Baroclinic Buoyancy-Inertia Joint Stability Parameter

At present, the barotropic buoyant stability parameter has been derived from a vertical virtual displacement of a water parcel. The barotropic inertial stability parameter in the eccentrically cyclogeostrophic, basic current field was derived in 2003 from a horizontal cross-stream virtual displacement of a parcel. By expressing acceleration of a parcel due to a virtual displacement, which is arbitrarily sloping within a vertical section across the basic current, in terms of natural coordinates, we derived the vertical component of baroclinic buoyant stability parameter B ₂ ², the horizontal component of baroclinic inertial stability parameter I ₂ ², the baroclinic joint stability parameter J ², its buoyant component B ² and its inertial component I ². B ² is far greater than I ₂ ², and when neglecting relative vorticity except for vertical shear, a downward convex curve of J ² plotted against the slope of a virtual displacement follows a trend of B ² curve. If a parcel displaces along a horizontal surface or an isopycnal surface, however, B ² vanishes, and J ² becomes equal to I ². Actual parcel is apt to displace not only along the bottom slope, but also along the sea surface and an isopycnal interfacial surface, which is approximately equivalent to an isentropic surface, preferred by lateral mixing and exchange of momentum. Such actual displacement makes B ² vanishing, and grants I ² an important role. The present analysis of I ² examining effects due to curvature and horizontal and vertical shear vorticities are useful in deepening our understanding of baroclinic instability in actual oceanic streams.     

Summer distribution and geochemical composition of suspended-particulate matter in the east china sea

The distribution and geochemical composition of suspended-particulate matter (SPM) in the East China Sea (ECS) were investigated during the summer period of high continental runoff to elucidate SPM sources, distribution and cross-shelf transport. The spatial variability of SPM distribution (0.3–6.5 mg l⁻¹) and geochemical composition (POC, Al, Si, Fe, Mn, Ca, Mg and K) in the ECS was pronounced during summer when the continental fluxes of freshwater and terrestrial materials were highest during the year. Under the influences of Changjiang runoff, Kuroshio intrusion, surface production and bottom resuspension, the distribution generally showed strong gradients decreasing seaward for both biogenic and lithogenic materials. Particulate organic carbon was enriched in surface water (mean ∼18%) due to the influence of biological productivity, and was diluted by resuspended and/or laterally-transported materials in bottom water (mean 9.4%). The abundance of lithogenic elements (Al, Si, Fe, Mn) increased toward the bottom, and the distribution correlations were highly significant. Particulate CaCO₃ distribution provided evidence that the SPM of the bottom water in the northern part of the study area was likely mixed with sediments originally derived from Huanghe. A distinct benthic nepheloid layer (BNL) was present in all seaward transects of the ECS shelf. Sediment resuspension may be caused by tidal fluctuation and other forcing and be regarded as the principal agent in the formation of BNL. This BNL was likely responsible for the transport of biogenic and lithogenic particles across or along the ECS shelf. Total inventories of SPM, POC and PN are 46, 2.8 and 0.4 Tg, respectively, measured over the total area of 0.45 × 10⁶ km² of the ECS shelf. Their mean residence times are about 27, 13 and 11 days, respectively. The inventory of SPM in the water column was higher in the northernmost and southernmost transects and lower in the middle transects, reflecting the influences of terrestrial inputs from Changjiang and/or resuspended materials from Huanghe deposits in the north and perhaps from Minjiang and/or Taiwan’s rivers in the south. The distribution and transport patterns of SPM and geochemical elements strongly indicate that continental sources and cross-shelf transport modulate ECS particulate matter in summer.     

新生相形成的模拟实验研究

通过模拟实验制备了硅酸盐类不溶性固体，从Ｘ射线衍射特征和红外光谱特征两方面看，制得的硅酸盐类与河口新生相成分，结构相似，表明铁水解成的β－ＦｅＯＯＨ胶体吸附Ｓｉ，Ａｌ，Ｍｇ，Ｋ等元素，经结构重组可形成硅酸盐矿物，这可能是河口体系新生相的形成原因。     

甲醛前处理对提取海带褐藻胶质与量的影响

褐藻胶(Na-alginate)工业在国外已有半个多世纪的历史,其工艺流程及生产设备等都日趋标准化,产品的种类及其在工业上的用途也走向多样化。我国在五十年代初期曾呈奎和纪明侯就用野生的马尾藻作为原料进行了褐藻胶的提取研究,井确立了褐藻胶的生产工艺,从而诞生了我国的褐藻胶工业。六十年代以来,由于海带的大量人工栽培，褐藻胶生产便采用海带作为原料,由此,这个新兴工业迅猛发展。目前,中国的褐藻胶生产的规模和产量在世界上已名列前矛,除了主产品褐藻胶以外,还同时生产甘露醇、碘等联产品。但这个工业还存在不少问题,特別是褐藻胶的粘度、透明度及色泽等质量指标是人们极为关切的问题。本文拟就海藻原料的前处理工艺对胶的质量和产量的影响做一系统的研究。     

我国东部邻海恶劣天气的时空分布及其成因初探

本文利用1930～1979年NCDC海洋船舶观测的气象资料,分析了中国东部邻海恶劣天气的时空分布。结果表明,海区恶劣天气的分布在冬季和夏季是不同的;在东北和西南季风期间,台湾东北和西南海区也有差异。影响恶劣天气条件的分布因子非常复杂,主要是季风和极锋、天气系统、冷暖洋流及地形等因子。     

Optimum design of filament-wound multilayer-sandwich submersible pressure hulls

Submersible pressure hulls with fiber-reinforced multilayer-sandwich constructions have been developed in recent years as substitutes for classical metallic ring-stiffened pressure hulls. This study aims to optimize the design of filament-wound multilayer-sandwich submersible pressure hulls, taking into consideration the shell buckling strength constraint, the angle-ply laminated facing failure strength constraint and the low-density isotropic core yielding strength constraint under hydrostatic pressure using the hybrid genetic algorithm (HGA). The thickness of the facing, the thickness of the core layer, the orientation angle of the fibers in the facings and the shear modulus of the core material are taken as design variables. A sensitivity analysis is performed to study the effects of the operational depths and the hull shell geometry parameter, the length-to-diameter ratio (L/D), on the optimal design of filament-wound multilayer-sandwich submersible pressure hulls with graphite/epoxy, glass/epoxy and boron/epoxy composite facings. The results reveal that the optimal weight of various sandwich pressure hulls increases linearly with the operational depth, but it is almost unchanged as the geometry paramter. Furthermore, Graphite/Epoxy is the best choice for the material of the facings in a light-weight design. With reference to wall design, Boron/Epoxy is the best choice for the material of the facing at shallow depths, but Graphite/Epoxy is the best choice at extreme depths. Results of this study provide a valuable reference for designers of underwater vehicles.     

湛江港风暴增水特征分析

本文在统计1950－1997年影响湛江港的热带气旋的基础上，利用1953－1982年30年间湛江港发生的风暴增水的资料，对湛江港风暴增水的总体特征进行了分析，总结出湛江港风暴增水的特征在于季节分布的不均匀、大的正增水和高实测水位出现频繁、造成的风暴潮灾比较严重；通过两类典型风暴潮的详细分析，结果表明：湛江港的风暴增水与影响湛江的热带气旋密切相关，大的风暴增水主要由台风引起，湛江港的地理位置也是影响风暴增水的重要因子。     

国外海洋机器人技术发展动态

世界海洋机器人随着海洋事业的发展和军事上的需要正在迅猛发展,一批智能化的用途广泛的海洋机器人,如“深潜万米机器人”、“机器鱼”、“机器龙虾”、“六足蟹”、水下“飞机”和深海“呼吸器”等,相继研制成功,尚在研制中的机器人还有“机器金枪鱼”和“机器蛇”。     

沉积物镁铝含量比及其古气候意义

沉积物的镁铝含量比——m 值(m=100×MgO/Al_2O_3)与沉积水介质的盐度、pH 水温关系密切。当水温处在冰点以下时,沉积物的m 值随水温降低而增大。当水温处在冰点以上时,水介质的盐度、pH 和水温的增加,都有利于m 值增大。由于气候条件能直接或间接地影响沉积水介质的特征,因此,沉积物的m 值对古气候的变化具有一定的判别功能。通过对中国元古宙以来沉积物m 值的分析,发现古气候的热冷变化有1200Ma 的周期,其中还有次一级的热冷气候波动。第四纪的气候是处在热气候期后期的一个冷的气候波动阶段。