A rooftop tuned mass damper frame

This article documents the analytical study and feasibility of placing a tuned mass damper in the form of a limber rooftop moment frame atop relatively stiff structures to reduce seismic acceleration response. Six existing structures were analytically studied using a suite of time history and response spectra records. The analyses indicate that adding mass in conjunction with a limber frame results in an increase in the fundamental period of each structure. The fundamental period increase generally results in a decrease in seismic acceleration response for the same time history and response spectra records. Owing to the limber nature of the rooftop frames, non‐linear analysis methods were required to evaluate the stability of the rooftop tuned mass damper frame. The results indicate the addition of a rooftop tuned mass damper frame reduces the seismic acceleration response for most cases although acceleration response can increase if the rooftop frame is not tuned to accommodate the specific structure's dynamic behaviour and localized soil conditions. Appropriate design of the rooftop tuned mass damper frame can result in decreased seismic acceleration response. This translates to safer structures if used as a retrofit measure or a more economical design if used for new construction. Copyright © 2003 John Wiley & Sons, Ltd.     

Water and sediment outbursts from advanced Franz Josef Glacier,New Zealand

The Franz Josef Glacier, Westland, New Zealand, has a history of catastrophic sediment‐laden outburst ?oods associated with extreme rainfall events when the glacier toe is advanced over its own sediments. Consideration of these events and inspection of recent sediment deposits suggest that there are three distinct modes of outburst. The ?rst is associated with fans fed by over?ow along the glacier margin. As the glacier has advanced across its own fore?eld gravels, it is inferred that the primary drainage conduit has developed a reach of negative slope. In high ?ows massive boulders can block the conduit, trapping lesser clasts. The resulting backup of water causes over?ows through marginal moulins, producing the fan type of deposit. The second type of outburst deposits massive imbricated boulders at a greater or lesser distance from the glacier portal. In this case, pressure buildup drives the blockage out of the portal where the boulders deposit. Smaller materials are generally carried away. The third type consists of very shallow ?ows, and produces massive gravel deposits of uncertain provenance. In this condition, the excess pressure in the conduit results in slight uplift of the glacier and widespread discharge of water and sediment below the glacier snout; gravels and smaller sediments are laid down in a massive deposit across the fore?eld. The massive, boulder‐veneered deposit from the December 1995 outburst is interpreted in the light of the above mechanisms as a hyperconcentrated ?ow deposit from hydraulic jacking, overlain by boulders emplaced by a subsequent conduit outburst. A possible association of outbursts with the present advanced position of the glacier is suggested. Copyright © 2003 John Wiley & Sons, Ltd.     

Classification of artificial (man-made) ground

The legacy inherited from anthropogenic processes needs to be addressed in order to provide reliable and up-to-date ground information relevant to development and regeneration in the urban environment. The legacy includes voids as well as anthropogenic deposits (artificial ground). Their characteristics derive from former quarrying and mining activities industrial processes creating derelict ground, variably consolidated made ground, and contaminated groundwater and soils. All need to be systematically assessed to inform the planning process and provide the basis for engineering solutions. Site-specific investigation needs to be conducted on the back of good quality geoscientific data. This comes from ‘field’ survey, remotely sensed data interpretation, historical maps, soil geochemical sampling, and geotechnical investigation. Three-dimensional and, in the future, four dimensional, characterization of superficial deposits is required to reach an understanding of the potential spatial lithological variability of artificial ground and the geometry of important surfaces, i.e. the boundary conditions. The classification scheme for artificial ground outlined in this paper and adopted by the British Geological Survey, will help in achieving this understanding.     

Changes in physical and chemical properties of three soil types in India as a result of amendment with fly ash and sewage sludge

The use of coal fly ash and domestic sewage sludge in agriculture is being considered as one of the methods for recycling of these wastes in an environmental beneficial manner. Mixtures with soil were prepared at different proportions of fly ash and sludge, either alone or in combination at a maximum application rate of 52 t ha^-1. The changes in the selected properties and heavy metal contents of three soil types in India were studied after incubating the respective mixtures for 90 days at near field capacity moisture level. Sewage sludge, due to its acidic and saline nature, high organic matter and heavy metals content, had more impact on soil properties than the fly ash. Sludge application produced several changes including an increase in available nitrogen, organic carbon, salinity and water-holding capacity of the soils. The concentrations of major cations and heavy metals also increased because of the sludge application and the pH was decreased. However, the levels of individual metal concentrations in all the mixture types were below the allowable limits prescribed by several environmental agencies. Using fly ash either alone or in equal quantity with sewage sludge had little influence on soil properties and heavy metal content. The relative availability (RA) of heavy metals in three soils amended with 52 t ha^-1 of sewage sludge was observed to be highest in oxisol, followed by alfisol and vertisol.     

Stochastic Structural Modeling

A consistent stochastic model for faults and horizons is described. The faults are represented as a parametric invertible deformation operator. The faults may truncate each other. The horizons are modeled as correlated Gaussian fields and are represented in a grid. Petrophysical variables may be modeled in a reservoir before faulting in order to describe the juxtaposition effect of the faulting. It is possible to condition the realization on petrophysics, horizons, and fault plane observations in wells in addition to seismic data. The transmissibility in the fault plane may also be included in the model. Four different methods to integrate the fault and horizon models in a common model is described. The method is illustrated on an example from a real petroleum field with 18 interpreted faults that are handled stochastically.     

A mineral equilibria study of the hydrothermal alteration in mafic greenschist facies rocks at Kalgoorlie, Western Australia

The influx of a H₂O–CO₂‐dominated fluid into actinolite‐bearing metabasic rocks during greenschist facies metamorphism in the Kalgoorlie area of Western Australia resulted in a zoned alteration halo around inferred fluid conduits that contain gold mineralisation. The alteration halo is divided into two outer zones, the chlorite zone and the carbonate zone, and an inner pyrite zone adjacent to the inferred fluid conduits. Reaction between the fluid and the protolith resulted in the breakdown of actinolite and the development of chlorite, dolomite, calcite and siderite. In addition, rocks in the pyrite zone developed muscovite‐bearing assemblages as a consequence of the introduction of potassium by the fluid. Mineral equilibria calculations undertaken using the computer software thermocalc in the model system Na₂O–CaO–K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O–CO₂ show that mineral assemblages in the outer zones of the alteration halo are consistent with equilibrium of the protoliths with a fluid of composition X_CO2 = CO₂/(CO₂ + H₂O) = 0.1–0.25 for temperatures of 315–320 °C. The inner zone of the alteration halo reflect equilibrium with a fluid of composition X_CO2≈ 0.25. Fluid‐rock buffering calculations show that the alteration halo is consistent with interaction with a single fluid composition and that the zoned structure of the halo reflects the volume of this fluid with which the rocks reacted. This fluid is likely to have also been the one responsible for the gold mineralisation at Kalgoorlie.     

Paleozoic terranes of eastern Australia and the drift history of Gondwana

Critical assessment of Paleozoic paleomagnetic results from Australia shows that paleopoles from locations on the main craton and in the various terranes of the Tasman Fold Belt of eastern Australia follow the same path since 400 Ma for the Lachlan and Thomson superterranes, but not until 250 Ma or younger for the New England superterrane. Most of the paleopoles from the Tasman Fold Belt are derived from the Lolworth-Ravenswood terrane of the Thomson superterrane and the Molong-Monaro terrane of the Lachlan superterrane. Consideration of the paleomagnetic data and geological constraints suggests that these terranes were amalgamated with cratonic Australia by the late Early Devonian. The Lolworth-Ravenswood terrane is interpreted to have undergone a 90° clockwise rotation between 425 and 380 Ma. Although the Tamworth terrane of the western New England superterrane is thought to have amalgamated with the Lachlan superterrane by the Late Carboniferous, geological syntheses suggest that movements between these regions may have persisted until the Middle Triassic. This view is supported by the available paleomagnetic data. With these constraints, an apparent polar wander path for Gondwana during the Paleozoic has been constructed after review of the Gondwana paleomagnetic data. The drift history of Gondwana with respect to Laurentia and Baltica during the Paleozoic is shown in a series of paleogeographic maps.     

Papua New Guinea Highlands: palaeomagnetic constraints on terrane tectonics

Oblique convergence since the Early Cenozoic between the northward-moving Australian plate, westward-moving Pacific plate and almost stationary Eurasian plate has created a world-ranking tectonic zone in the eastern Indonesia–New Guinea–Southwest Pacific region (Tonga–Sulawesi megashear) that is notorious for its complex mix of tectonic styles and terrane juxtapositions. Unlike an ancient analog—the Mesozoic–Cenozoic Cordillera of North America—palaeomagnetic constraints on terrane motions in the zone are few. To improve the framework of quantitative control on such motions and therefore our understanding of the development of the zone, results of a palaeomagnetic study in the Highlands region of Papua New Guinea (PNG), in the southern part of the New Guinea Orogen, are reported. The study yields new insights into terrane tectonics along the Australian craton's active northern margin and confirms the complexity of block rotations to be expected at the local scale in tectonically intricate zones. The study is based on more than 500 samples (21 localities) collected from an interior and an exterior zone of New Guinea's central cordillera. The two zones are separated by the Tahin and Stolle–Lagaip–Kaugel Fault zones and collectively represent the para-autochthonous northern margin of the Australian craton. Samples from the interior zone, which in the study area comprises a cratonic spur of uncertain—probably displaced—origin, come from Triassic to Miocene sediments and subordinate volcanics of the Kubor Anticline, Jimi Terrane, and Yaveufa Syncline (16 localities) in the central and eastern Highlands. Samples from the exterior zone, which represent a basement-involved, Pliocene foreland fold-and-thrust belt, come from Middle Eocene to Middle Miocene carbonates and clastics (five localities) in the southern Highlands of the Papuan Fold Belt. Results permit us to constrain the tectonic evolution of the two zones palaeomagnetically. Using mainly thermal demagnetization techniques, three main magnetic components have been identified in the collection: (1) a recent field overprint of both normal and reverse polarity; (2) a pervasive overprint of mainly normal polarity that originated during extensive Middle to Late Miocene intrusive activity in the central cordillera; and (3) a primary component which has been identified in only 7 of the 21 localities (5 of 11 stratigraphic units represented in the collection). All components show patterns of rotation that are consistent within the zones, but differ between them. In the interior zone (central and eastern Highlands), large-scale counterclockwise rotations of between 30°+ and 100°+ have been established throughout the Kubor Anticline and Jimi Terrane, with some clockwise rotation present in the southern part of the Yaveufa Syncline. In contrast, in the Mendi area of the exterior zone (southern Highlands), clockwise rotations of between 30°+ and 50°+ can be recognized. These contrasting rotation patterns across the Tahin and Stolle–Lagaip–Kaugel Fault zones indicate decoupling of the two tectonic zones, probably along basement-involved faults. The clockwise rotations in the southern Highlands of the Papuan Fold Belt are to be expected from its structural grain, and are probably governed by regional basement faults and transverse lineaments. In contrast, the pattern of counterclockwise rotations in the Kubor Anticline–Jimi Terrane cratonic spur of the central and eastern Highlands was unexpected. The pattern is interpreted to result from non-rigid rotation of continental terranes as they were transported westward across the northeastern margin of the Australian craton. This margin became reorganised after the Middle Miocene, when the steadily northward-advancing Australian craton impinged into the westward-moving Pacific plate/buffer-plate system. Transpressional reorganisation under the influence of the sinistral Tonga–Sulawesi megashear became enhanced with Mio-Pliocene docking, and subsequent southward overthrusting, of the Finisterre Terrane onto the northeastern margin of the Australian craton.