The center-to-limb variations of four Ca i lines in the photospheric spectrum at λ6500

We study the center-limb (CL) variation of the average profiles of four Ca i lines near 6500 and compare these observations with synthetic data obtained from several line formation models having different thermal structures, line parameters, LTE and non-LTE conditions, and micro and macroturbulence values, to assess the formation characteristics of our Ca i lines in the solar photosphere.Comparison of numerical results with observations indicates that non-LTE is indispensable to fit the CL variation of the central residual intensity for the line 6493, and anisotropic microturbulence is indispensable to improve the CL behavior of the equivalent widths for all lines. The Ca i line analysis favors a cool photospheric model, but this cannot be disentangled clearly from the effects of non-LTE and small-scale velocity fields on the grounds of the present line formation models.     

The thermal continuum in coronal loops: The influence of finite resistivity on the continuous spectrum

The normal mode spectrum for the linearized MHD equations is investigated for a cylindrical equilibrium. This spectrum is examined for zero perpendicular thermal conduction, with both zero and non-zero scalar resistivity. Particular attention is paid to the continuous branches of this spectrum, or continuous spectra. For zero resistivity there are three types of continuous spectra present, namely the Alfvén, slow, and thermal continua. It is shown that when dissipation due to resistivity is included, the slow and Alfvén continua are removed and that the thermal continuum is shifted to a different position (where the shift is independent of the exact value of resistivity). The old location of the thermal continuum is covered by a dense set of nearly singular discrete modes called a quasi-continuum. The quasi-continuum is investigated numerically, and the eigenfunctions are shown to have rapid spatial oscillating behaviour. These oscillations are confined to the most unstable part of the equilibrium based on the Field criterion, and may be the cause of fine structure in prominences.     

Hall effects on heat and mass transfer flow with variable suction and heat generation

A study of the combined buoyancy effects of thermal and mass diffusion on MHD convection flow in the presence of Hall currents with variable suction and heat generation has been carried out. Analytical expressions for the velocity and the temperature of the fluid are given. The effects of Hall currents, parameterm, and heat source parameter on the velocity are discussed.     

Quiet-Sun emission and local sources at meter and decimeter wavelengths and their relationship with the coronal neutral sheet

We analysed multifrequency 2-dimensional maps of the solar corona obtained with the Nançay radioheliograph during two solar rotations in 1986. We discuss the emission of the quiet Sun, coronal holes and local sources and its association with chromospheric and coronal features as well as with large-scale magnetic fields. The brightness temperature of the quiet Sun was 5 to 5.5 × 10⁵ K at 164 MHz and 4.5 to 5 × 10⁵ K at 408 MHz. A coronal hole, also detected in the 10830 Å He i line, had a brightness temperature of 4.5 × 10⁵ at 164 and 2.5 × 10⁵ at 408 MHz. We give statistics of source brightness temperatures (on the average 8% above the background at 164 MHz and 14% at 408 MHz), as well as distributions in longitude and latitude. Although we found no significant center-to-limb effect in the brightness temperature, the sources were not visible far from the central meridian (apparently a refraction effect). The brightest sources at 164 MHz were near, but not directly above active regions and had characteristics of faint type I continua. At 408 MHz some sources were observed directly above active regions and one was unambiguously a type I continuum. The majority of the fainter sources showed no association with chromospheric features seen on H synoptic charts, including filaments. Most of them were detected at one frequency only. Sources identified at three frequencies (164, 327, and 408 MHz) were located in regions of enhanced large-scale magnetic field, some of them at the same location as decayed active regions visible one rotation before on synoptic H charts. Multifrequency sources are associated with maxima of the green line corona. The comparison with K-corona synoptic charts shows a striking association of the radio sources with dense coronal regions, associated with the coronal neutral sheet. Furthermore, we detected an enhanced brightness region which surrounds the local sources and is stable over at least one solar rotation. We call this feature a coronal plateau and we identify it with the radio counterpart of the coronal neutral sheet.     

Review of resource analysis and related studies: Working group,Mathematical Geology,freie Universität Berlin

The working group Mathematical Geology of the Freie Universität Berlin was formed in 1971. We review quantitative methods used by the working group since 1983 to treat mineral exploration problems. The methods applied vary from elementary statistical analysis of multivariate exploration data to optimal strategies for selecting favorable targets, and from multiobjective decision-making for additional drill hole locations to expert systems in exploration.The methods applied are directly related to the level of information at each stage of the exploration process. Special emphasis was placed on the relationship between and evaluation of subjective and objective data. Case studies illustrating the various methods are presented for different kinds of mineral deposits and exploration environments.     

Applications of AnnAGNPS model for soil loss estimation and nutrient loading for Malaysian conditions

The study evaluated the performance and suitability of AnnAGNPS model in assessing runoff, sediment loading and nutrient loading under Malaysian conditions. The watershed of River Kuala Tasik in Malaysia, a combination of two sub-watersheds, was selected as the area of study. The data for the year 2004 was used to calibrate the model and the data for the year 2005 was used for validation purposes. Several input parameters were computed using methods suggested by other researchers and studies carried out in Malaysia. The study shows that runoff was predicted well with an overall R² value of 0.90 and E value of 0.70. Sediment loading was able to produce a moderate result of R² = 0.66 and E = 0.49, nitrogen loading predictions were slightly better with R² = 0.68 and E = 0.53, and phosphorus loading performance was slightly poor with an R² = 0.63 and E = 0.33. The erosion map developed was in agreement with the erosion risk map produced by the Department of Agriculture, Malaysia. Rubber estates and urban areas were found to be the main contributors to soil erosion. The simulation results showed that AnnAGNPS has the potential to be used as a valuable tool for planning and management of watersheds under Malaysian conditions.     

Application of remote sensing technology for Impact Assessment of Watershed Development Programme

The current study was taken up to investigate the utility of remote sensing and GIS tools for evaluation of Integrated Wasteland Development Programme (IWDP) implemented during 1997–2001 in Katangidda Nala watershed, Chincholi taluk, Gulbarga district, Karnataka. The study was carried out using IRS 1C, LISS III data of December 11, 1997 (pre-treatment) and November 15, 2002 (post-treatment) covering the watershed to assess the changes in land use / land cover and biomass that have changed over a period of five years (1997–2002). The images were classified into different land use/land cover categories using supervised classification by maximum likelihood algorithm. They were also classified into different biomass levels using Normalized Difference Vegetation Index (NDVI) approach. The results indicated that the area under agriculture crops and forest land were increased by 671 ha (5.7%) and 1,414 ha (11.94%) respectively. This is due to the fact that parts of wastelands and fallow lands were brought into cultivation. This increase in the area may be attributed to better utilization of surface and ground waters, adoption of soil and water conservation practices and changes in cropping pattern. The area under waste lands and fallow lands decreased by 1,667 ha (14.07%) and 467 ha (3.94%), respectively. The vegetation vigour of the area was classified into three classes using NDVI. Substantial increase in the area under high and low biomass levels was observed (502 ha and 19 ha respectively). The benefit-cost analysis indicates that the use of remote sensing and GIS was 2.2 times cheaper than the conventional methods. Thus, the repetitive coverage of the satellite data provides an excellent opportunity to monitor the land resources and evaluate the land cover changes through comparison of images for the watershed at different periods.     

Urban cadastral mapping using very high resolution remote sensing data

With growing urban expanses, one of the pre-requisites for effective governance is Urban Information Systems (UIS) with content down to individual properties (and individuals). The basic input i.e., a map, in UIS should show individual property boundaries showing the plan outline of all structures existing within, at a scale of 1:1000 and larger with sub-metre to centimeters planimetric and geometric accuracy. With very high resolution remote sensing data of the order of 1m available in hand, it is possible to prepare maps with high resolution spatial content. The present exercise demonstrates a method of preparing a geometrically and planimetrically accurate urban cadastral map on very large scale for a small area of about 5 sq km. IKONOS merged data with 1m resolution is used for the purpose. Mapping was done in conjunction with on-site measurements and sketches. Guides are used to maintain shape symmetry and accuracy of buildings and other features. Working out cost of mapping per unit area is another objective in the present exercise. For want of fully or semi-automatic methods of information extraction from very high resolution remote sensing data, it is imperative that mapping should be carried out in conjunction with some on-site measurements wherever necessary.     

Mapping of suspended sediments using site specific seasonal algorithms

This article reports a preliminary work in which two site specific seasonal algorithms have been proposed for estimating the suspended sediments concentration (SSC) from the digital numbers recorded on Indian Remote sensing Satellite, IRS-P4 Ocean Colour Monitor (OCM) sensor. For estimation of SSC, the proposed algorithms utilize dark pixel deduction atmospheric correction technique. The computations are performed with respect to north east monsoon phase situations of Palk Strait coastal stretch. The algorithms performance was satisfactory during the north east monsoon period. Although the results obtained cannot be generalized, we suggest that the authority of proposed algorithms can be extended to other seasons with the addition of more temporal experimental validation data sets and with numeric constants adjusted to present existing conditions. (As this area was severely affected by Tsunami, it may have dissimilar conditions at present).     

The ionospheric eclipse factor method (IEFM) and its application to determining the ionospheric delay for GPS

A new method for modeling the ionospheric delay using global positioning system (GPS) data is proposed, called the ionospheric eclipse factor method (IEFM). It is based on establishing a concept referred to as the ionospheric eclipse factor (IEF) λ of the ionospheric pierce point (IPP) and the IEF’s influence factor (IFF) . The IEF can be used to make a relatively precise distinction between ionospheric daytime and nighttime, whereas the IFF is advantageous for describing the IEF’s variations with day, month, season and year, associated with seasonal variations of total electron content (TEC) of the ionosphere. By combining λ and with the local time t of IPP, the IEFM has the ability to precisely distinguish between ionospheric daytime and nighttime, as well as efficiently combine them during different seasons or months over a year at the IPP. The IEFM-based ionospheric delay estimates are validated by combining an absolute positioning mode with several ionospheric delay correction models or algorithms, using GPS data at an international Global Navigation Satellite System (GNSS) service (IGS) station (WTZR). Our results indicate that the IEFM may further improve ionospheric delay modeling using GPS data.