融入WTO——为农业服务的化工矿产资源发展战略构想

我国直接为农业服务的磷、硫、钾矿资源总体形势不容乐观。针对各自资源特点,应采取不同的发展战略:磷——立足国内,有进有出,南出北进;硫——立足国内,适当进口,调整结构,必要储备;钾——稳定进口,国外开发,国内开发,国内找矿,四位一体,分三步走。为此建议:将磷、硫、钾纳入战略性矿产资源的范畴进行管理和规划;强化地勘队伍,加大找矿力度;增加投入,寻求新的突破;加大“走出去”的步伐;规范进出口秩序;国家在更高的层面进行宏观调控;拓宽为农业服务的新领域。     

Computation of Viscous Uniform and Shear Flow over A Circular Cylinder by A Finite Element Method

The incompressible viscous uniform and shear flow past a circular cylinder is studied. The two-dimensional Navier-Stokes equations are solved by a finite element method. The governing equations are discretized by a weighted residual method in space. The stable three-step scheme is applied to the momentum equations in the time integration. The numerical model is firstly applied to the computation of the lid-driven cavity flow for its validation. The computed results agree well with the measured data and other numerical results. Then, it is used to simulate the viscous uniform and shear flow over a circular cylinder for Reynolds numbers from lO0 to lO00. The transient time interval before the vortex shedding occurs is shortened considerably by introduction of artificial perturbation. The computed Strouhal number, drag and lift coefficients agree well with the experimental data. The computation shows that the finite element model can be successfully applied to the viscous flow problem.     

累托石制备润滑脂的初步研究

累托石是一种具有独特的结构组成和性质的粘土矿物,其既具有象蒙脱石一样的阳离子交换性,吸水膨胀性,制浆性等,又具有象云母一样的耐高温性和光滑性等性能。经提纯和有机改性后的累托石吸油速度快,膨胀率高,是一种较好的稠化剂,用它制备的润滑脂滴点〉６３３．１５Ｋ,远高于膨润土润滑脂的指标要求,研究表明,累托石是制备润肖脂稠化剂的好原料,累托石润滑脂是一种新型高温润滑脂。     

Design principle for parameters and interferences of tungsten carbide insert interface on roller bits

The lifetime of roll-bits with inserted tooth will be obviously decreased while drilling in strata and the tungsten carbide can be integrally separated from the roll-cone,which will need more trip out time to replace the roller bit.This study provides an entire analysis on stress as well as strength for teeth and tooth holes in loaded conditions.Qualities of tooth drop from matrix within roller bit.The optimized interferences of teeth inserted into the bit can be reasonably obtained by the critical interference derived from some relevant influence factors on the tooth-fixing quality of roller bits.     

Isotopic tracing of ore-forming source materials for Dexing porphyry copper deposit of Jiangxi, China

Dexing copper deposit is the biggest porphyry copper deposit in China. By researching isotopes of C, Si and Cu from the samples of Tongchang and Fujiawu ore-field, the authors found that δ^13 CpDB values of siderite were close to the δ^13 CpDB value of original magma; δ^30Si values of the samples at the ore-forming stage were close to the δ^30 Si value range of magma, δ^30Si values of partial samples were far away from it; Cu isotopic compositions of massive chalcopyrite formed at the early ore-forming stage are higher than that of veinal chalcopyrite formed at the later ore-forming stage. The results show that ore-forming materials were mainly derived from the porphyry body, and part of them were from wall rock materials.     

Anti-proliferative activity of phlorotannin extracts from brown algae Laminaria japonica Aresch

In this study,we evaluated the anti-proliferative activity of phlorotannins derived from brown algae Laminaria japonica Aresch extracts on the human hepatocellular carcinoma cell (BEL-7402) and on murine leukemic cells (P388) by MTT assay.Cells were incubated with 100 μg/mL of the phlorotannin extract (PE) for 48 h.The inhibitory rate of PE on BEL-7402 and P388 cells was 30.20±1.16% and 43.44±1.86%,respectively,and the half-inhibitory concentration of PE (IC50) on P388 and BEL-7402 cells was 120 μg/mL and >...     

Predicting size effect on diffusion-limited current density of oxygen reduction by copper wire

The size effect of copper wire radius (0.04–0.82 mm) on the diffusion-limited current density of an oxygen reduction reaction in stagnant simulated seawater (naturally aerated 0.5 mol/L NaCl) is investigated by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) and compared with the results obtained in 0.5 mol/L H2SO4. In the oxygen diffusion-limited range, size effect is found to occur independent of electrolytes, which is attributed to non-linear diffusion. Additionally, to sati...     

The grain-size characteristics of Quaternary deposits at Xingshan near Siping in Jilin province, China

This research paper analyses the grain-size characteristics of the Quaternary deposits at Xingshan near Siping, Jilin province in China by employing graphic measures to study the grain size distribution and its mode of transport and deposition. The Quaternary deposits at Xingshan lie unconformable on Cretaceous rocks made of siltstone, mudstone and sandstone. The average grain size is between 8.06 to 8.55Ф （0. 002 6 0. 003 7 mm）. The Quaternary deposits at Xingshan mainly compose of very fine silt to clay. The compositions of the grade are clay 63 % and silt 37 %. The clay size components are weathered debris transported and deposited by flowing water from the SE highlands or hills to the low lying NW Xingshan plains whereas the silty components accumulated by aoelian process. The Quaternary deposits at Xingshan accumulated in the middle and late Pleistocene interglacial periods from （459.12 - 39.03 ） ka to （88.92 - 7.56 ） ka. The standard deviation ranged from 0.96 to 1.36%, indicating that the sediments are moderately to poorly sorted, Coefficient of skewness ranged from 0.16 - 0.31 with an average skewness of 0. 218, （Positively skewed towards fine）. Kurtosis values （0.84- 1.05） from the grain size distribution and visual inspection of the frequency curves indicate platykurtic to mesokurtic curves and unimodal to bimodal grain-size distribution. The type of deposit formation is sand dune and the source is at a distal from its provenance.     

THE ULTRASTRUCTURE OF SEPARATED AND CULTURED CELL OF PORPHYRA YEZOENSIS

There are many reports that cells (protoplasts) separated from the thallus of Porphyra by enzyme can develop to normal leafy thalli in the same way as monopores. But there are few investigations on the subcellular structure of the isolated vegetative cell for ccmparison with the subcellular structure of monospores. To clarify whether the separated and cultured cells undergo the same or similar ultrastructure changes during culture and germination as monospores undergo in their formation and germination, we observed their ultrastructure, ccxnpared them with those of the monospore and found that the ultrastructure of separated and cultured cells did not have the characteristic feature as that of monospore formarion, such as production of small and large fibrous vesicles, but was acccxnpanied by vacuolation andstarch mobilization like that in monospore germination. The paper also discusses the relations between monospores and separated and cultured cells.     

X-ray afterglow of GRB 050712: multiple energy injections into the external shock

As indicated by observed X-ray flares,a great amount of energy can be intermittently released from the postburst central engine of gamma-ray bursts(GRBs).As a natural consequence,the GRB’s external shock could be repeatedly energized.With such a multiple energy injection model,we explore the unique X-ray afterglow light curve of GRB 050712,which exhibits four shallow decay plateaus.Together with three early X-ray flares,the central engine of GRB 050712 is believed to have released energy at least seven times after the burst.Furthermore,we find that the energies released during the four plateaus are all on the same order of magnitude,but the luminosity significantly decreased with time.These results may provide some interesting implications for the GRB central engine.