Differences in Kilometre‐scale wind and humidity boundary‐layer structure at GATE

Abstract

During the GARP Atlantic Tropical Experiment (GA TE) in the summer of 1974, identical tethersonde packages were flown to heights of 1,000 m from two ships with a crosswind separation of approximately 4 km. The differences in the profiles and fixed level time series from the two packages are a measure of spatial variability in the tropical marine boundary layer.

Correlation analysis indicate a cellular pattern in the large‐scale wind field. Similar analyses of the temperature and humidity fields give quite different results.     

Vermiculite bio-barriers for Cu and Zn remediation: an eco-friendly approach for freshwater and sediments protection

The increase in heavy metal contamination in freshwater systems causes serious environmental problems in most industrialized countries, and the effort to find eco-friendly techniques for reducing water and sediment contamination is fundamental for environmental protection. Permeable barriers made of natural clays can be used as low-cost and eco-friendly materials for adsorbing heavy metals from water solution and thus reducing the sediment contamination. This study discusses the application of permeable barriers made of vermiculite clay for heavy metals remediation at the interface between water and sediments and investigates the possibility to increase their efficiency by loading the vermiculite surface with a microbial biofilm of Pseudomonas putida, which is well known to be a heavy metal accumulator. Some batch assays were performed to verify the uptake capacity of two systems and their adsorption kinetics, and the results indicated that the vermiculite bio-barrier system had a higher removal capacity than the vermiculite barrier (+34.4 and 22.8 % for Cu and Zn, respectively). Moreover, the presence of P. putida biofilm strongly contributed to fasten the kinetics of metals adsorption onto vermiculite sheets. In open-system conditions, the presence of a vermiculite barrier at the interface between water and sediment could reduce the sediment contamination up to 20 and 23 % for Cu and Zn, respectively, highlighting the efficiency of these eco-friendly materials for environmental applications. Nevertheless, the contribution of microbial biofilm in open-system setup should be optimized, and some important considerations about biofilm attachment in a continuous-flow system have been discussed.     

Metal and metalloid leaching from tailings into streamwater and sediments in the old Ag–Pb–Zn Terramonte mine,northern Portugal

Tailings deposited over the Castanheira, a stream which flows through the old Ag–Pb–Zn Terramonte mine area, showed a great potential environmental risk due to sulphide weathering, facilitated by the tailings–water interaction. The high concentrations of Al, Fe, Pb and Zn in the tailings are associated with the exchangeable, reducible and sulphide fractions and suggest sphalerite and pyrite occurrences. Oxidation of pyrite is responsible for the low pH values (3.38–4.89) of the tailings. The water from the Castanheira stream is not suitable for human consumption due to high concentrations of SO₄ ^2?, Mn, Al, Cd, Ni, and Pb. The lowest concentrations of metals and metalloids were detected in downstream stretches of the Castanheira. However, As, Fe and Zn in deeper sediments tend to increase downstream. Significant concentrations of trivalent forms of arsenic were detected in water samples. In downstream stretches of the Castanheira, some free ions (Fe²⁺, Mn²⁺ and Zn²⁺) also predominate and the water is saturated with ferrihydrite, goethite, hematite, lepidocrosite and magnetite.     

Low temperature,low pressure deformation and metamorphism of the Vangorda massive sulphide orebody,Yukon, Canada

The Vangorda orebody is a small stratiform massive sulphide orebody located in Anvil District, Yukon, Canada. The orebody consists of fineto medium-grained semi-massive and massive sulphides with a common sulphide mineralogy of pyrite, pyrrhotite, sphalerite, galena, and minor chalcopyrite. The host rocks and the sulphide lithofacies have been complexly deformed during two phases of deformation (D₁ and D₂) and associated metamorphism (M₁ and M₂). The effects of d₁ and M₁ are penetratively overprinted by D₂ and M₂. D₂ and M₂ resulted in tight to isoclinal F₂ folding of the orebody, remobilisation of the sulphides, recrystallisation and development of shear zones along the limbs of the F₂ folds. Chlorite thermometry and sulphide thermobarometry have been carried out on the host phyllites and on the sulphides. Chlorite was analysed from the S₁ and S₂ foliations in the phyllites to determine M₁ and M₂ temperatures, respectively. However, no difference was found between chlorite compositions in these foliations and a mean temperature of 363 °C was calculated from the tetrahedral A1_IV occupancy. Arsenopyrite thermometry yielded a comparable mean temperature of 336 °C. Sphalerite inclusions in M₂ pyrite porphyroblasts from D₂ shear zones were analysed for pressure using the sphalerite + hexagonal pyrrhotite + pyrite barometer. Inclusions were analysed in an attempt to determine if relic m₁ sphalerite, and hence pressure signature, was preserved. Inclusion compositions appear to reflect only M₂ conditions and yielded a mean pressure of 4.0 kb. Sphalerite + hexagonal pyrrhotite assemblages were analysed from D₂ shear zones to determine the M₂ pressure using the sphalerite + hexagonal pyrrhotite barometer. These calculations yielded a mean pressure of 6.1 kb. The M₂ temperatures and pressures calculated using these calibrations are in good agreement with those estimated from petrogenetic relationships.     

Seasonal Variation of MODIS Vegetation Indexes and Their Statistical Relationship With Climate Over the Subtropic Evergreen Forest in Zhejiang, China

Moderate Resolution Imaging Spectroradiometer (MODIS) 16-day 1-km vegetation index products, daily temperature, photosynthetically active radiation (PAR), and precipitation from 2001 to 2004 were utilized to analyze the temporal variations of the MODIS normalized difference vegetation index (NDVI) and enhanced vegetation index (EVI), as well as their correlations with climate over the evergreen forested sites in Zhejiang-a humid subtropical region in the southeast of China. The results showed that both NDVI and EVI could discern the seasonal variation of the evergreen forests. Attributed to the sufficient precipitation in the study area, the growth of vegetation is mainly controlled by energy; as a result, NDVI, and especially EVI, is more correlated with temperature and PAR than precipitation. Compared with NDVI, EVI is more sensitive to climate condition and is a better indicator to study vegetation variations in the study region     

Sequence hierarchy in a Mesoproterozoic interior sag basin: from basin fill to reservoir scale,the Tombador Formation,Chapada Diamantina Basin,Brazil

The Tombador Formation exhibits depositional sequence boundaries placed at the base of extensive amalgamated fluvial sand sheets or at the base of alluvial fan conglomeratic successions that indicate basinward shifts of facies. The hierarchy system that applies to the Tombador Formation includes sequences of different orders, which are defined as follows: sequences associated with a particular tectonic setting are designated as ‘first order’ and are separated by first‐order sequence boundaries where changes in the tectonic setting are recorded; second‐order sequences represent the major subdivisions of a first‐order sequence and reflect cycles of change in stratal stacking pattern observed at 10² m scales (i.e., 200–300 m); changes in stratal stacking pattern at 10¹ m scales indicate third‐order sequences (i.e., 40–70 m); and changes in stratal stacking pattern at 10⁰ m scales are assigned to the fourth order (i.e., 8–12 m). Changes in palaeogeography due to relative sea level changes are recorded at all hierarchical levels, with a magnitude that increases with the hierarchical rank. Thus, the Tombador Formation corresponds to one‐first‐order sequence, representing a distinct intracratonic sag basin fill in the polycyclic history of the Espinhaço Supergroup in Chapada Diamantina Basin. An angular unconformity separates fluvial‐estuarine to alluvial fan deposits and marks the second‐order boundary. Below the angular unconformity the third‐order sequences record fluvial to estuarine deposition. In contrast, above the angular unconformity these sequences exhibit continental alluvial successions composed conglomerates overlain by fluvial and eolian strata. Fourth‐order sequences are recognized within third‐order transgressive systems tract, and they exhibit distinct facies associations depending on their occurrence at estuarine or fluvial domains. At the estuarine domain, they are composed of tidal channel, tidal bar and overlying shoreface heterolithic strata. At the fluvial domain the sequences are formed of fluvial deposits bounded by fine‐grained or tidal influenced intervals. Fine grained intervals are the most reliable to map in fourth‐order sequences because of their broad laterally extensive sheet‐like external geometry. Therefore, they constitute fourth‐order sequence boundaries that, at the reservoir approach, constitute the most important horizontal heterogeneity and, hence, the preferable boundaries of production zones. The criteria applied to assign sequence hierarchies in the Tombador Formation are based on rock attributes, are easy to apply, and can be used as a baseline for the study of sequence stratigraphy in Precambrian and Phanerozoic basins placed in similar tectonic settings.     

Organic carbon and nitrogen stable isotopes in the intertidal sediments from the Yangtze Estuary, China

The natural isotopic compositions and C/N elemental ratios of sedimentary organic matter were determined in the intertidal flat of the Yangtze Estuary. The results showed that the ratios of carbon and nitrogen stable isotopes were respectively −29.8‰ to − 26.0‰ and 1.6‰–5.5‰ in the flood season (July), while they were −27.3‰ to − 25.6‰ and 1.7‰–7.8‰ in the dry season (February), respectively. The δ¹³C signatures were remarkably higher in July than in February, and gradually increased from the freshwater areas to the brackish areas. In contrast, there were relatively complex seasonal and spatial changes in stable nitrogen isotopes. It was also reflected that δ¹⁵N and C/N compositions had been obviously modified by organic matter diagenesis and biological processing, and could not be used to trace the sources of organic matter at the study area. In addition, it was considered that the mixing inputs of terrigenous and marine materials generally dominated sedimentary organic matter in the intertidal flat. The contribution of terrigenous inputs to sedimentary organic matter was roughly estimated according to the mixing balance model of stable carbon isotopes.     

Spatial vent opening probability map of Etna volcano (Sicily, Italy)

We produce a spatial probability map of vent opening (susceptibility map) at Etna, using a statistical analysis of structural features of flank eruptions of the last 2?ky. We exploit a detailed knowledge of the volcano structures, including the modalities of shallow magma transfer deriving from dike and dike-fed fissure eruptions analysis on historical eruptions. Assuming the location of future vents will have the same causal factors as the past eruptions, we converted the geological and structural data in distinct and weighted probability density functions, which were included in a non-homogeneous Poisson process to obtain the susceptibility map. The highest probability of new eruptive vents opening falls within a N-S aligned area passing through the Summit Craters down to about 2,000?m?a.s.l. on the southern flank. Other zones of high probability follow the North-East, East-North-East, West, and South Rifts, the latter reaching low altitudes (～400?m). Less susceptible areas are found around the faults cutting the upper portions of Etna, including the western portion of the Pernicana fault and the northern extent of the Ragalna fault. This structural-based susceptibility map is a crucial step in forecasting lava flow hazards at Etna, providing a support tool for decision makers.