董家山隧道小净距段爆破控制的数值模拟

结合都-汶高速公路董家山隧道小净距段的实际情况,应用数值模拟方法,对小净距段在爆破荷载作用下的相互影响问题进行了研究.结果表明在隧道爆破施工中应对迎爆侧进行重点监控,采用合理的开挖和加固方式将有效降低爆破施工对先建隧道的不利影响.研究结论可为类似小净距段隧道的爆破设计、施工及现场监控量测提供参考.     

金沙江流域(云南境内)山地灾害危险性评价

云南境内的金沙江流域是斜坡不稳定的敏感区,根据1988-2000年的区域调查和统计,区内发育山地灾害点1697处,其中流域面积大于1km2的泥石流沟808条,体积大于1×104m3的滑坡580处,体积大于1000m3的崩塌309处。用于山地灾害危险性评价的主要敏感因子包括岩土体类型、山坡坡度、降雨、土地利用、地震烈度和人类活动。在对这些因子进行了敏感性评价的基础上,应用GIS对敏感因子集成评价而产生了云南金沙江流域山地灾害危险性评价图。评价结果表明:高危险区面积占全区面积6464km2的8 77%,中危险区占全区总面积的41 51%,低危险区占41 12%,无危险区占8 60%。山地灾害危险性评价图可以帮助规划者或工程师在土地发展规划中选择最佳建设场所,以减轻灾害的影响。     

昆明市东川区泥石流信息系统的建立及其应用

根据东川区泥石流的成因、泥石流灾害信息源、各类数据的表达方式及泥石流信息系统的应用等，对东川区泥石流信息系统进行了系统分析，在此基础上利用3S技术，在ARCVIEW的AVENUE开发语言支持下，集成各类数据，建立东川区泥石流信息系统，最后讨论了该系统在泥石流危险度区划及灾害趋势分析中的应用。     

以色列解决水资源短缺对我国西北地区水资源开发的启示

以色列解决水资源问题的经验对新时期中国经济社会可持续发展有着现实的借鉴意义。本文分析了以色列的水资源问题及解决措施，结合我国西北地区的实际情况提出了对西北水资源开发的建议和设想。     

西风带研究动态

本文较为详细地介绍了影响我国气候的重要因子——西风带的一些国内外最新研究动态,这些研究动态和研究成果将对山西省的气候研究起到积极作用。     

陕西省信用联社市县级计算机网络防雷工程设计分析

“山西省卫星农网”依托其省、市、县三级专门服务于农业的信息交流平台,能够及时地让农户了解国家和地方的农业政策及办事程序等,成为农户和政府间的信息桥梁,为广大农村提供准确的各类气象信息,有效地指导了农业生产,大大地减小了天气灾害损失。山西卫星农网作为山西省规模较大的农业专业网站,其影响和作用正逐步地发挥出来。     

Mineralogy and geochemistry of a Late Permian coal in the Dafang Coalfield, Guizhou, China: influence from siliceous and iron-rich calcic hydrothermal fluids

This paper describes the influence of siliceous and iron-rich calcic low-temperature hydrothermal fluids (LTHF) on the mineralogy and geochemistry of the Late Permian No. 11 Coal (anthracitic, R_r=2.85%) in the Dafang Coalfield in northwestern Guizhou Province, China. The No. 11 Coal has high contents of vein ankerite (10.2 vol.%) and vein quartz (11.4 vol.%), with formation temperatures of 85 and 180 °C, respectively, indicating that vein ankerite and vein quartz were derived from low-temperature calcic and siliceous hydrothermal fluids in two epigenetic episodes. The vein quartz appears to have formed earlier than vein ankerite did, and at least three distinct stages of ankerite formation with different Ca/Sr and Fe/Mn ratios were observed.The two types of mineral veins are sources of different suites of major and trace metals. Scanning electron microscope and sequential extraction studies show that, in addition to Fe, Mg, and Ca, vein ankerite is the dominant source of Mn, Cu, Ni, Pb, and Zn in the coal, and the contents of these five elements are as high as 0.09% and 74.0, 33.6, 185, and 289 μg/g, respectively. In contrast, vein quartz is the main carrier mineral for platinum-group elements (PGEs) Pd, Pt, and Ir in the coal, and the contents of Pd, Pt, and Ir are 1.57, 0.15, and 0.007 μg/g, respectively. Sequential extraction showed a high PGE content in the silicate fraction, up to 10.4 μg/g Pd, 1.23 μg/g Pt, and 0.05 μg/g Ir, respectively. It is concluded that the formation of ankerite and quartz and the anomalous enrichment of trace elements in the No. 11 Coal in the Dafang Coalfield, Guizhou, result from the influx of calcic and siliceous low-temperature hydrothermal fluids.     

The influence of coupled physical swelling and chemical reactions on deformable geomaterials

Coupled thermo‐hydro‐mechanical‐chemical modelling has attracted attention in past decades due to many contemporary geotechnical engineering applications (e.g., waste disposal, carbon capture and storage). However, molecular‐scale interactions within geomaterials (e.g., swelling and dissolution/precipitation) have a significant influence on the mechanical behaviour, yet are rarely incorporated into existing Thermal‐Hydro‐Mechanical‐Chemical (THMC) frameworks. This paper presents a new coupled hydro‐mechanical‐chemical constitutive model to bridge molecular‐scale interactions with macro‐physical deformation by combining the swelling and dissolution/precipitation through an extension of the new mixture‐coupling theory. Entropy analysis of the geomaterial system provides dissipation energy, and Helmholtz free energy gives the relationship between solids and fluids. Numerical simulation is used to compare with the selected recognized models, which demonstrates that the swelling and dissolution/precipitation processes may have a significant influence on the mechanical deformation of the geomaterials.