Application of the technique to ellipitical markers deformed by pressure-solution

Compression and extension axes are deduced from quartz deformation lamellae in a quartzite and a graywacke folded into an asymetrical syncline. Deformation lamellae fabrics in the two sandstones are distinctly different. In the graywacke, regardless of bedding orientation or position on the fold, compression axes are normal or nearly normal to the axial planar rough cleavage. Extension axes generally lie in the cleavage plane, parallel to dip. In most quartzite samples, compression axes are parallel or subparallel to bedding, at high angles to the fold axis and extension axes are normal to bedding. Two samples from the very base of the formation indicate compression parallel to the fold axis with extension parallel to bedding, at high angles to the fold axis. One of these two shows both patterns. The lamellae fabric geometry in these two samples suggests the presence of a neutral surface in the quartzite. The lamellae-derived compression and extension axes are in good agreement with the buckling behavior of a viscous layer (quartzite) embedded in a less viscous medium (graywacke and shale below and shale and carbonate above).     

Potential toxicity of resuspended particulate matter and sediments: Environmental samples from the Bay of Banyuls-sur-Mer and Thermaikos Gulf

This contribution attempts to determine whether, and to what degree, environmental samples of resuspended particulate matter and sediments exert a toxicological impact. Further, an attempt is made also to screen the toxic level of potentially hazardous sites, based upon established sediment toxicity criteria. Therefore, a rapid, cost-effective and highly sensitive biotest (bioluminescence assay, based upon marine bacteria) has been applied on: biological fluid extracts; bottom sediments; and sediment trap samples. Samples were taken either from the Bay of Banyuls-sur-Mer (northwestern Mediterranean, France) or Thermaikos Gulf (northeastern Mediterranean, Greece). Biological fluid extracts and sediment trap samples corresponded to periods of resuspension events, or preceding and following such events.The results have revealed that the sampling strategy and biotest implemented in this study might be a useful tool for screening the toxicity of resuspended matter and sediments. Resuspension events appear to be able to exert an influence on the chemical forms of the micro-pollutants; thus on their bioavailability and toxicity. Nevertheless, based upon chemical analysis combined with the bioassay, the toxic level of the sediment samples could be determined, with the level at potentially hazardous sites being characterised.     

Effects of rainfall on oil droplet size and the dispersion of spilled oil with application to Douglas Channel,British Columbia,Canada

Raindrops falling on the sea surface produce turbulence. The present study examined the influence of rain-induced turbulence on oil droplet size and dispersion of oil spills in Douglas Channel in British Columbia, Canada using hourly atmospheric data in 2011–2013. We examined three types of oils: a light oil (Cold Lake Diluent - CLD), and two heavy oils (Cold Lake Blend - CLB and Access Western Blend - AWB). We found that the turbulent energy dissipation rate produced by rainfalls is comparable to what is produced by wind-induced wave breaking in our study area. With the use of chemical dispersants, our results indicate that a heavy rainfall (rain rate > 20 mm h^? 1) can produce the maximum droplet size of 300 μm for light oil and 1000 μm for heavy oils, and it can disperse the light oil with fraction of 22–45% and the heavy oils of 8–13%, respectively. Heavy rainfalls could be a factor for the fate of oil spills in Douglas Channel, especially for a spill of light oil and the use of chemical dispersants.     

Measurements of the north polar cap of Mars and the Earth's northern hemisphere ice and snow cover

The boundaries of the polar caps of Mars have been measured on more than 3000 photographs since 1905 from the plate collection at the Lowell Observatory. For the Earth, the polar caps have been accurately mapped only since the mid 1960's when satellites were first available to synoptically view the polar regions. The polar caps of both planets wax and wane in response to changes in the seasons, and interannual differences in polar cap behavior on Mars as well as Earth are intimately linked to global energy balance. Data on the year to year variations in the extent of the north polar caps of Mars and Earth have been assembled and compared, although only 6 years of concurrent data were available for comparison.     

Dissolved metals and associated constituents in abandoned coal-mine discharges,Pennsylvania, USA. Part 1: Constituent quantities and correlations

Complete hydrochemical data are rarely reported for coal-mine discharges (CMD). This report summarizes major and trace-element concentrations and loadings for CMD at 140 abandoned mines in the Anthracite and Bituminous Coalfields of Pennsylvania. Clean-sampling and low-level analytical methods were used in 1999 to collect data that could be useful to determine potential environmental effects, remediation strategies, and quantities of valuable constituents. A subset of 10 sites was resampled in 2003 to analyze both the CMD and associated ochreous precipitates; the hydrochemical data were similar in 2003 and 1999. In 1999, the flow at the 140 CMD sites ranged from 0.028 to 2210 L s⁻¹, with a median of 18.4 L s⁻¹. The pH ranged from 2.7 to 7.3; concentrations (range in mg/L) of dissolved (0.45-μm pore-size filter) SO₄ (34–2000), Fe (0.046–512), Mn (0.019–74), and Al (0.007–108) varied widely. Predominant metalloid elements were Si (2.7–31.3 mg L⁻¹), B (<1–260 μg L⁻¹), Ge (<0.01–0.57 μg L⁻¹), and As (<0.03–64 μg L⁻¹). The most abundant trace metals, in order of median concentrations (range in μg/L), were Zn (0.6–10,000), Ni (2.6–3200), Co (0.27–3100), Ti (0.65–28), Cu (0.4–190), Cr (<0.5–72), Pb (<0.05–11) and Cd (<0.01–16). Gold was detected at concentrations greater than 0.0005 μg L⁻¹ in 97% of the samples, with a maximum of 0.0175 μg L⁻¹. No samples had detectable concentrations of Hg, Os or Pt, and less than half of the samples had detectable Pd, Ag, Ru, Ta, Nb, Re or Sn. Predominant rare-earth elements, in order of median concentrations (range in μg/L), were Y (0.11–530), Ce (0.01–370), Sc (1.0–36), Nd (0.006–260), La (0.005–140), Gd (0.005–110), Dy (0.002–99) and Sm (<0.005–79). Although dissolved Fe was not correlated with pH, concentrations of Al, Mn, most trace metals, and rare earths were negatively correlated with pH, consistent with solubility or sorption controls. In contrast, As was positively correlated with pH.     

Effects of variation in loading protocol on the strength and deformation capacity of ductile reinforced concrete beams

Understanding the impact of prior earthquake damage on residual capacity is important for postearthquake damage assessment of buildings; however, interpretation of such impact is challenging when based on tests using traditional reversed‐cyclic loading protocols. A new loading protocol, consisting of a dynamic earthquake displacement history followed by quasi‐static reversed‐cyclic loading to failure, is presented as an alternative to traditional simulated seismic loading protocols. Data are analyzed from a set of 12 nominally identical ductile reinforced concrete beams that were tested by using variations of this protocol and traditional reversed‐cyclic and monotonic protocols. Differences in the cycle content of the earthquake displacement histories applied to the test specimens allowed for the effects of load history variation below 2.2% drift to be isolated. It is found that such variation had no effect on the beam deformation capacities. The effects of dynamic loading rates are also analyzed and compared against control quasi‐static specimens. Relative strength increases due to dynamic loading are found to be more significant at yield than at ultimate. Dynamic loading rates led to modest reductions in the beam deformation capacities, but the presence of causality between these variables remains uncertain.     

A map series of the Southern East Pacific Rise and its flanks, 15° S to 19° S

Four large-scale bathymetric maps of the Southern East Pacific Rise and its flanks between 15° S and 19° S display many of the unique features of this superfast spreading environment including abundant seamounts (the Rano Rahi Field), axial discontinuities, discontinuity migration, and abyssal hill variation. Along with a summary of the regional geology, these maps will provide a valuable reference for other sea-going programs on-and off-axis in this area, including the Mantle ELectromagnetic and Tomography (MELT) experiment.     

Reply to the Discussion by Rose of Phelps et al. (2014) ‘Oceanographic and eustatic control of carbonate platform evolution and sequence stratigraphy on the Cretaceous (Valanginian–Campanian) passive margin,northern Gulf of Mexico’, Sedimentology, 61, 461–496

Discussion points raised by Rose ( 2016 ) concentrate on late Albian stratigraphic relationships between formations of the East Texas Basin and the San Marcos Arch of the Comanche Platform in the northern Gulf of Mexico. Criticisms of Phelps et al. (2014) regarding stratigraphic nomenclature, palaeogeography and regional lithostratigraphic correlations generally focus on interpretive aspects of the study or do not account for the full scope of published information. Revisions to the top Aptian–Albian Supersequence boundary by Rose are incompatible with the relative location of a subaerial unconformity, as well as deepening lithofacies trends and retrogradational stratigraphic patterns below the interpreted boundary. Rose's placement of the top Aptian–Albian Supersequence boundary precisely at the Albian–Cenomanian stage boundary also implies ca 1·4 Ma of diachroneity in second order sea‐level patterns between the northern Gulf of Mexico and other documented global sedimentary basins.