Study of the air-sea interactions at the mesoscale: the SEMAPHORE experiment

The SEMAPHORE (Structure des Echanges Mer-Atmosphère, Propriétés des Hétérogénéités Océaniques: Recherche Expérimentale) experiment has been conducted from June to November 1993 in the Northeast Atlantic between the Azores and Madeira. It was centered on the study of the mesoscale ocean circulation and air-sea interactions. The experimental investigation was achieved at the mesoscale using moorings, floats, and ship hydrological survey, and at a smaller scale by one dedicated ship, two instrumented aircraft, and surface drifting buoys, for one and a half month in October-November (IOP: intense observing period). Observations from meteorological operational satellites as well as spaceborne microwave sensors were used in complement. The main studies undertaken concern the mesoscale ocean, the upper ocean, the atmospheric boundary layer, and the sea surface, and first results are presented for the various topics. From data analysis and model simulations, the main characteristics of the ocean circulation were deduced, showing the close relationship between the Azores front meander and the occurrence of Mediterranean water lenses (meddies), and the shift between the Azores current frontal signature at the surface and within the thermocline. Using drifting buoys and ship data in the upper ocean, the gap between the scales of the atmospheric forcing and the oceanic variability was made evident. A 2 °C decrease and a 40-m deepening of the mixed layer were measured within the IOP, associated with a heating loss of about 100 W m⁻². This evolution was shown to be strongly connected to the occurrence of storms at the beginning and the end of October. Above the surface, turbulent measurements from ship and aircraft were analyzed across the surface thermal front, showing a 30% difference in heat fluxes between both sides during a 4-day period, and the respective contributions of the wind and the surface temperature were evaluated. The classical momentum flux bulk parameterization was found to fail in low wind and unstable conditions. Finally, the sea surface was investigated using airborne and satellite radars and wave buoys. A wave model, operationally used, was found to get better results compared with radar and wave-buoy measurements, when initialized using an improved wind field, obtained by assimilating satellite and buoy wind data in a meteorological model. A detailed analysis of a 2-day period showed that the swell component, propagating from a far source area, is underestimated in the wave model. A data base has been created, containing all experimental measurements. It will allow us to pursue the interpretation of observations and to test model simulations in the ocean, at the surface and in the atmospheric boundary layer, and to investigate the ocean-atmosphere coupling at the local and mesoscales.     

From outwash to coastal systems in the Portneuf–Forestville deltaic complex (Québec North Shore): Anatomy of a forced regressive deglacial sequence

Deglacial sequences typically include backstepping grounding zone wedges and prevailing glaciomarine depositional facies. However, in coastal domains, deglacial sequences are dominated by depositional systems ranging from turbiditic to fluvial facies. Such deglacial sequences are strongly impacted by glacio‐isostatic rebound, the rate and amplitude of which commonly outpaces those of post‐glacial eustatic sea‐level rise. This results in a sustained relative sea‐level fall covering the entire depositional time interval. This paper examines a Late Quaternary, forced regressive, deglacial sequence located on the North Shore of the St. Lawrence Estuary (Portneuf Peninsula, Québec, Canada) and aims to decipher the main controls that governed its stratigraphic architecture. The forced regressive deglacial sequence forms a thick (>100 m) and extensive (>100 km²) multiphased deltaic complex emplaced after the retreat of the Laurentide Ice Sheet margin from the study area ca 12 500 years ago. The sedimentary succession is composed of ice‐contact, glaciomarine, turbiditic, deltaic, fluvial and coastal depositional units. A four‐stage development is recognized: (i) an early ice‐contact stage (esker, glaciomarine mud and outwash fan); (ii) an in‐valley progradational stage (fjord head or moraine‐dammed lacustrine deltas) fed by glacigenics; (iii) an open‐coast deltaic progradation, when proglacial depositional systems expanded beyond the valley outlets and merged together; and (iv) a final stage of river entrenchment and shallow marine reworking that affected the previously emplaced deltaic complex. Most of the sedimentary volume (10 to 15 km³) was emplaced during the three‐first stages over a ca 2 kyr interval. In spite of sustained high rates of relative sea‐level fall (50 to 30 mm·year^?1), delta plain accretion occurred up to the end of the proglacial open‐coast progradational stage. River entrenchment only occurred later, after a significant decrease in the relative sea‐level fall rates (<30 mm·year^?1), and was concurrent with the formation and preservation of extensive coastal deposits (raised beaches, spit platform and barrier sands). The turnaround from delta plain accretion to river entrenchment and coastal erosion is interpreted to be a consequence of the retreat of the ice margin from the river drainage basins that led to the drastic drop of sediment supply and the abrupt decrease in progradation rates. The main internal stratigraphic discontinuity within the forced regressive deglacial sequence does not reflect changes in relative sea‐level variations.     

Geological,geophysical and geochemical structure of a fault zone developed in granitic rocks: Implications for fault zone modeling in 3-D

The structure of a fault zone developed in granitic rocks can be established on the basis of the spatial variability of geological, geophysical and geochemical parameters. In the North Fault of the Mina Ratones area (SW Iberian Massif, Spain), fault rocks along two studied traverses (SR-2 and SR-3 boreholes) exhibit systematic changes in mineralogy, geochemistry, fabrics and microstructures that are related to brittle deformation and alteration of granite to form cataclasite and subsequent gouge. The spatial distribution and intensity of these changes suggest a North Fault morphology that is consistent with the fault-core/damage-zone model proposed by Chester et al. (1993) to describe a fault zone architecture. North Fault damage zone thickness can be defined by the development of mechanically related mesoscopic faults and joints, that produce a Fracture Index (FI)>10. High FI values are spatially correlated with relative low seismic velocity zones (V_P<5 km/s and V_S<2.5 km/s in the well-logs), more probably related to a high concentration of fractures and geochemical alteration produced by meteoric water-granite interaction along fault surfaces. This correlation is the base of a geostatistical model proposed in the final part of this study to image the fault zone architecture of a granitic massif.     

Sites occupancy of Fe3+ in Garfield Nontronite: A spectroscopic study

New data on the structure of Garfield nontronite have been produced by the use of different spectroscopic techniques: Mössbauer spectroscopy, optical spectroscopy, X-ray absorption edges and EXAFS and NMR. The tetrahedral iron content is found to be no higher than 1 percent. All iron atoms belong to the octahedral sheet excluding the possibility of the presence of non crystallized phases. Some ambiguities remain about the coherence of the octahedral sheet because of the presence of two doublets in the Mössbauer spectrum and at least two lineshapes in NMR spectra of OH which correspond to different environments.     

Isotropic and anisotropic pointing models

This paper describes an alternative approach for generating pointing models for telescopes equipped with serial kinematics, esp. equatorial or alt-az mounts. Our model construction does not exploit any assumption for the underlying physical constraints of the mount, however, one can assign various effects to the respective components of the equations. In order to recover the pointing model parameters, classical linear least squares fitting procedures can be applied. This parameterization also lacks any kind of parametric singularity. We demonstrate the efficiency of this type of model on real measurements with meter-class telescopes where the results provide a root mean square accuracy of 1.5?2 arcseconds.     

Data assimilation with the ensemble Kalman filter in a numerical model of the North Sea

Coastal management and maritime safety strongly rely on accurate representations of the sea state. Both dynamical models and observations provide abundant pieces of information. However, none of them provides the complete picture. The assimilation of observations into models is one way to improve our knowledge of the ocean state. Its application in coastal models remains challenging because of the wide range of temporal and spatial variabilities of the processes involved. This study investigates the assimilation of temperature profiles with the ensemble Kalman filter in 3-D North Sea simulations. The model error is represented by the standard deviation of an ensemble of model states. Parameters’ values for the ensemble generation are first computed from the misfit between the data and the model results without assimilation. Then, two square root algorithms are applied to assimilate the data. The impact of data assimilation on the simulated temperature is assessed. Results show that the ensemble Kalman filter is adequate for improving temperature forecasts in coastal areas, under adequate model error specification.     

Evaluation of recent hydro-climatic changes in four tributaries of the Niger River Basin (West Africa)

West Africa experienced severe drought during the 1970s and 1980s, posing a threat to water resources. A wetter climate more recently suggests recovery from the drought. The Mann-Kendall trend and Theil-Sen’s slope estimator were applied to detect probable trends in weather elements in four sub-basins of the Niger River Basin between 1970 and 2010. The cross-entropy method was used to detect breakpoints in rainfall and runoff, Spearman’s rank test for correlation between the two, and cross-correlation analysis for possible lags. Results showed an overall increase in rainfall and runoff and a decrease in sunshine duration. Spearman’s coefficients suggest significant (5%) moderate to strong rainfall–runoff correlation for three sub-basins. A significant lower runoff was observed around 1979, with a rainfall break around 1992, indicating possible cessation of the drought. Temperatures increased significantly, at 0.02–0.05°C year^-1, with a negative wind speed trend for most stations. Half of the stations exhibited an increase in potential evapotranspiration.

EDITOR M.C. Acreman

ASSOCIATE EDITOR Not assigned     

Accuracy assessment of the Mexican National Forest Inventory map: A study in four ecogeographical areas

The accuracy of the Mexican National Forest Inventory (NFI) map is derived in four distinct ecogeographical areas, using an assessment design tailored for the project. A main achievement of the design was to integrate the high diversity of classes encompassed at the most detailed subcommunity level of the classification scheme within a cost‐controlled statistically sound assessment. A hybrid double sampling strategy was applied to the 2.5 million‐ha study area. A total of 5955 reference sites were verified against their NFI map label. The availability of detailed quasi‐synchronous reference data for the 2000 Landsat‐derived NFI and the high diversity of mapped classes allowed a careful thematic analysis on the selected regions, relevant for national extrapolation. Global accuracy estimates of 64–78 per cent were registered among the four ecogeographical areas (two with mainly temperate climate and the other two with mainly tropical climate), with the lower accuracy levels found in areas more densely covered with forests. According to the estimates, the NFI map tends to underestimate the presence of temperate forest (especially oak) and overestimate the presence of tropical forest in the areas investigated. The analysis of confusions reveals difficulties in unambiguously interpreting or labelling forests with secondary vegetation, herbaceous and/or shrub‐like vegetation as well as distinguishing between aquatic vegetation types. The design proved useful from the perspective of accuracy assessments of regional maps in biodiverse regions.     

Analysis of the Devonian (Frasnian) platform from Belgium: a multi‐faceted approach for basin evolution reconstruction

This study undertakes a multi‐disciplinary approach (sedimentology, carbon isotopes, magnetic susceptibility and thickness distribution) to improve understanding of a major Palaeozoic carbonate platform, the Frasnian platform of Belgium. These combined techniques are used to reconstruct the platform history, which evolved in two main steps. During the first phase, the basin was strongly influenced by faulting, producing notable thickness and facies variations, with open ocean conditions, with good water circulation and no/or limited barrier reef. The second phase of platform development was less influenced by differential subsidence, as indicated by homogeneous facies distribution. However, this platform developed under restricted waters, with low circulation which is likely related to the development of a barrier reef.