The Mid-atlantic Ridge (31°S–34°30′S): Temporal and spatial variations of accretionary processes

The ridge located between 31° S and 34°30′S is spreading at a rate of 35 mm yr⁻¹, a transitional velocity between the very slow (≤20 mm yr⁻¹) opening rates of the North Atlantic and Southwest Indian Oceans, and the intermediate rates (60 mm yr⁻¹) of the northern limb of the East Pacific Rise, and the Galapagos and Juan de Fuca Ridges. A synthesis of multi-narrow beam, magnetics and gravity data document that in this area the ridge represents a dynamically evolving system. Here the ridge is partitioned into an ensemble of six distinct segments of variable lengths (12 to 100 km) by two transform faults (first-order discontinuities) and three small offset (< 30 km) discontinuities (second-order discontinuities) that behave non-rigidly creating complex and heterogeneous morphotectonic patterns that are not parallel to flow lines. The offset magnitudes of both the first and second-order discontinuities change in response to differential asymmetric spreading. In addition, along the fossil trace of second-order discontinuities, the lengths of abyssal hills located to either side of a discordant zone are observed to lengthen and shorten creating a saw-toothed pattern. Although the spreading rate remains the same along the length of the ridge studied, the morphology of the spreading segments varies from a deep median valley with characteristics analogous to the rift segments of the North Atlantic to a gently rifted axial bulge that is indistinguishable from the shape and relief of the intermediate rate spreading centers of the East Pacific Rise (i.e., 21°N). Like other carefully surveyed ridge segments at slow and fast rates of accretion, the along-axis profiles of each ridge segment are distinctly convex upwards, and exhibit along-strike changes in relief of 500m to 1500 between the shallowest portion of the segment (approximate center) and the segment ends. Such spatial variations create marked along-axis changes in the morphology and relief of each segment. A relatively low mantle Bouguer anomaly is known to be associated with the ridge segment characterized by a gently rifted axial bulge and is interpreted to indicate the presence of focused mantle upwelling (Kuo and Forsyth, 1988). Moreover, the terrain at the ends of each segment are known to be highly magnetized compared to the centers of each segment (Carbotte et al, 1990). Taken together, these data clearly establish that these profound spatial variations in ridge segment properties between adjoining segments, and along and across each segment, indicate that the upper mantle processes responsible for the formation of this contrasting architecture are not solely related to passive upwelling of the asthenosphere beneath the ridge axis. Rather, there must be differences in the thermal and mechanical structure of the crust and upper mantle between and along the ridge segments to explain these spatial variations in axial topography, crustal structure and magnetization. These results are consistent with the results of investigations from other parts of the ridge and suggest that the emplacement of magma is highly focused along segments and positioned beneath the depth minimum of a given segment. The profound differences between segments indicate that the processes governing the behavior of upwelling mantle are decoupled and the variations in the patterns of axis flanking morphology and rate of accretion indicate that processes controlling upwelling and melt production vary markedly in time as well. At this spreading rate and in this area, the accretionary processes are clearly three-dimensional. In addition, the morphology of a ridge segment is not governed so much by opening rate as by the thermal structure of the mantle which underlies the segment.     

Multipole expansions for wave diffraction and radiation in deep water

A multipole expansion of the velocity potential is described for two- and three-dimensional wave diffraction and radiation problems. The velocity potential is expressed in terms of a series of multipole potentials. The wave terms and the local disturbance terms are represented by separated multipole potentials. Floating bodies and submerged bodies are treated in the same way. This approach differs from that of some other authors, who considered floating bodies and submerged bodies separately and derived entirely different multipoles. Semi-analytical solutions for a circular cylinder in two-dimensional motions are given. It is found that the local disturbance decays rapidly and steadily. The general application of the multipole expansion to arbitrary geometries is also presented, based on a method coupling multipoles to a boundary integral expression. Numerical results for several floating and submerged cylinders are presented.     

A comparative study of some directional sea models

Current specification of the ocean wave environment for the design of offshore platforms does not adequately describe the directional nature of a real seaway. The strong wave frequency dependent nature of the directional behavior of observed seas is often over-simplified for design. A general formulation encompassing a wide range of directional sea models is presented. Parameter values used in some of the more popular directional sea models are examined. Approximate expressions for the two frequency dependent parameters in a modified Longuet-Higgins cosine wave spreading model are presented. A general procedure which allows an engineer to estimate parameters for alternate wave spreading models is discussed. To illustrate this procedure an empirically based modified cosine spreading model is used as the basis to estimate frequency dependent parameters for circular normal and wrapped Gaussian wave spreading models. A comparison of the contours of the various directional sea models and the prediction of the root-mean-square velocity distribution is presented.     

Miocene extensional detachments in the outcropping basement of the northern Alboran Basin (Betics) and their tectonic implications

Whether or not there are extensional detachment faults in the Alboran basement can be tested directly because a part of the Alboran Basin is now emerged. These detachments, related to crustal thinning beneath the Alboran Basin, occurred from the Aquitanian to Tortonian. The resulting extensional geometries can be described in general terms. During the Serravalian a considerable southwest extension of the basin took place, accompanied by south-southeast extension in the northern Gibraltar Arc. Other detachments affected by Serravalian extension can be found. The spreading of the Alboran was nearly coeval with roughly westward migration of the Gibraltar mountain front.     

Alboran Sea late cenozoic tectonic and stratigraphic evolution

Analysis of airgun seismic profiles from the Alboran Sea reveals a complex morphostructure with margins, basins, and structural highs. North of the Alboran Ridge, south-facing margins have a passive style of evolution, with thick progradational sequences of post-Messinian deposits, whereas north-facing margins are tectonized along structural highs with reduced sediment cover. Basins are extensional features developed since the Early Miocene by mechanisms of tectonic escape and pull-apart, under generalized northwest-southeast to north-south compression. Depositional sequences in this semi-land-locked sea were controlled by the local tectonism and influenced by global sea-level oscillations.     

Well log interpretation and seismic character of the cenozoic sequence in the northern Alboran Sea

Seismic stratigraphic and main lithological features of the sedimentary cover overlying the basement of the Alboran Sea were established via the analysis of commercial multichannel seismic surveys, geophysical well logs, and well data. Six seismic stratigraphics units (VI to I), bounded by unconformities, form the marine sediments that range in age from early Miocene to Quaternary. They are dated by extrapolation of commercial drilling results from the northern Alboran Sea. Volcanic activity is recorded within sedimentary sequences of units V to II. Undercompaction features are detected in the two basal units.     

Particulate flux in the water column overlying Santa Monica Basin

Fluxes of particulate carbon, nitrogen, phytoplankton pigments, biogenic silica and dry mass were measured using free-floating and moored sediment trap arrays in the Santa Monica Basin during the period from October 1985 to August 1990 as part of the California Basin Study (CaBS) Program. In field testing for potential sources of sediment trap biases, we found little significant or consistent difference in rate estimates between short-term drifting traps and long-term moored traps, between preserved and unpreserved traps in short-term experiments, between different preservatives (mercury or formalin) in long-term experiments, between different designs of small cylindrical traps, and between deep-moored cylindrical traps and large conical traps. We did, however, find that sediment trap samples collected and analyzed on 0.45 μm silver filters gave estimates of carbon and nitrogen fluxes about 25% higher than samples collected on GF/F glass-fiber filters. Concurrent trap deployments at two stations 18km apart revealed low mesoscale variability in flux estimates. Seasonal patterns in carbon and nitrogen flux were not evident in our data, but strong seasonality, with spring maxima and summer minima, were observed for fluxes of phaeopigments and biogenic silica out of the euphotic zone.Time-averaged rates of particulate flux for long-term trap deployments from January to August 1990, were 121, 18.8, 1.5, 67 and 633mg m⁻²d⁻¹ at 110–135m for carbon, nitrogen, phaeopigment, biogenic silica and mass, respectively. Flux estimates to the basin floor (835–860m) were 50, 6.5, 0.64, 41.6 and 575mg m⁻²d⁻¹ for the same parameters. The former estimates are constrained by and in good agreement with independent assessments of new production from nitrate uptake in the euphotic zone. The latter agree with rates previously inferred from the sedimentary record using ²¹⁰Pb as a tracer. In addition, the difference in carbon estimates in the water column between the euphotic zone and the basin floor is consistent with the requirements for bacterial growth and metabolism at intermediate depths as measured by the thymidine method.     

The depletion of oil

The trend of previous estimates of the world's ultimate recovery of oil suggests a figure of 1650 BBO, of which 1438 BBO have been discovered and 978 BBO remain to be produced. Some large reported reserve figures are questioned. Importance is attached to the mid-point of depletion when rising production tends to give way to decline. The share of the world's supply coming from six Middle East countries is set to continue to rise from its 1986 low of 16% to as much as 50% by 2010, with the likely consequence of higher oil prices and serious political implications. The world is rapidly approaching a turning point when it has to face the consequences of an irreversible decline in oil production.