transfer from contaminated sediments to estuarine food webs. S. plana was found to accumulate more total and organic mercury than H. diversicolor, up to 0.79 mg kg⁻¹ and 0.15 mg kg⁻¹ (wet weight) respectively, with a maximum annual uptake of 0.21 mg kg⁻¹ y⁻¹, while for methylmercury the annual accumulation was similar between species and never exceeded 0.045 mg kg⁻¹ y⁻¹. The higher organic mercury fraction in H. diversicolor is related to the omnivorous diet of this species. Both species increase methylmercury exposure by burrowing activities and uptake in anoxic, methylmercury rich sediment layers. Integration with the annual biological production of each species revealed mercury incorporation rates that reached 28 μg m⁻² y⁻¹, and to extract as much as 11.5 g Hg y⁻¹ (of which 95% associated with S. plana) in the 0.4 km² of the most contaminated area, that can be transferred to higher trophic levels. S. plana is therefore an essential vector in the mercury biomagnification processes, through uptake from contaminated sediments and, by predation, to transfer it to economically important and exploited estuarine species.     

The particle background of the <Emphasis Type="Italic">X-IFU</Emphasis> instrument

In this paper we are going to review the latest estimates for the particle background expected on the X-IFU instrument onboard of the ATHENA mission. The particle background is induced by two different particle populations: the so called “soft protons” and the Cosmic rays. The first component is composed of low energy particles (< 100s keV) that get funnelled by the mirrors towards the focal plane, losing part of their energy inside the filters and inducing background counts inside the instrument sensitivity band. The latter component is induced by high energy particles (> 100 MeV) that possess enough energy to cross the spacecraft and reach the detector from any direction, depositing a small fraction of their energy inside the instrument. Both these components are estimated using Monte Carlo simulations and the latest results are presented here.     

Serpentinite

Serpentinites are metamorphic rocks formed from the alteration of ultramafic igneous rocks. Their precursors largely consist of clinopyroxene, orthopyroxene, olivine and a member of the spinel group, along with other accessory minerals. Serpentinization can be produced through the percolation of fluids of different origins. The transformation gives rise to other rocks, serpentinites, that are characterized by a high‐water content mineralogy (serpentine) and, sometimes, remnants of the original phases. However, serpentinites may also undergo a subsequent carbonation process, transforming most of the mineral phases into carbonates. This is why confusion may arise when dealing with these rocks in the industrial sector, where geologists are not often involved. Serpentinites are often found in natural stone catalogues under the name of ‘green marble’ and this can be misinterpreted by builders and architects, causing misuse of this rock as an ornamental stone.     

Estimating impacts of warming temperatures on California's electricity system

Despite a clear need, little research has been carried out at the regional-level to quantify potential climate-related impacts to electricity production and delivery systems. This paper introduces a bottom-up study of climate change impacts on California's energy infrastructure, including high temperature effects on power plant capacity, transmission lines, substation capacity, and peak electricity demand. End-of-century impacts were projected using the A2 and B1 Intergovernmental Panel on Climate Change emission scenarios. The study quantifies the effect of high ambient temperatures on electricity generation, the capacity of substations and transmission lines, and the demand for peak power for a set of climate scenarios. Based on these scenarios, atmospheric warming and associated peak demand increases would necessitate up to 38% of additional peak generation capacity and up to 31% additional transmission capacity, assuming current infrastructure. These findings, although based on a limited number of scenarios, suggest that additional funding could be put to good use by supporting R&D into next generation cooling equipment technologies, diversifying the power generation mix without compromising the system's operational flexibility, and designing effective demand side management programs.     

Vertical distribution features of atmospheric water vapour in the Po valley area

Two sets of radiosounding measurements, taken at different hours from some stations in the Po Valley area, were examined in order to obtain the values of precipitable waterw and determine the shapes of the vertical distribution curves of absolute humidity. From these curves, we calculated the bestfit values of scale heightsH ₁ andH ₂ in the 0÷5 km and 5÷10 km altitude intervals, respectively. The analysis of the radiosounding data clearly shows that parametersw andH ₁ are closely related to the evolutionary features of the meteorological conditions on synoptic scale and are influenced, to a lesser extent, by the diurnal variations in the atmospheric ground layer. Seasonal average curves of temperature and absolute humidity, as functions of altitude, were also defined from the radiosounding measurements taken at various hours of the day. Moreover, interpolation methods in time (applied to a 12-hour range) and in space (range of about 300 km) were proposed for determining parametersw andH ₁ from the radiosounding measurements taken at different hours from the same station or from different stations at the same hour. Reliability tests, made by comparing the same station or from different stations at the same hour. Reliability tests, made by comparing the values given by the interpolation methods with those directly obtained from the radiosounding measurements, show that these evaluations ofw andH ₁ are affected by standard errors of estimate, which are comparable to the errors usually made in analyzing the radiosounding data.     

Mechanisms of shear failure in artificial fractures of sandstone and their implication for models of hydromechanical coupling

Summary Direct shear tests, in which the behaviour of the rock surfaces during shear could be continuously observed, were used to study the shear failure of a profiled and clean discontinuity artificially prepared from natural sandstone. Displacement transducers were used to measure the normal and shear displacements. A series of strain gauges glued on the sides of the upper block provided information on the change of the stress field occurring close to the discontinuities whilst shear displacement increased, and these changes were then compared with the behaviour of the profiled surface. The results of the laboratory tests, the sequence of photographs taken for most of them, and the results conducted with a sample of similar shape made from the same rock material and tested in a rotary shear machine, allowed several stages and mechanisms of failure to be defined: static friction and mobilization of initial shear stiffness; mobilization of sliding; mobilization of brittle fracture; post-peak failure of the teeth; descent of the teeth; gliding and ploughing; commencement of second cycle of shearing. In many respects these stages are similar to those occurring between sliding surfaces of metal and suggest that the analyses developed in tribology may be relevant to the development of constitutive models for predicting the hydromechanical coupled behaviour of a discontinuity with shear displacement. Such models will have to consider these different stages of shear, because the original discontinuity changes its geometry with displacement and is filled with gouge which changes its grain size with displacement.     

The Amazon river breeze and the local boundary layer: I. Observations

Observations of the diurnal evolution of the planetary boundary layer over the Amazon rain forest, made at sites close to the confluence of the Solimões and Negro rivers (approximately at 3°S, 60°W) near Manaus, Amazonas, Brazil, show the existence of a diurnal rotation of the wind near the surface and the frequent presence of low-level nocturnal wind maxima. These circulations are shown to be plausibly explained as elements of a river and land breeze circulation induced by the thermal contrast between the rivers and the adjacent forest.