Trace metals in selected organisms from the Adriatic sea

Extensive surveys were made to establish the concentrations of several metals (Zn, Cd, Pb, Cu and Hg) in various marine organisms from different parts of the Adriatic Sea in the period from 1979 to 1985. The results obtained are based on analyses which were performed in conjunction with carefully tested procedures. Proper sampling, sample storage, treatment of samples and final analytical determination has excluded artefacts which would influence the accuracy, or cause contamination and/or trace metal losses.The metal concentrations in shellfish from the coastal areas of the Adriatic Sea are in the range of the lowest values obtained for similar organisms from other localities throughout the Mediterranean Sea. Special attention has been paid to the anthropogenic influence on trace metal concentrations in organisms living in the vicinity of domestic sewage and/or industrial waste-water outflows.     

海带的一个自然突变型

在多细胞藻的遗传学研究中,被发现的突变型很少[1].绿藻中有一些突变型,其中较多的是某种石莼(Ulva mutabilis)[2].三浦昭雄等在紫菜中发现突变型.在褐藻中未见有突变型的报道.这里所报道的是海带(Laminaria japonica)的一个突变型.     

Geotechnical aspects of fine-grained mass flow deposits: California Continental Borderland

Seismic reflection profiling demonstrates the importance of mass movement in the north-central California Borderland. Bulk properties of surficial hemipelagic sediments in the Santa Barbara, Santa Cruz, and San Nicolas basins show that different types of mass-transported sediments have different properties, although their general sedimentologic characteristics are very similar. Slump deposits have moderate water contents (48% wet weight basis), high plasticity indices (46%), and moderate activities (1.6). For debris flows these values are low: 28%, 5%, and 0.3, respectively, and for other types (liquefied flow, mudflows, and turbidities) the values are high: 54 to 63%, 49 to 58%, and 1.2 to 1.5, respectively.     

Sea-structure interaction for tripod-type steel gravity platform

The paper deals with a numerical integrated procedure to calculate the effects of the interaction between sea waves and a tripod-type steel gravity platform. The main aspects to be taken into account for a reliable wave loading analysis of such a new type of platform are emphasized. Among them, the field perturbation effect due to the large bodies presence is analysed. Finally, some principal results in terms of structure global loads obtained by the numerical integrated procedure are presented.     

Waveform Shaping of Sonar Transducers for Improving the Vertical Resolution in Sub-bottom Sediments Profiling

Vertical resolution is of fundamental importance in sonar exploration and is directly related to the duration of the acoustic pulse generated by the transducer. The shorter the radiated pulse, the higher the vertical resolution. Many sub-bottom profiling sonar systems use piezoelectric transducers because they are reversible and well understood. Piezoelectric projectors are normally resonant transducers, which are intrinsically narrowband. A piezoelectric transducer is usually driven by a tone-burst. However, it is possible to use Fourier techniques to find a pre-compensated electrical driving function so that the transducer radiates a prescribed wider band acoustic waveform. This technique can be applied to synthesize zero-phase cosine-magnitude, Gaussian, and bionic pulses, with a conventional sandwich transducer. Zero-phase cosine-magnitude waveforms provide minimum length pulses (and therefore maximum resolution) within a prescribed frequency band.The aim of this paper is to illustrate the synthesis of wideband acoustic pulses using an underwater piezoelectric projector. The conventional acoustic waveform radiated when a Tonpiltz transducer is transiently excited using a “click” and allows its frequency response function to be measured. This function is used to design the electrical signal which then drives the transducer so that it radiates the shortest pulse compatible with its mechanical response. The significant resolution enhancement of the waveform shaping process is illustrated by its application to a sediment wedge model.     

Simulation of green water flow on deck using non-linear dam breaking theory

Experiments carried out with models of floating production, storage and offloading platforms (FPSOs) showed that the flow of water over the deck edge, onto the deck resembled a suddenly released wall of water rather than a breaking wave. Therefore green water flow onto the deck was simulated using dam breaking theory, but the theory’s shallow-water assumptions may be limiting. In this paper a non-linear dam breaking problem is formulated. Equations of motion in the Lagrangian form are used and the solution is sought as an infinite series in time. Comparisons with the shallow water approximation are carried out.     

Robust adaptive control of underactuated ships on a linear course with comfort

This paper addresses an important problem in ship control application—the robust stabilization of underactuated ships on a linear course with comfort. Specifically, we develop a multivariable controller to stabilize ocean surface ships without a sway actuator on a linear course and to reduce roll and pitch simultaneously. The controller adapts to unknown parameters of the ship and constant environmental disturbances induced by wave, ocean current and wind. It is also robust to time-varying environmental disturbances, time-varying change in ship parameters and other motions of the ship such as surge and heave. The roll and pitch can be made arbitrarily small while the heading angle and sway are kept to be in reasonably small bounds. The controller development is based on Lyapunov’s direct method and backstepping technique. A Lipschitz continuous projection algorithm is used to update the estimate of the unknown parameters to avoid the parameters’ drift due to time-varying environmental disturbances. Simulations on a full-scale catamaran illustrate the effectiveness of our proposed controller.     

A nitrate and silicate budget in the equatorial Pacific Ocean: a coupled physical–biological model study

A coupled physical–biological model was developed to simulate the low-silicate, high-nitrate, and low-chlorophyll (LSHNLC) conditions in the equatorial Pacific Ocean and used to compute a detailed budget in the Wyrtki box (5°N–5°S, 180–90°W) for the major sources and cycling of nitrogen and silicon in the equatorial Pacific. With the incorporation of biogenic silicon dissolution, NH₄ regeneration from organic nitrogen and nitrification of ammonia in the model, we show that silicon recycling in the upper ocean is less efficient than nitrogen. As the major source of nutrients to the equatorial Pacific, the Equatorial Undercurrent provides slightly less Si(OH)₄ than NO₃ to the upwelling zone, which is defined as 2.5°N–2.5°S. As a result, the equatorial upwelling supplies less Si(OH)₄ than NO₃ into the euphotic zone in the Wyrtki box, having a Si/N supply ratio of about 0.85 (2.5 vs. 2.96 mmolm⁻² day⁻¹). More Si(OH)₄ than NO₃ is taken up with a Si/N ratio of 1.17 (2.72 vs. 2.33 mmolm⁻² day⁻¹) within the euphotic zone. The difference between upwelling supply and biological uptake is balanced by nutrient regeneration and horizontal advection. Excluding regeneration, the net silicate and nitrate uptakes are nearly equal (1.76 vs. 1.84 mmolm⁻² day⁻¹). However, biogenic silica export production is slightly higher than organic nitrogen (1.74 vs. 1.59 mmolm⁻² day⁻¹) following a 1.1 Si/N ratio. In the central equatorial Pacific, low silicate concentrations limit diatom growth; therefore non-diatom new production accounts for most of the new production. Higher silicate supply in the east maintains elevated diatom growth rates and new production associated with diatoms dominate upwelling zone. In contrast, the new production associated with small phytoplankton is nearly constant or decreases eastward along the equator. The total new production has a higher rate in the east than in the west, following the pattern of surface silicate. This suggests that silicate regulates the diatom production, total new production, and thereby carbon cycle in this area. The modeled mean primary production is 48.4 mmolCm⁻² day⁻¹, representing the lower end of direct field measurements, while new production is 15.0 mmolCm⁻² day⁻¹, which compares well with previous estimates.     

Modeling bed-load transport of coarse sediments in the Great Bay Estuary, New Hampshire

Current, sea level and bed-load transport are investigated in the Lower Piscataqua River section of the Great Bay Estuary, New Hampshire, USA—a well-mixed and geometrically complex system with low freshwater input, having main channel tidal currents ranging between 0.5 and 2 m s⁻¹. Current and sea level forced by the M₂M₄M₆ tides at the estuarine mouth are simulated by a vertically averaged, non-linear, time-stepping finite element model. The hydrodynamic model uses a fixed boundary computational domain and accounts for flooding–drying of tidal flats by making use of a groundwater component. Inertia terms are neglected in comparison with pressure gradient and bottom friction terms, which is consistent with the observed principal dynamic balance for this section of the system. The accuracy of hydrodynamic predictions in the study area is demonstrated by comparison with four tidal elevation stations and two cross-section averaged current measurements. Simulated current is then used to model bed-load transport in the vicinity of a rapidly growing shoal located in the main channel of the lower system. Consisting of coarse sand and gravel, the shoal must be dredged every five to eight years. Two approaches are taken—an Eulerian parametric method in which nodal bed-load flux vectors are averaged over the tidal cycle and a Lagrangian particle tracking approach in which a finite number of sediment particles are released and tracked. Both methods yield pathways and accumulations in agreement with the observed shoal formation and the long-term rate of sediment accumulation in the shoal area.