Reynolds stress and TKE production in an estuary with a tidal bore

We report new measurements of the turbulent properties of the flow in a tidally energetic estuarine channel of almost uniform cross-section. A high-frequency (1.2 MHz), bottom-mounted Acoustic Doppler Current Profiler (ADCP) has been used to observe the velocity field at a sampling rate of 10 Hz in parallel with measurements of the surface elevation by tide gauges. Our data have been analysed using the Variance Method to determine turbulent kinetic energy (TKE), shear stress and TKE production over the tidal cycle with a time resolution of 60 s. During the highly energetic but brief flood period, when the surface axial velocity reaches 2 m s⁻¹, we observed large values of stress (>2 Pa) and shear production (5 W m⁻³). TKE is also input through the release of energy in the bore itself which results in a brief but intense injection of energy at the bore front with large transient TKE levels (100 J m⁻³). Subsequent input by shear production maintains TKE levels which are generally lower (20 J m⁻³) than the strong peak associated with the bore for the rest of the flood. On the ebb, the flow is relatively tranquil with maximum speeds 0.5 m s⁻¹ and peak TKE production rates of 0.1 W m⁻³.The flow and elevation data have also been used to estimate the energy fluxes into and out of the estuary. Short (1 h), intense energy inputs (8 MW at springs) on the flood flow are largely balanced by longer, less intense seaward energy flow on the ebb. The net energy input is found to be 0.1 MW at springs which is consistent with estimates of upstream dissipation. Peak dissipation in the bore itself may exceed the mean energy input but it is active only for a small fraction of the tidal cycle and its average contribution does not exceed 12% of total dissipation.     

Preliminary assessment of the ATHENA/WFI non-X-ray background

We present a preliminary assessment of the non-X-ray background for the WFI on board ATHENA conducted at IAAT in the context of the collaborative background and radiation damage working group activities. Our main result is that in the baseline configuration originally assumed for the camera the requirement on the level of non-X-ray background could not be met. In light of the results of Geant4 simulations we propose and discuss a possible optimization of the camera design and pinpoint some open issues to be addressed in the next phase of investigation. One of these concerns the possible contribution to the non-X-ray background from soft protons and ions funneled to the focal plane through the optics. This is not quantified at this stage, here we just briefly report on our ongoing activities aimed at validating the mechanisms of proton scattering at grazing incidence.     

Variation in Coronal Activity from Solar Cycle 24 Minimum to Maximum Using Three-Dimensional Reconstructions of the Coronal Electron Density from STEREO/COR1

Three-dimensional electron density distributions in the solar corona are reconstructed for 100 Carrington rotations (CR 2054?–?2153) during 2007/03?–?2014/08 using the spherically symmetric method from polarized white-light observations with the inner coronagraph (COR1) onboard the twin Solar Terrestrial Relations Observatory (STEREO). These three-dimensional electron density distributions are validated by comparison with similar density models derived using other methods such as tomography and a magnetohydrodynamics (MHD) model as well as using data from the Solar and Heliospheric Observatory (SOHO)/Large Angle and Spectrometric Coronagraph (LASCO)-C2. Uncertainties in the estimated total mass of the global corona are analyzed based on differences between the density distributions for COR1-A and -B. Long-term variations of coronal activity in terms of the global and hemispheric average electron densities (equivalent to the total coronal mass) reveal a hemispheric asymmetry during the rising phase of Solar Cycle 24, with the northern hemisphere leading the southern hemisphere by a phase shift of 7?–?9 months. Using 14 CR (\(\approx13\)-month) running averages, the amplitudes of the variation in average electron density between Cycle 24 maximum and Cycle 23/24 minimum (called the modulation factors) are found to be in the range of 1.6?–?4.3. These modulation factors are latitudinally dependent, being largest in polar regions and smallest in the equatorial region. These modulation factors also show a hemispheric asymmetry: they are somewhat larger in the southern hemisphere. The wavelet analysis shows that the short-term quasi-periodic oscillations during the rising and maximum phases of Cycle 24 have a dominant period of 7?–?8 months. In addition, it is found that the radial distribution of the mean electron density for streamers at Cycle 24 maximum is only slightly larger (by \(\approx30\%\)) than at cycle minimum.     

The Eltanin asteroid impact: possible South Pacific palaeomegatsunami footprint and potential implications for the Pliocene–Pleistocene transition

Large asteroid impacts are rare, and those into the deep ocean are rarer still. The Eltanin asteroid impact around 2.51 ± 0.07 Ma occurred at a time of great climatic and geological change associated with the Pliocene–Pleistocene boundary. Numerical models of the event indicate that a megatsunami was generated, although there is debate concerning its magnitude and the region‐wide extent of its influence. We summarise the existing evidence for possible Eltanin megatsunami deposits in Antarctica, Chile and New Zealand, while also examining other potential sites from several locations, mainly around the South Pacific region. In reviewing these data we note that these events were unfolding at the same time as those associated with the Pliocene–Pleistocene boundary and, as such, most of the geological evidence from that time has a climatic interpretation. The potential climatic and geological ramifications of the Eltanin asteroid impact, however, have failed to be considered by most researchers studying this time period. Although we are not advocating that all geological activity at that time is connected with the Eltanin asteroid impact, it raises interesting questions about the role potentially played by such catastrophic events in contributing to or even triggering epochal transitions. Copyright © 2012 John Wiley & Sons, Ltd.     

Geophysical surveys of the sediments of Loch Ness,Scotland: implications for the deglaciation of the Moray Firth Ice Stream,British–Irish Ice Sheet

We present results from three geophysical campaigns using high‐resolution sub‐bottom profiling to image sediments deposited in Loch Ness, Scotland. Sonar profiles show distinct packages of sediment, providing insight into the loch's deglacial history. A recessional moraine complex in the north of the loch indicates initial punctuated retreat. Subsequent retreat was rapid before stabilisation at Foyers Rise formed a large stillstand moraine. Here, the calving margin produced significant volumes of laminated sediments in a proglacial fjord‐like environment. Subsequent to this, ice retreated rapidly to the southern end of the loch, where it again deposited a sequence of proglacial laminated sediments. Sediment sequences were then disturbed by the deposition of a thick gravel layer and a large turbidite deposit as a result of a jökulhlaup from the Spean/Roy ice‐dammed lake. These sediments are overlain by a Holocene sheet drape. Data indicate: (i) a former tributary of the Moray Firth Ice Stream migrated back into Loch Ness as a major outlet glacier with a calving margin in a fjord‐like setting; (ii) there was significant sediment supply to the terminus of this outlet glacier in Loch Ness; and (iii) that jökulhlaups are important for sediment supply into proglacial fjord/lake environments and may compose >20% of proglacial sedimentary sequences. Copyright © 2011 John Wiley & Sons, Ltd.     

Dynamic recrystallization and chemical evolution of clinoamphibole from Senja,Norway

Clinoamphibole from a mylonitic amphibolite exhibits microstructures characteristic of dynamic recrystallization, including porphyroclasts in a finer grained matrix of needle-shaped amphibole. The matrix amphibole defines an LS fabric and porphyroclasts have core and mantle structures with a core containing undulose to patchy extinction and (100) deformation twinning surrounded by a mantle of recrystallized grains. In addition intragranular grains also occur within the cores. TEM analyses of the porphyroclasts reveal that they contain a wide variety of lattice defects including high densities (5 × 10⁸cm^–2) of free dislocations and dislocation arrays, dissociated dislocations, stacking faults, and (100) micro-twins. TEM also shows that matrix grains and intragranular grains have relatively low defect densities, and that the intragranular new grains occur at localities in the porphyroclasts characterized by high densities of dislocations. These observations along with the chemical and orientation relationships between the recrystallized grains and porphyroclasts indicate that the new grains may have formed by heterogeneous nucleation and that further growth probably occurred by both strain assisted and chemically induced grain boundary migration or liquid film migration. This recrystallization event is interpreted to be synkinematic based on the fact that no recrystallization textures are present in the matrix grains and that the matrix grains define an LS fabric. However, the low defect densities in the matrix grains and the lack of intracrystalline strain in other phases indicate that post-kinematic recovery processes were active.     

Digital data acquisition and analysis: An introduction

There is no doubt that although the price of PCs has fallen, the performance for money continues to rise. As this happens, so the suitability of using general-purpose computing platforms, especially PCs, for specific technical applications increases. This article discusses recent developments and reviews some of the systems which are currently available for data acquisition and analysis in the environmental sciences.     

The Indus-Tsangpo suture zone in Ladakh, northwest Himalaya: Further palaeomagnetic data and implications

A total of 81 samples (244 specimens) from Upper Cretaceous Indus Molasse and Middle to Upper Cretaceous Dras Flyschoids of the Indus-Tsangpo suture zone in Ladakh (northwest Himalaya) has been studied by thermal demagnetization methods.Both formations showed a characteristic magnetization component indicative for equatorial to low northern palaeolatitudes of acquisition. Similar palaeolatitudes have been obtained before from secondary magnetization components of Early Tertiary age in the Ladakh Intrusives and in the Tibetan Sedimentary Series of central Nepal. The present characteristic components are interpreted likewise as secondary magnetizations which stabilized between 50 and 60 m.y. ago, during Greater India's collision with Asia's southern margin.The Dras Flyschoids show another magnetic component which, in case of primary origin, indicates acquisition at a low southern palaeolatitude. If correct, this interpretation supports recent suggestions for Late Cretaceous obduction of an island arc on Greater India's northern margin.