Large-scale dune erosion tests to study the influence of wave periods

Large-scale physical model tests were performed to quantify the effects of the wave period on dune erosion. Attention was focussed on 2D cross-shore effects in a situation with sandy dunes and extreme water levels and wave conditions. Besides profile measurements, detailed measurements in time and space of water pressure, flow velocities and sediment concentrations were performed in the near near-shore area. It was concluded that a longer wave period leads to a larger dune erosion volume and to a larger landward retreat of the dune face. Tests with double-peaked wave spectra showed that the influence of the spectral shape on dune erosion was best represented by the T_m − 1,0 spectral mean wave period, better than the peak wave period, T_p. The effect of the wave period on dune erosion was implemented in a dune erosion prediction method that estimates erosion volumes during normative storm conditions for the Dutch coast. More details of the measurements and additional analyses of physical processes are described in an accompanying paper by Van Thiel de Vries et al. [Van Thiel de Vries, J.S.M., van Gent, M.R.A., Reniers, A.J.H.M. and Walstra, D.J.R., submitted for publication. Analysis of dune erosion processes in large scale flume experiments, In this volume of Coastal Engineering.].     

Developing a building policy for the erosion zone: Solutions to some key (Dutch) questions

In those coastal communities where the most seaward strip of mainland consists of dunes, these dunes often serve as a flexible sea defence. In addition, this strip offers large potential for housing and commercial enterprises. Unfortunately, due to severe storm surges part of this strip (the erosion zone) is subject to erosion, and as a result of which any buildings or infrastructure located here, are destroyed. Therefore, as we will illustrate in this paper, a building policy for this zone should reflect a compromise between two opposite interests: exploitation of the existing potential and, prevention of an unacceptable high risk due to erosion. Accordingly, the authors have developed a framework for such a building policy on the basis of which the desirability of various different types of investments and the location within the erosion zone of such investments can be determined. The examples that are used to illustrate this framework in this paper are limited to experiences in The Netherlands as relevant data and experiences are available and relatively easy accessible here. Nevertheless, the approach as is described is generic and applicable worldwide suggesting that the discovered unused potential for exploitation is not just limited to The Netherlands.     

Projections of severe droughts in future climate in Southeast Brazil: a case study in Southern Minas Gerais State,Brazil

Theoretical and Applied Climatology - South of Minas Gerais state, in Southeast Brazil, is known for the coffee crop production (more than 30% of country’s production) and hydroelectricity...     

Analysis of aquifer vulnerability and water quality using SINTACS and geographic weighted regression

Aquifer vulnerability and water quality were assessed in the Central Valleys of Oaxaca (Mexico) using the SINTACS method, based on a geographic information system. SINTACS layers were prepared using data such as climate (rainfall and temperature), water table, hydraulic conductivity, geology, soil type and topographic model. Maps for water quality index (WQI), contamination index and pollution sources index (PSI) were also obtained by this work. Groundwater quality in the Central Valleys may be affected by two factors, those with an anthropogenic origin and those with natural origin. High vulnerability values are located in the valleys of the basin, where granular sediments are exposed. Low vulnerability values are distributed in the basin??s ranges, where metamorphic rocks are found. Given that many of the zones with the highest groundwater vulnerability values correspond to zones with the greatest PSI values, there is great risk of groundwater contamination for the area of study because external (indicated by PSI) and internal (indicated by SINTACS) factors that cause pollution can be frequently observed in the same place. Geographic weighted regression (GWR) is used to test the dependency between WQI as dependent variable and SINTACS, PSI, Urban localities, Agriculture, Pastures and Rivers as predictors. The results indicate the non-stationary behavior of the dependent variable with respect to the predictors. While the obtained GWR models used to model WQI cannot be used in practical situations to predict the behavior of said variable, they can be used to estimate the degree to which the predictors influence the variable of interest.     

断层参数对承压水体上采煤的影响分析

根据流固耦合理论,采用有限元数值模拟的方法,针对承压水体上采煤过程中断层参数(断距、倾角)对煤层、围岩的应力、变形和水压力变化的影响进行了模拟分析,探讨了存在断层时突水的机理和可能的突水点位置,并定量分析了防水煤柱的预留距离。得出以下结论:(1)当存在正断层时,多发生断层破坏型突水,而底板破坏型突水发生的几率较小;(2)突水性质和突水发生位置受断层断距和倾角的影响不大,煤层和采煤工作面附近的底板围岩都可能成为突水涌出点;(3)随着断层断距和倾角的增加,防水煤柱的合理留设距离应随之增大。以上结果可为实际矿井采煤防突水设计提供参考。 更多还原     

Recognition of geochemical footprints of mineral systems in the regolith at regional to continental scales

Understanding the character of Australia's extensive regolith cover is crucial to the continuing success of mineral exploration. We hypothesise that the regolith contains geochemical fingerprints of processes related to the development and preservation of mineral systems at a range of scales. We test this hypothesis by analysing the composition of surface sediments within greenfield regional-scale (southern Thomson Orogen) and continental-scale (Australia) study areas. In the southern Thomson Orogen area, the first principal component (PC1) derived in our study [Ca, Sr, Cu, Mg, Au and Mo at one end; rare earth elements (REEs) and Th at the other] is very similar to the empirical vector used by a local company (enrichment in Sr, Ca and Au concomitant with depletion in REEs) to successfully site exploration drill holes for Cu–Au mineralisation. Mapping of the spatial distribution of PC1 in the region reveals several areas of elevated values and possible mineralisation potential. One of the strongest targets in the PC1 map is located between Brewarrina and Bourke in northern New South Wales. Here, exploration drilling has intersected porphyry Cu–Au mineralisation with up to 1 wt% Cu, 0.1 g/t Au, and 717 ppm Zn. The analysis of a comparable geochemical dataset at the continental scale yields a compositionally similar PC1 (Ca, Sr, Mg, Cu, Au and Mo at one end; REEs and Th at the other) to that of the regional study. Mapping PC1 at the continental scale shows patterns that (1) are spatially compatible with the regional study and (2) reveal several geological regions of elevated values, possibly suggesting an enhanced potential for porphyry Cu–Au mineralisation. These include well-endowed mineral provinces such as the Curnamona and Capricorn regions, but also some greenfield regions such as the Albany-Fraser/western Eucla, western Murray and Eromanga geological regions. We conclude that the geochemical composition of Australia's regolith may hold critical information pertaining to mineralisation within/beneath it.     

Changing trust relations within the Dutch fishing industry: The case of National Study Groups

This paper focuses on changing trust relationships among fishermen following new governance arrangements. The previous ‘thick’ trust relationships that characterized the Dutch fisheries industry under a neo-corporatist arrangement had resulted in an isolation of local fishermen groups vis-à-vis outsiders. However, under new governance arrangements, in particular the so-called Study Groups, these trust relationships are changing. The establishment of Study Groups, where fishermen from different localities have to cooperate on sustainability innovations in order to receive subsidies, lead to more diversity within the industry, more collaborations across localities and new forms of ‘thin’ trust. As such, these Study Groups can be understood as successful experiments in further opening up of the fisheries community.     

Tectonic and sedimentary basin evolution of the eastern Bangong–Nujiang zone (Tibet): a Reading cycle

The ophiolite-bearing Bangong-Nujiang zone (BNZ) traversing central Tibet from east to west separates the Qiangtang block in the north from the Lhasa block in the south. Their stratigraphic development indicates that both blocks once formed a continuous continental platform until the Late Triassic. Following Late Paleozoic-Triassic rifting, ocean crust formed between both blocks during the Late Triassic creating the Dongqiao-Naqu basin (DNB) among other basins (Yu et al. 1991). The analysis of the rift flank sequences reveals that rifting was dominated by transtension. The basin was shortened by post-Mid-Cretaceous transpression. Thus, the overall basin evolution represents a Reading cycle despite some active margin processes which gave this cycle a special imprint. Major basin parts were preserved despite transpressional shortening suggesting that the eastern BNZ represents a remnant basin. Our understanding of the DNB solves the prior problem of viewing the BNZ as a Mid-Late Jurassic collisional suture although typical collision-related deformation, thickening, mountain building, as well as related molasse formation are lacking. Our model also explains the scattered linear ophiolite distribution by local transpression of remnant oceanic basin floor without having to consider problematic long range ophiolite thrusting.