Evidence of an early alteration process driven by magmatic fluid in Mururoa volcano

Evidence for a deuteric alteration process induced by a magmatic fluid has been found in the feeder zone of the Mururoa volcano (French Polynesia). Within the dikes, where basaltic glass does not show any evidence of pervasive alteration, vesicles are filled with dioctahedral smectites and calcite, while olivine phenocrysts are replaced by dioctahedral smectites, ankerite and calcite.The ¹³C signature of carbonates, the carbon and H₂O content of the whole rocks and their impoverishment in deuterium are compatible with the presence of magmatic CO₂ during the crystallization of intruding lavas and exclude contamination by seawater. Mass balance calculations on selected thin sections photographs of partly filled up vesicles and replaced olivine crystals, constrain, assuming a closed system interaction, the chemical composition of the initial fluid and the respective amounts of the initial solid phases involved in the alteration process. Thermodynamic modelings using the EQ3/6 software package correctly predict the mineralogic, chemical and isotopic exchanges accompanying alteration, thus validating the closed system assumption. The model which allows prediction of the influence of CO₂ on the alteration products, shows that, above a 0.25 CO₂ mole fraction in the initial fluid, the alteration is entirely controlled by the chemical composition of the initial solid phases. The presence of CO₂ implies the precipitation of dioctahedral smectites and carbonates instead of the magnesian smectites commonly observed in CO₂-free systems.The Mururoa feeder zone shows alteration features typical of a closed system interaction between the basaltic rock and a magmatic fluid in which seawater did not take part.     

Isotopic and geochemical characterization of salinization in the shallow aquifers of a reclaimed subsiding zone: The southern Venice Lagoon coastland

The coastal plain bordering the southern Venice Lagoon is a reclaimed lowland characterized by high subsidence rate, and ground level and water-table depth below sea level. In this agricultural region, where the surface hydrologic network is entirely artificially controlled by irrigation/drainage canals, salinization problems have long been encountered in soils and groundwaters. Here we use isotopic and geochemical tracers to improve our understanding of the origin of salinization and mineralization of the semi-confined aquifer (0–40 m), and the freshwater inputs to this hydrological system. Water samples have been collected at different seasons in the coastal Adriatic Sea, lagoon, rivers and irrigation canals, as well as in the semi-confined aquifer at depths between 12 and 35 m (14 boreholes), and in the first confined aquifer (three boreholes drilled between 40 and 80 m depth). Stable isotopes (δ¹⁸O and δD) and conductivity profiles show that direct saline intrusion from the sea or the lagoon is observed only in a restricted coastal strip, while brackish groundwaters are found over the entire topographic and piezometric depression in the centre of the study area. Fresh groundwaters are found only in the most western zone. The sharp isotopic contrast between the western and central regions suggests disconnected hydrological circulations between these two parts of the shallow aquifer. The border between these two regions also corresponds to the limits of the most strongly subsiding zone.Our results can be interpreted in terms of a four end-member mixing scheme, involving (1) marine water from the lagoon or the open sea, (2) alpine and pre-alpine regional recharge waters carried either by the main rivers Adige, Bacchiglione and Brenta (irrigation waters) or by the regional groundwater circulation, (3) local precipitation, and (4) evaporated waters infiltrated from the surface. Infiltration from the surface is also revealed by the stratification of the electrical conductivity profiles, showing that the brackish groundwaters are overlain by a shallow layer of less saline water all over the central depression. In the first confined aquifer, the groundwaters have isotopic compositions similar to the deep groundwaters of the Venetian confined aquifers (40–400 m depth). The isotopic data and the Br/Cl ratio show that the origin of the salinization of the phreatic aquifer can be ascribed to seawater intrusion alone, with no indication of the involvement of deep brines (identified at 450 m depth) in the process.The chemical composition of the saline and brackish groundwaters is characterized by an excess of sodium and a deficit of calcium compared to conservative mixing between fresh groundwaters and seawater. This suggests that the phreatic aquifer is progressively freshening, as a consequence of the beneficial influence of the extensive irrigation/drainage network, including raised canals acting as a hydraulic barrier along the coast. This freshening tendency may have been lasting since the reclamation in the mid-twentieth century, and has probably been accelerated by the ban on groundwater abstraction since the 1970s.     

Slowness-backazimuth weighted migration: A new array approach to a high-resolution image

We have developed a new array method combining conventional migration with a slowness-backazimuth deviation weighting scheme. All seismic traces are shifted based on the theoretical traveltime of the scattered wave from specific gridpoints in a 3-D volume. Observed slowness and backazimuth are calculated for each raypath and compared with theoretical values in order to estimate slowness and backazimuth deviations. Subsequently, stacked energy calculated by a conventional migration method is weighted by the slowness and backazimuth deviations to suppress any arrival energy whose slowness and backazimuth are inconsistent with the expected theoretical values. This new method was applied to two P- wave data sets which comprise (1) underside reflections at the 410 and 660 km mantle discontinuities and (2) D" reflections as well as their corresponding synthetic data sets. The results show that the weighting scheme dramatically increases the resolution of the migrated images and enables us to obtain well-constrained, focused images, making upper-mantle discontinuities and D" reflections more distinct by reducing their surrounding energy.     

Comparison of ladderane phospholipid and core lipids as indicators for anaerobic ammonium oxidation (anammox) in marine sediments

We investigated anaerobic ammonium oxidation (anammox) in continental shelf and slope sediments of the Irish and Celtic Seas by using anammox specific ladderane biomarker lipids. We used the presence of an intact ladderane phospholipid as a direct indicator for living anammox bacteria, and compared it with the abundance of ladderane core lipids derived from both living and dead bacterial biomass. All investigated sediments contained ladderane core lipids as well as the intact ladderane phospholipid, in agreement with ¹⁵N-labeling experiments, which revealed anammox activity at all sites. Ladderane core lipid and intact ladderane phospholipid concentrations were significantly correlated (R² = 0.957 and 0.464, respectively) with anammox activity over the transect of the continental shelf and slope sediments. In the Irish Sea (50-100 m water depth) highest abundances of the intact ladderane phospholipid were found in the upper 2 cm of the sediment, indicating a zone of active anammox. A sharp decline further down-core suggested a strong decrease in anammox biomass and rapid degradation of the intact lipids. In comparison, ladderane core lipids were 1-2 orders of magnitude higher in concentration than the intact ladderane phospholipid and accumulated as dead cell remnants with depth. In the slope sediments of the Celtic Sea both ladderane core lipids and the intact ladderane phospholipid were found in sediments at water depths ranging from 500 to 2000 m. Here, anammox seemed to be active at greater depths of the sediment (>2 cm). Mean abundances of both intact and core ladderane lipids in whole sediment cores increased downslope, indicating an increasing importance of anammox in deeper slope sediments.     

A late Holocene paleoclimatic history of Lake Tanganyika, East Africa

A nearshore core (LT03-05) from the north basin of Lake Tanganyika provides diatom, pollen, and sedimentary time series covering the last ca. 3800 yr at 15-36 yr resolution. A chronology supported by 21 AMS dates on terrestrial and lacustrine materials allows us to account for ancient carbon effects on ¹⁴C ages and to propose refinements of the region's climatic history. Conditions drier than those of today were followed after ca. 3.30 ka by an overall wetting trend. Several century-scale climate variations were superimposed upon that trend, with exceptionally rainy conditions occurring 1.70-1.40 ka, 1.15-0.90 ka, 0.70-0.55 ka, and 0.35-0.20 ka. Around 0.55-0.35 ka, during the Spörer sunspot minimum, drier conditions developed in the northern Tanganyika basin while more humid conditions were registered at Lakes Victoria and Naivasha. This indicates significant variability in the nature and distribution of near-equatorial rainfall anomalies during much of the Little Ice Age.     

Presolar silicate and oxide abundances and compositions in the ungrouped carbonaceous chondrite Adelaide and the K chondrite Kakangari: The effects of secondary processing

Abstract– Although it has been suggested that the ungrouped carbonaceous chondrite Adelaide and the K chondrite Kakangari could be considered highly primitive, our study of their presolar grain abundances shows that both have experienced more secondary processing than other primitive chondrites with high presolar grain abundances. Presolar grains are rare in Kakangari and are present in reduced abundances in Adelaide (approximately 70 ppm for O‐anomalous grains). Thermal annealing has led to widespread crystallization of their fine‐grained matrices, and accounts for the partial to complete destruction of presolar grains. In addition, presolar silicates in Adelaide show elevated Fe abundances and Fe‐rich rims indicative of infiltration of Fe into the grains from the surrounding matrix. This process probably also took place during annealing, most likely in the solar nebula, in a region with an enhanced dust‐to‐gas ratio. The most primitive meteorites, with the highest presolar grain abundances, appear to be those whose matrices contain abundant amorphous material that has escaped any significant thermal or aqueous alteration.     

Northwest Africa 773: lunar mare breccia with a shallow-formed olivine-cumulate component, inferred very-low-Ti (VLT) heritage, and a KREEP connection

Lunar meteorite Northwest Africa 773 (herein referred to as NWA773) is a breccia composed predominantly of mafic volcanic components, including a prominent igneous clast lithology. The clast lithology is an olivine-gabbro cumulate, which, on the basis of mineral and bulk compositions, is a hypabyssal igneous rock related compositionally to volcanic components in the meteorite. The olivine-gabbro lithology exhibits cumulus textures and, in our largest section of it, includes some 48% olivine (Fo₆₄ to Fo₇₀, average Fo₆₇), 27% pigeonite (En₆₀Fs₂₄Wo₁₆ to En₆₇Fs₂₇Wo₆), 11% augite (En₅₀Fs₁₇Wo₃₃ to En₄₇Fs₁₃Wo₄₀), 2% orthopyroxene (En₇₀Fs₂₆Wo₄), 11% plagioclase (An₈₀ to An₉₄), and trace barian K-feldspar, ilmenite, Cr-spinel, RE-merrillite, troilite, and Fe-Ni metal. The Mg/Fe ratios of the mafic silicates indicate equilibration of Fe and Mg; however, the silicates retain compositional variations in minor and trace elements that are consistent with intercumulus crystallization. Accessory mineralogy reflects crystallization of late-stage residual melt. Both lithologies (breccia and olivine cumulate) of the meteorite have very-low-Ti (VLT) major-element compositions, but with an unusual trace-element signature compared to most lunar VLT volcanic compositions, i.e., relative enrichment in light REE and large-ion-lithophile elements, and greater depletion in Eu than almost all other known lunar volcanic rocks. The calculated composition of the melt that was in equilibrium with pyroxene and plagioclase of the cumulate lithology exhibits a KREEP-like REE pattern, but at lower concentrations. Melt of a composition calculated to have been in equilibrium with the cumulate assemblage, plus excess olivine, yields a major-element composition that is similar to known green volcanic glasses. One volcanic glass type from Apollo 14 in particular, green glass B, type 1, has a very low Ti concentration and REE characteristics, including extremely low Eu concentration, that make it a candidate parent melt for the olivine-gabbro cumulate. We infer an origin for the parent melt of NWA773 volcanic components by assimilation of a trace-element-rich partial or residual melt by a magnesian, VLT magma deep in the lunar crust or in the mantle prior to transportation to the near-surface, accumulation of olivine and pyroxene in a shallow chamber, eruption onto a volcanic surface, and incorporation of components into local, predominantly volcanic regolith, prior to impact mixing of the volcanic terrain and related hypabyssal setting, and ejection from the surface of the Moon. Volcanic components such as these probably occur in the Oceanus Procellarum region near the site of origin of the green volcanic glasses found in the Apollo 14 regolith.     

Role of the Kazerun fault system in active deformation of the Zagros fold-and-thrust belt (Iran)

Field structural and SPOT image analyses document the kinematic framework enhancing transfer of strike-slip partitioned motion from along the backstop to the interior of the Zagros fold-and-thrust belt in a context of plate convergence slight obliquity. Transfer occurs by slip on the north-trending right-lateral Kazerun Fault System (KFS) that connects to the Main Recent Fault, a major northwest-trending dextral fault partitioning oblique convergence at the rear of the belt. The KFS formed by three fault zones ended by bent orogen-parallel thrusts allows slip from along the Main Recent Fault to become distributed by transfer to longitudinal thrusts and folds. To cite this article: C. Authemayou et al., C. R. Geoscience 337 (2005).     

Analysis of the Devonian (Frasnian) platform from Belgium: a multi‐faceted approach for basin evolution reconstruction

This study undertakes a multi‐disciplinary approach (sedimentology, carbon isotopes, magnetic susceptibility and thickness distribution) to improve understanding of a major Palaeozoic carbonate platform, the Frasnian platform of Belgium. These combined techniques are used to reconstruct the platform history, which evolved in two main steps. During the first phase, the basin was strongly influenced by faulting, producing notable thickness and facies variations, with open ocean conditions, with good water circulation and no/or limited barrier reef. The second phase of platform development was less influenced by differential subsidence, as indicated by homogeneous facies distribution. However, this platform developed under restricted waters, with low circulation which is likely related to the development of a barrier reef.