Clastic injectites,internal structures and flow regime during injection: The Sea Lion Injectite System,North Falkland Basin

This paper details and describes a suite of 143 sub-seismic-scale clastic injectites encountered within the early Cretaceous, early post-rift of the deep-lacustrine North Falkland Basin. The injectites, referred to here as the Sea Lion Injectite System, are encountered below, above and in between the hydrocarbon-bearing, deep-lacustrine turbidite sandstones of the Bleaker 30, Sea Lion North, Sea Lion, Casper and Beverley fans. Sedimentary structures are documented within the injectites including: planar laminations, mud-clast imbrication and clast alignment. Clasts align along centimetre-scale foresets formed through ripple-scale bedform migration in a hydraulically-open fracture. The style of flow within the injectite system is interpreted as initially through fluid turbulence during an open fracture phase, which was followed by a later stage where laminar flow dominated, most likely during the closing phase of the fracture system. The host rocks display evidence for ductile deformation, which along with ptygmatic folding of dykes and internally injected mud-clasts, suggests a period of injection into relatively uncompacted sediments. Evidence for brittle fracturing, in the form of stepped margins may be indicative of a separate phase of emplacement into more-compacted sediments. This variability in deformation styles is related to multi-phased injection episodes into host strata at different stages of consolidation and lithification at shallow burial depths. Injectites have been identified in four stratigraphic groupings: above the Bleaker 30 Fan and within/above the Sea Lion North Fan; within the hydrocarbon-bearing Sea Lion Fan; overlying the Sea Lion Fan; and above/below the hydrocarbon-bearing Casper and Beverley fans. This spatial association with the hydrocarbon-bearing fans of the North Falkland Basin is important, considering the ability of injectite networks to form effective fluid-flow conduits in the subsurface. Consequently, the findings of this study will improve the characterization of sub-seismic scale injectites (and therefore fluid conduits) within otherwise impermeable strata.     

The sedimentology of an ephemeral fluvial–aeolian succession

Ephemeral fluvial systems are commonly associated with arid to semi-arid climates. Although their complex sedimentology and depositional settings have been described in much detail, depositional models depicting detailed lateral and vertical relationships, and interactions with coeval depositional environments, are lacking compared to well-recognized meandering and braided fluvial systems. This study critically evaluates the applicability of current models for ephemeral fluvial systems to an ancient arid fluvial example of the Lower Jurassic Kayenta Formation of the Colorado Plateau, USA. The study employs detailed sedimentary logging, palaeocurrent analysis and photogrammetric panels across the regional extent of the Kayenta. A generic model that accounts for the detailed sedimentology of a sandy arid ephemeral fluvial system (drawing upon both ancient and geomorphological studies) is developed, along with analysis of the spatial and temporal interactions with the aeolian setting. Results show that the ephemeral system is dominated by laterally and vertically amalgamated, poorly channelized to sheet-like elements, with abundant upper flow regime flat beds and high sediment load structures formed between periods of lower flow regime conditions. Through interaction with a coeval aeolian system, most of the fluvial deposits are dominated by sand-grade sediment, unlike many modern ephemeral fluvial systems that contain a high proportion of conglomeratic and/or finer grained mudstone and siltstone deposits. During dominantly fluvial deposition, high width to thickness ratios are observed for channelized and sheet-like elements. However, with increasing aridity, the aeolian environment becomes dominant and fluvial deposition is restricted to interdune corridors, resulting in lower width to thickness ratio channels dominated by flash-flood and debris-flow facies. The data presented here, coupled with modern examples of ephemeral systems and flood regimes, suggest that ephemeral flow produces and preserves distinctive sedimentological traits that can not only be recognized in outcrops, but also within core.     

Florisbad—New investigations at a middle stone age Hominid Site in South Africa

First results of renewed excavations at the Middle Stone Age spring site of Florisbad are reported. Seven meters of deposits dating possibly from the later mid-Pleistocene to the mid-Holocene contain several cultural phases and record alternating periods of increased spring flow versus more stabilized conditions. The archaic Homo sapiens cranium discovered in 1932 and the Florisian Land Mammal Age fauna retrieved from the springs are argued to derive from the earliest deposits, estimated to be ca. 100,000–200,000 years old. In an Upper Pleistocene layer beyond the range of Carbon-14 dating, a Middle Stone Age occupation floor has been excavated. This we interpret as a multiple-occupation kill, butchery, or scavenging site. The presence of a hearth, of chipping debris under 10 mm in size, and the limited displacement of artifacts which have been refitted as conjoining pieces demonstrate a minimally disturbed, primary context site.     

A comparison of the rotational properties of T Tauri stars in Orion and Taurus

We analyse the distribution of projected equatorial velocities ( v  sin  i ) for a magnitude-limited sample of stars in Taurus, in order to assess whether this sample can contain a population of fast rotators (missed in previous photometric monitoring campaigns) similar to those recently discovered in Orion by Stassun et al. We find strong evidence, in line with the results of photometric monitoring campaigns in Taurus, that there is no such population of stars in Taurus that rotate at a large fraction of breakup velocity. We thus demonstrate that the stellar rotation distributions in the two star-forming regions are intrinsically different (with a statistical significance of this discrepancy in excess of 3 σ ), and discuss possible origins for this difference.     

Modeling North American Freshwater Runoff through the Last Glacial Cycle

The Northern Hemisphere ice sheets decayed rapidly during deglacial phases of the ice-age cycle, producing meltwater fluxes that may have been of sufficient magnitude to perturb oceanic circulation. The continental record of ice-sheet history is more obscured during the growth and advance of the last great ice sheets, ca. 120,000–20,000 yr B.P., but ice cores tell of high-amplitude, millennial-scale climate fluctuations that prevailed throughout this period. These climatic excursions would have provoked significant fluctuation of ice-sheet margins and runoff variability whenever ice sheets extended to mid-latitudes, giving a complex pattern of freshwater delivery to the oceans. A model of continental surface hydrology is coupled with an ice-dynamics model simulating the last glacial cycle in North America. Meltwater discharged from ice sheets is either channeled down continental drainage pathways or stored temporarily in large systems of proglacial lakes that border the retreating ice-sheet margin. The coupled treatment provides quantitative estimates of the spatial and temporal patterns of freshwater flux to the continental margins. Results imply an intensified surface hydrological environment when ice sheets are present, despite a net decrease in precipitation during glacial periods. Diminished continental evaporation and high levels of meltwater production combine to give mid-latitude runoff values that are highly variable through the glacial cycle, but are two to three times in excess of modern river fluxes; drainage to the North Atlantic via the St. Lawrence, Hudson, and Mississippi River catchments averages 0.356 Sv for the period 60,000–10,000 yr B.P., compared to 0.122 Sv for the past 10,000 yr. High-amplitude meltwater pulses to the Gulf of Mexico, North Atlantic, and North Pacific occur throughout the glacial period, with ice-sheet geometry controlling intricate patterns of freshwater routing variability. Runoff from North America is staged in the final deglaciation, with a stepped sequence of pulses through the Mississippi, St. Lawrence, Arctic, and Hudson Strait drainages.     

Pyroclastic current dynamic pressure from aerodynamics of tree or pole blow-down

The common occurrence of tree and pole blow-down from pyroclastic currents provides an opportunity to estimate properties of the currents. Blow-down may occur by uprooting (root zone rupture), or flexure or shear at some point on the object. If trees are delimbed before blow-down, each tree or pole can be simulated by a cylinder perpendicular to the current. The force acting on a cylinder is a function of flow dynamic pressure, cylinder geometry, and drag coefficient. Treated as a cantilever of circular cross-section, the strength for the appropriate failure mode (rupture, uprooting or flexure) can then be used to estimate the minimum necessary current dynamic pressure. In some cases, larger or stronger standing objects can provide upper bounds on the dynamic pressure. This analysis was treated in two ways: (1) assuming that the current properties are vertically constant; and (2) allowing current velocity and density to vary vertically according to established models for turbulent boundary layers and stratified flow. The two methods produced similar results for dynamic pressure. The second, along with a method to approximate average whole-current density, offers a means to estimate average velocity and density over the height of the failed objects. The method is applied to several example cases, including Unzen, Mount St. Helens, Lamington, and Merapi volcanoes. Our results compare reasonably well with independent estimates. For several cases, we found that it is possible to use the dynamic pressure equations developed for vertically uniform flow, along with the average cloud density multiplied by a factor of 2–5, to determine average velocity over the height of the failed object.     

Cretaceous high-P granulites at Milford Sound, New Zealand: metamorphic history and emplacement in a convergent margin setting

Granulite facies orthogneiss of the Arthur River Complex (ARC) at Milford Sound, western Fiordland records a complex Early Cretaceous magmatic and orogenic history for the Pacific Gondwana margin that culminated in the emplacement and burial of a dioritic batholith, the Western Fiordland Orthogneiss (WFO). Enstatite-bearing mafic to intermediate protoliths of the ARC and WFO intruded the middle to upper crust. The early deformation history of the ARC is preserved in the Pembroke Granulite, where two-pyroxene S1 assemblages that reflect P <8 kbar and T  >750 °C were only patchily recrystallized during later deformation. S1 is cut by garnet-bearing, leucogabbroic to dioritic veins, which are cut by distinctive D2 fractures involving anorthositic veins and garnet–diopside–plagioclase-bearing reaction zones. These zones are widespread in the ARC and WFO and record conditions of P ≈14 kbar and T  >750 °C. Garnet–clinopyroxene-bearing corona reaction textures that mantle enstatite in both the ARC and WFO reflect Early Cretaceous burial by approximately 25 km of continental crust. Most of the ARC is formed from the Milford and Harrison Gneisses, which contain steeply dipping S4 assemblages that envelop the Pembroke Granulite and involve garnet, hornblende, diopside, clinozoisite, rutile and plagioclase, with or without kyanite. The P–T history of rocks in western Fiordland reflects pronounced Early Cretaceous convergence-related tectonism and burial, possibly related to the collision and accretion of island arc material onto the Pacific Gondwana margin.     

Shallow-water imaging multibeam sonars: A new tool for investigating seafloor processes in the coastal zone and on the continental shelf

Hydrographic quality bathymetry and quantitative acoustic backscatter data are now being acquired in shallow water on a routine basis using high frequency multibeam sonars. The data provided by these systems produce hitherto unobtainable information about geomorphology and seafloor geologic processes in the coastal zone and on the continental shelf.Before one can use the multibeam data for hydrography or quantitative acoustic backscatter studies, however, it is essential to be able to correct for systematic errors in the data. For bathymetric data, artifacts common to deep-water systems (roll, refraction, positioning) need to be corrected. In addition, the potentially far greater effects of tides, heave, vessel lift/squat, antenna motion and internal time delays become of increasing importance in shallower water. Such artifacts now cause greater errors in hydrographic data quality than bottom detection. Many of these artifacts are a result of imperfect motion sensing, however, new methods such as differential GPS hold great potential for resolving such limitations. For backscatter data, while the system response is well characterised, significant post processing is required to remove residual effects of imaging geometry, gain adjustments and water column effects. With the removal of these system artifacts and the establishment of a calibrated test site in intertidal regions (where the seabed may be intimately examined by eye) one can build up a sediment classification scheme for routine regional seafloor identification.When properly processed, high frequency multibeam sonar data can provide a view of seafloor geology and geomorphology at resolutions of as little as a few decimetres. Specific applications include quantitative estimation of sediment transport rates in large-scale sediment waves, volume effects of iceberg scouring, extent and style of seafloor mass-wasting and delineation of structural trends in bedrock. In addition, the imagery potentially provides a means of quantitative classification of seafloor lithology, allowing sedimentologists the ability to examine spatial distributions of seabed sediment type without resorting to subjective estimation or prohibitively expensive bottom-sampling programs. Using Simrad EM100 and EM1000 sonars as an example, this paper illustrates the nature and scale of possible artifacts, the necessary post-processing steps and shows specific applications of these sonars.