A comparison of windows and maximum entropy methods for MT transfer function estimation

The ability of the Maximum Entropy Spectral Estimate (MEM) to handle magnetotelluric signals was investigated. To this end simulations of naturally occurring signals and real data were spectral analyzed both by a standard FFT technique and by MEM. The method developed for the simulation of the time series, provides accurate amplitudes and phase, and turns out to be a good test procedure for spectral analysis methods, as they apply to MT signal processing. The final estimation of the apparent resistivity was better achieved by the FFT technique. Oscillations were observed in the estimation of the apparent resistivities by MEM.     

Climatic implications of correlated Upper Pleistocene glacial and fluvial deposits on the Cinca and Gállego Rivers (NE Spain) based on OSL dating and soil stratigraphy

We correlate Upper Pleistocene glacial and fluvial deposits of the Cinca and Gállego River valleys (south central Pyrenees and Ebro basin, Spain) using geomorphic position, luminescence dates, and time-related trends in soil development. The ages obtained from glacial deposits indicate glacial periods at 85 ± 5 ka, 64 ± 11 ka, and 36 ± 3 ka (from glacial till) and 20 ± 3 ka (from loess). The fluvial drainage system, fed by glaciers in the headwaters, developed extensive terrace systems in the Cinca River valley at 178 ± 21 ka, 97 ± 16 ka, 61 ± 4 ka, 47 ± 4 ka, and 11 ± 1 ka, and in the Gállego River valley at 151 ± 11 ka, 68 ± 7 ka, and 45 ± 3 ka. The times of maximum geomorphic activity related to cold phases coincide with Late Pleistocene marine isotope stages and Heinrich events. The maximum extent of glaciers during the last glacial occurred at 64 ± 11 ka, and the terraces correlated with this glacial phase are the most extensive in both the Cinca (61 ± 4 ka) and Gállego (68 ± 7 ka) valleys, indicating a strong increase in fluvial discharge and availability of sediments related to the transition to deglaciation. The global Last Glacial Maximum is scarcely represented in the south central Pyrenees owing to dominantly dry conditions at that time. Precipitation must be controlled by the position of the Iberian Peninsula with respect to the North Atlantic atmospheric circulation system. The glacial systems and the associated fluvial dynamic seem sensitive to 1) global climate changes controlled by insolation, 2) North Atlantic thermohaline circulation influenced by freshwater pulses into the North Atlantic, and 3) anomalies in atmospheric circulation in the North Atlantic controlling precipitation on the Iberian Peninsula. Our scenario of glacial and fluvial evolution during the Late Pleistocene in northern Spain could be extrapolated to other glaciated mountainous areas in southern Europe.     

The scope for generating bio-oils with relatively low oxygen contents via hydropyrolysis

The primary oils obtained in high yields from fast (fluidised-bed) pyrolysis of biomass generally have high oxygen contents (ca. 40% w/w). The scope for using pyrolysis under hydrogen pressure (hydropyrolysis), to give oils with much lower oxygen contents compared to normal pyrolysis has been investigated. Fixed-bed hydropyrolysis tests have been conducted on cellulose, sugar cane bagasse and eucalyptus wood using hydrogen pressures up to 10 MPa, with heating rates of 5 and 300°C min⁻¹. A colloidal FeS catalyst was used in some tests (Fe loading of 5%, w/w) to increase overall conversions. Further, the attractive option of using a two-stage reactor in which the primary oil vapors are passed though a bed of hydrotreating catalyst is also described. Raising the hydrogen pressure from atmospheric to 10 MPa reduced the oxygen content of the primary oil by over 10% to below 20% w/w. The addition of a dispersed iron sulphide catalyst gave conversions close to 100% for all three biomass samples investigated at 10 MPa under conditions in the fixed-bed reactor where significant diffusional resistances existed and reduced the oxygen content of the bio-oil by a further 10%. Although NMR indicated that the oils became increasingly aromatic as more oxygen was removed, the increase in hydrogen pressure decreased the extent of overall aromatisation that occurs primarily due to the lower char yields obtained. In two-stage tests for cellulose, using a commercial sulphided Ni/Mo γ-Al₂O₃ catalyst at 400°C, increasing the hydrogen pressure from 2.5 to 10 MPa decreased the oxygen content of the oil by over 20% to 10% w/w. The H/C ratios were higher and O/C ratios smaller for the two-stage bio-oils compared to their single stage counterparts. However, the differences in the O/C ratios between the single and two-stage bio-oils increase with pressure.     

Crustal and mantle strengths in continental lithosphere: is the jelly sandwich model obsolete?

The relative importance of the contribution of the lower crust and of the lithospheric mantle to the total strength of the continental lithosphere is assessed systematically for realistic ranges of layer thickness, composition, and temperature. Results are presented as relative strength maps, giving the ratio of the lower crust to upper mantle contribution in terms of crustal thickness and surface heat flow. The lithosphere shows a “jelly sandwich” rheological layering for low surface heat flow, thin to average crustal thickness, and felsic or wet mafic lower crustal compositions. On the other hand, most of the total strength resides in the seismogenic crust in regions of high surface heat flow, crust of any thickness, and dry mafic lower crustal composition.     

The Tandilia System of Argentina as a southern extension of the R��o de la Plata craton: an overview

The southernmost outcrops of the Río de la Plata cratonic region are exposed in the Tandilia System in eastern Argentina. The geological evolution comprises mainly an igneous-metamorphic Paleoproterozoic basement named Buenos Aires Complex, which is covered by Neoproterozoic to Early Paleozoic sedimentary units which display subhorizontal bedding. The basement of calc-alkaline signature consists mainly of granitic-tonalitic gneisses, migmatites, amphibolites, some ultramafic rocks, and granitoid plutons. Subordinate rock-types include schists, marbles, and dykes of acid and mafic composition. Tandilia was recognized as an important shear belt district with mylonite rocks derived mainly from granitoids. The tectonic scenario seems related to juvenile accretion event (2.25?C2.12?Ga) along an active continental margin, followed by continental collision (2.1?C2.08?Ga) after U?CPb zircon data. The collisional tectonic setting caused thrusting and transcurrent faulting favouring the anatexis of the crustal rocks. The tholeiitic dykes constrain the time of crustal extension associated with the last stages of the belt evolution. The basement was preserved from younger orogenies such as those of the Brasiliano cycle. After a long paleoweathering process, the Sierras Bayas Group (c. 185?m thick) represents a record of the first Neoproterozoic sedimentary unit (siliciclastic, dolostones, shales, limestones), superposed by Cerro Negro Formation (c. 150?C400?m thick, siliciclastics) assigned to Upper Neoproterozoic age. The final sedimentary transgression during Early Paleozoic was the Balcarce Formation (c. 90?C450?m thick) deposited over all the mentioned Precambrian units. Based on all the geological background, a tectonic evolution is offered.     

Are the Venezuelan fault systems part of the southern Caribbean plate boundary?

Three major fault systems have been recognized in Venezuela: the Oca, Boconó, and El Pilar fault zones. The Boconó-El Pilar system is an active, Late Pleistocene-Holocene fault system, which extends for over 1300 km between the Venezuela-Colombia border, through the Venezuelan Andes and along the northern Venezuelan coast, to the east of Trinidad. Recent tectonic evidence suggests that until the Late Tertiary or Early Quaternary, the Caribbean Plate-South America Plate boundary included the El Pilar and Oca fault systems. Since then, it has included the Boconó fault system. Right-lateral offset along these fault systems is not sufficient to derive the Caribbean Plate from Pacific crust; alternatively, the Caribbean Plate may have been a part of the South America Plate until comparatively recent geologic-time.

---

Zusammenfassung Drei wichtige Bruchsysteme sind in Venezuela festgestellt worden: die Oca, Boconé und El Pilar Bruchzonen. Das Boconó-El-Pilar-System ist ein aktives, Spätpleistozänes-Holozänes System, daß sich über mehr als 1300 km erstreckt, von der venezolanischkolumbianischen Grenze, durch die venezolanischen Anden und längs der nördlichen venezolanischen Küste, bis östlich von Trinidad. Rezente tektonische Daten lassen andeuten, daß bis zum Spättertiär oder Frühquartär, die Grenze zwischen der Karibischen Platte und der Südamerika-Platte die El Pilar- und Oca-Bruchsysteme einschloß. Später hat sie das Boconó-Bruchsystem eingeschlossen. Rechtsinnige Blattverschiebung an diesen Bruchsystemen ist nicht groß genug, um die Karibische Platte als ein Stück pazifischer Kruste zu betrachten; oder aber, die Karibische Platte war mit der Südamerika-Platte vereinigt bis zu einem relativ jungen geologischen Alter.

---

Resumen Se han establecido tres sistemas mayores de fallamiento en Venezuela: las zonas de falla de Oca, Boconó y El Pilar. El sistema de Boconó-El Pilar es un sistema de falla activo pleistoceno-holoceno, el cual se extiende por más de 1300 km entre la frontera colombo-venezolana, a traves de los Andes venezolanos y a lo largo de la costa norte de Venezuela, hasta más al este de Trinidad. Evidencias tectónicas recientes sugieren que hasta el Terciario Tardio o Cuatemario Temprano, el límite entre las Plaças del Caribe y de América del Sur incluía los sistemas de falla de Oca y El Pilar. Desde entonces incluye al sistema de falla de Boconó. El desplazamiento de rumbo hacia la derecha a lo largo de estos sistemas de fallamiento no es suficiente para derivar la Plaça del Caribe de la corteza pacifica; alternativamente, la Placa del Caribe puede haber sido parte de la Placa de América del Sur hasta una época geológica relativamente reciente.

---

: , ' El Pilar. - / , 1300 - , . , 1 Pilar. '. , , , , , .

---

---

Dedicated to the memory of John D. Weaver.     

A Cambrian mixed carbonate–siliciclastic platform in SW Gondwana: evidence from the Western Sierras Pampeanas (Argentina) and implications for the early Paleozoic paleogeography of the proto-Andean margin

International Journal of Earth Sciences - The Western Sierras Pampeanas (WSP) of Argentina record a protracted geological history from the Mesoproterozoic assembly of the Rodinia supercontinent to...     

Improving the Elevation Accuracy of Digital Elevation Models: A Comparison of Some Error Detection Procedures

The widespread availability of powerful desktop computers, easy‐to‐use software tools and geographic datasets have raised the quality problem of input data to be a crucial one. Even though accuracy has been a concern in every serious application, there are no general tools for its improvement. Some particular ones exist, however, and some results are presented here for a particular case of quantitative raster data: Digital Elevation Models (DEM). Two procedures designed to detect anomalous values (also named gross errors, outliers or blunders) in DEMs, but valid also for other quantitative raster datasets, were tested. A DEM with elevations varying from 181 to 1044 m derived from SPOT data has been used as a contaminated sample, while a manually derived DEM obtained from aerial photogrammetry was regarded as the ground truth to allow a direct performance comparison for the methods with real errors. It is assumed that a “better” value can be measured or obtained through some methodology once an outlier location is suggested. The options are different depending upon the user (DEM producers might go to the original data and make another reading, while end users might use interpolation). Both choices were considered in this experiment. Preliminary results show that for the available dataset, the accuracy might be improved to some extent with very little effort. Effort is defined here as the percentage of points suggested by the methodology in relation with its total number: thus 100 per cent effort implies that all points have been checked. The method proposed by López (1997) gave poor results, because it has been designed for errors with low spatial autocorrelation (which is not the case here). A modified version was then designed and compared with the method proposed by Felicísimo (1994). The three procedures can be applied both for error detection during DEM generation and by end users, and they might be of use for other quantitative raster data. The choice of the best methodology is different depending on the effort involved. The conclusions have been derived for a photogrammetrically obtained DEM; other production procedures might lead to different results.     

Flexural and gravity modelling of the Mérida Andes and Barinas–Apure Basin, Western Venezuela

The kinematic evolution of the Barinas–Apure Basin and the southern Mérida Andes from Lower Miocene to the Present is numerically modelled using flexural isostatic theory and geophysical and geological data. Two published regional transects are used to build up a reference section, which is then used to constrain important parameters (e.g. shortenings and sedimentary thicknesses) for the flexural modelling. To control the location of the main fault system in the flexural model earthquake information is also used. The estimated flexural elastic thickness of the South American lithosphere beneath the Barinas–Apure Basin and the Mérida Andes Range is 25 km. The value for the final total shortening is 60 km. The flexural isostatic model shows that the Andean uplift has caused the South American lithosphere subsidence and the development of the Barinas–Apure Basin.In addition, gravity modelling was used to understand deep crustal features that could not be predicted by flexural theory. Consequently, the best-fit flexural model is used to build a gravity model across the Mérida Andes and the Barinas–Apure Basin preserving the best-controlled structural features from the flexural modelling (e.g. basin wavelength and depth) and slightly changing the main bodies density values and deep crustal structures. The final gravity model is intended to be representative of the major features affecting the gravity field in the study area. The predicted morphology in the lower crustal level of the final gravity model favours the hypothesis of a present delamination or megathrust of the Maracaibo crust over the South American Shield. This process would use the Conrad discontinuity as a main detachment surface within an incipient NW dipping continental subduction.