Coastal Impacts of the March 11th Tohoku, Japan Tsunami in the Galapagos Islands

On March 11, 2011 at 5:46:23 UTC (March 10 11:46:23 PM Galapagos Local Time), the M_w 9.0 Great East Japan Earthquake occurred near the Tohoku region off the east coast of Japan, spawning a Pacific-wide tsunami. Approximately 12,000 km away, the Galapagos Islands experienced moderate tsunami impacts, including flooding, structural damage, and strong currents. In this paper, we present observations and measurements of the tsunami effects in the Galapagos, focusing on the four largest islands in the archipelago; (from west to east) Isabela, Santiagio, Santa Cruz, and San Cristobal. Access to the tsunami affected areas was one of the largest challenges of the field survey. Aside from approximately ten sandy beaches open to tourists, all other shoreline locations are restricted to anyone without a research permit; open cooperation with the Galapagos National Park provided the survey team complete access to the Islands coastlines. Survey locations were guided by numerical simulations of the tsunami performed prior to the field work. This numerical guidance accurately predicted the regions of highest impact, as well as regions of relatively low impact. Tide-corrected maximum tsunami heights were generally in the range of 3–4 m with the highest runup of 6 m measured in a small pocket beach on Isla Isabela. Puerto Ayora, on Santa Cruz Island, the largest harbor in the Galapagos experienced significant flooding and damage to structures located at the shoreline. A current meter moored inside the harbor recorded relatively weak tsunami currents of less than 0.3 m/s (0.6 knot) during the event. Comparisons with detailed numerical simulations suggest that these low current speed observations are most likely the result of data averaging at 20-min intervals and that maximum instantaneous current speeds were considerably larger. Currents in the Canal de Itabaca, a natural waterway between Santa Cruz Island and a smaller island offshore, were strong enough to displace multiple 5.5-ton navigation buoys. Numerical simulations indicate that currents in the Canal de Itabaca exceeded 4 m/s (~8 knots), a very large flow speed for a navigational waterway.     

Rock-magnetic and paleomagnetic results from the Tepic-Zacoalco rift region (western Mexico)

A rock-magnetic and paleomagnetic investigation was carried out on eleven Pleistocene and Pliocene ⁴⁰Ar/³⁹Ar dated lava flows from the Tepic-Zacoalco rift region in the western sector of the Trans-Mexican Volcanic Belt (TMVB) with the aim of obtaining new paleomagnetic data from the study region and information about the Earth’s magnetic field recorded in these rocks. Rock-magnetic experiments including measurement of thermomagnetic curves, hysteresis parameters and isothermal remanence acquisition curves were carried out to find out the carriers of remanent magnetisation and to determine their domain structure. Although some samples were characterised by the presence of a single ferromagnetic phase (magnetite), in most cases more phases were observed. Analysis of hysteresis parameters showed a mixture of single domain and multidomain particles, the fraction of the latter varying between 40% and 80%. Paleomagnetic results were obtained in all sites, although in 7 sites characteristic remanence directions and remagnetisation circles had to be combined in order to calculate site means. The six Pliocene sites not showing intermediate polarity yielded a paleomagnetic pole (latitude ? = 81.1°, longitude λ = 94.3°) which roughly agrees with the expected one. Paleomagnetic directions do not indicate significant vertical-axis block rotations in the western TMVB area. Reversed polarities observed can be correlated to the Gilbert chron, normal polarities to the Gauss chron or the Brunhes chron and intermediate polarities to the Cochiti-Gilbert or the Gilbert-Gauss transition. The reversed or intermediate polarity magnetisation recorded in one of the sites (542 ± 24 ka) corresponds either to the West Eifel 4 or the West Eifel 5 excursion, while the reversed polarity observed in the other site (220 ± 36 ka) very likely provides new evidence for the Pringle Falls excursion or the event recorded in the Mamaku ignimbrite.     

Rock‐Magnetic and Archaeointensity Investigation of Pottery and a Burned Floor at the Tzintzuntzan Archaeological Site,Western Mexico

We report a detailed rock‐magnetic and archaeointensity analysis of four pottery fragments and a burned floor recovered from the Tzintzuntzan archaeological site in western Mexico. Results from rock‐magnetic experiments (x‐T curves and first‐order reversal curves [FORC] diagrams) indicate the suitability of most of these materials as faithful geomagnetic field recorders. Potsherds were archaeomagnetically dated by comparing their mean intensity values against the paleosecular variation curve CALS3k, suggesting A.D. 600–941 as the most probable age range. This is younger than ¹⁴C‐dated charcoal from the same burned floor (A.D. 1294–1426). More precise age estimates will require the use of the full geomagnetic vector (declination, inclination, and intensity). Multiple reheatings of the ceramic pieces, evidenced as secondary components in Zijderveld plots, could reflect multiple heating of these objects, perhaps from use as incense burners. Our study demonstrates the potential of archaeomagnetic analysis to both date burned ceramics recovered in situ and provide insight into their use‐history.     

GGR Biennial Critical Review: Analytical Developments Since 2012

Advances in the chemical, crystallographic and isotopic characterisation of geological and environmental materials can often be ascribed to technological improvements in analytical hardware or to innovative approaches to data acquisition and/or its interpretation. This biennial review addresses key laboratory methods that form much of the foundation for analytical geochemistry; again, this contribution is presented as a compendium of laboratory techniques. We highlight advances that have appeared since January 2012 and that are of particular significance for the chemical and isotopic characterisation of geomaterials. Prominent scientists from the selected analytical fields present publications they judge to be particular noteworthy, providing background information about the method and assessing where further opportunities might be anticipated. In addition to the well‐established technologies such as thermal ionisation mass spectrometry and plasma emission spectroscopy, this publication also presents new or rapidly growing methods such as electron backscattered diffraction analysis and atom probe tomography – a very sensitive method providing atomic scale information.     

Fault controlled Carboniferous A-type magmatism in the proto-Andean foreland (Sierras Pampeanas,Argentina): Geochemical constraints and petrogenesis

The intrusion of granitoids into the Eastern Sierras Pampeanas in the Early Carboniferous took place after a long period of mainly compressional deformation that included the Famatinian (Ordovician) and Achalian (Devonian) orogenies. These granitoids occur as small scattered plutons emplaced in a dominant extensional setting, within older metamorphic and igneous rocks, and many of them are arranged along a reactivated large shear zone. A set of 46 samples from different granitic rocks: Huaco granitic complex, San Blas pluton, and the La Chinchilla stock from the Sierra de Velasco, Zapata granitic complex from Sierra de Zapata, and the Los Árboles pluton from Sierra de Fiambalá, display high and restricted SiO₂ contents between 69.2 and 76.4 wt.%. On both FeO/(FeO + MgO) vs. SiO₂ and [(Na₂O + K₂O) ? CaO] vs. SiO₂ plots the samples plot in the ferroan and alkaline-calcic to calco-alkaline fields (FeO/(FeO + MgO) = 0.88–1.0%;[(Na₂O + K₂O) ? CaO] = 6.3–8.3%), thus showing an A-type granitoid signature. The high concentrations for the High Field Strength Elements (HSFE), such as Y, Nb, Ga, Ta, U, Th, etc. and flat REE patterns showing significant negative Eu anomalies are also typical features of A-type granites. Our petrogenetic model supports progressive fractional crystallization with dominant fractionation of feldspar and a source mineral assemblage enriched in plagioclase. Biotites have distinctive compositions with high FeO/MgO ratios (7.8–61.5), F (360–5610 ppm), and Cl (120–1050 ppm). The FeO/MgO ratios together with the F and Cl content of igneous biotites seem to reflect the nature of their parental host magmas and may be useful in identifying A-type granitoids. The isotopic data (Rb–Sr and Sm–Nd) confirm that the A-type granites represent variable mixtures of asthenospheric mantle and continental crust and different mixtures lead to different subtypes of A-type granite (illustrating the lack of consensus about A-type magma origin). We conclude that prominent shear zones play an important role in providing suitable conduits for ascending asthenospheric material and heat influx in the crust, a hypothesis that is in accord with other recent work on A-type granites.     

Hydrogeochemistry of abandoned Pb sulphide mines: the mining district of La Carolina (southern Spain)

The impact of past mining activities on the quality of groundwater and surface water has been investigated in the mining district of La Carolina (southern Spain, province of Jaén), a region characterised by the presence of mineralisations of Pb–Ag, Cu and Fe sulphides and Ba sulphates. The chemistry of waters from flooded galleries, shafts and drainage adits has been compared with that of surface waters in the same area. Generally, waters present neutral pH, since carbonates neutralise the acidity produced by the oxidation of Fe-bearing sulphide minerals in the mine impacted water. Despite of this natural attenuation process, in most of the cases, the mine groundwater is of low quality and shows high dissolved SO₄ (up to 3.7 g/l), Fe and Mn contents (tens to hundreds mg/l), exceeding the limit established by the guidelines of the World Health Organization for drinking water. Generally, the surface waters are of the sulphate calcium–magnesium to magnesium types, with moderate mineralisation. Post-rebound mine waters caused degradation of receiving watercourses in which the Fe contents are usually high, with values close to 3 g/l, and the mineralisation is greater as the channels run down in the mining zone. During dry seasons a considerable increase of salts and metals dissolved in stream waters was found, due to the decreasing contributions by run-off in this semiarid region, whereas the abandoned mine discharges remained practically constant.     

Influence of hydrology on phytoplankton species composition and life strategies in a subtropical coastal lagoon periodically connected with the Atlantic Ocean

A survey was carried out to investigate the relationship of phytoplankton biovolume, structure, and species life strategies with major abiotic factors in a subtropical choked coastal lagoon (34°33′S, 54°22′W) naturally connecting with the Atlantic Ocean several times a year. Marine and limnetic influence areas were sampled on a monthly basis during two periods, one of low rainfall and high conductivity (August 1996 to February 1998) and a second period with the opposite tendency (December 1998 to March 2000). Photosynthetically active radiation availability was high and reached the bottom (>1% of the incident light), while dissolved inorganic nitrogen (0.6–18.4 μM), soluble reactive phosphorus (<0.3–2.7 μM), and reactive silica (5–386 μM) were highly variable. Life strategies were identified in the phytoplankton as a function of morphology. C-strategists, invasive planktonic and epipelic species of small size, and R-strategists, mixing-dependent species of medium size, characterized this permanently mixed system. High frequency of exchange with the ocean prevented high biomass accumulation. Phytoplankton biomass was lower in the second period of high rainfall (2.3 and 1.1 mm³ 1⁻¹ for period 1 and 2 respectively). A canonical correspondence analysis showed that conductivity, nitrogen, phosphorus, and silica were the main environmental variables explaining phytoplankton species composition patterns. During the first period, Bacillariophyceae (mostly pennate species) and the potentially toxicPrococentrum minimum were dominant; during the second period a higher contribution of flagellates (Cryptophyceae, Euglenophyceae, Prasinophyceae, and flagellates <7 μm) was found. Differences of phytoplankton biomass, main taxonomic groups, and strategies were found between periods but not between limnic and marine areas, suggesting that hydrological dynamic is more relevant than seasonal and spatial differences.     

A NOTE ON THE APPLICATION OF LINEAR WAVE THEORY AT A CRITICAL LEVEL

The purpose of this note is to estimate the accuracy and practical limitations of applying linear theory at a critical level over a realistic range of atmospheric stabilities for an idealized surface terrain. These estimates are made by comparing the results of a linear model with a nonlinear numerical model at a critical level. Essentially similar results are obtained from each model for wave stress, wave breaking height and wave dissipation through the critical level. Because gravity waves can be either evanescent or internal depending on the relative sizes of the Scorer parameter and the wavenumber of the ground surface disturbance, the somewhat paradoxical result develops that wave breaking and non-linearity increase with increasing bulk Richardson number. It is recommended that steady linear wave theory be used in gravity wave drag parameterizations provided near real time profiles of background velocity and temperature are available.     

First results on the LPO-derived seismic properties of iron ores from the Quadrilátero Ferrífero region, southeastern Brazil

The role of hydrothermal fluids in assisting the activity of strike-slip faults is investigated using a range of new geological, geophysical, and geochemical data obtained on the Argentat fault, Massif Central, France. This fault zone, 180-km-long and 6 to 8 km-width, has experienced coeval intense channeling of hydrothermal fluids and brittle deformation during a short time span (300–295 Ma). According to seismic data, the fault core is a 4-km-wide, vertical zone of high fracture density that rooted in the middle crust (~ 13 km) and that involved fluids in its deeper parts (9–13 km depth). If stress analyses in the fault core and strain analyses in the damage zone both support a left-lateral movement along the fault zone, it is inferred that hydrothermal fluids have strongly influenced fault development, and the resulting fault has influenced fluid flow. Fluid pressure made easier fracturing and faulting in zones of competent rocks units and along rheological boundaries. Repeated cycles of increase of fault-fracture permeability then overpressure of hydrothermal fluids at fault extremity favored strong and fast development of the crustal-scale strike-slip fault. The high permeability obtained along the fault zone permitted a decrease of coupling across the weak fault core. Connections between shallower and lower crustal fluids reservoirs precipitate the decrease of fault activity by quartz precipitation and sulfides deposition. The zones of intense hydrothermal alteration at shallows crustal levels and the zones of fluid overpressure at the base of the upper crust both controlled the final geometry of the crustal-scale fault zone.