Tectonics of a fast spreading center: A Deep-Tow and sea beam survey on the East Pacific rise at 19°30′ S

Sea Beam and Deep-Tow were used in a tectonic investigation of the fast-spreading (151 mm yr^-1) East Pacific Rise (EPR) at 19°30 S. Detailed surveys were conducted at the EPR axis and at the Brunhes/Matuyama magnetic reversal boundary, while four long traverses (the longest 96 km) surveyed the rise flanks. Faulting accounts for the vast majority of the relief. Both inward and outward facing fault scarps appear in almost equal numbers, and they form the horsts and grabens which compose the abyssal hills. This mechanism for abyssal hill formation differs from that observed at slow and intermediate spreading rates where abyssal hills are formed by back-tilted inward facing normal faults or by volcanic bow-forms. At 19°30 S, systematic back tilting of fault blocks is not observed, and volcanic constructional relief is a short wavelength signal (less than a few hundred meters) superimposed upon the dominant faulted structure (wavelength 2–8 km). Active faulting is confined to within approximately 5–8 km of the rise axis. In terms of frequency, more faulting occurs at fast spreading rates than at slow. The half extension rate due to faulting is 4.1 mm yr^-1 at 19°30 S versus 1.6 mm yr^-1 in the FAMOUS area on the Mid-Atlantic Ridge (MAR). Both spreading and horizontal extension are asymmetric at 19°30 S, and both are greater on the east flank of the rise axis. The fault density observed at 19°30 S is not constant, and zones with very high fault density follow zones with very little faulting. Three mechanisms are proposed which might account for these observations. In the first, faults are buried episodically by massive eruptions which flow more than 5–8 km from the spreading axis, beyond the outer boundary of the active fault zone. This is the least favored mechanism as there is no evidence that lavas which flow that far off axis are sufficiently thick to bury 50–150 m high fault scarps. In the second mechanism, the rate of faulting is reduced during major episodes of volcanism due to changes in the near axis thermal structure associated with swelling of the axial magma chamber. Thus the variation in fault spacing is caused by alternate episodes of faulting and volcanism. In the third mechanism, the rate of faulting may be constant (down to a time scale of decades), but the locus of faulting shifts relative to the axis. A master fault forms near the axis and takes up most of the strain release until the fault or fault set is transported into lithosphere which is sufficiently thick so that the faults become locked. At this point, the locus of faulting shifts to the thinnest, weakest lithosphere near the axis, and the cycle repeats.     

Low multipath antennas for GNSS-based attitude determination systems applied to high-altitude platforms

High-altitude platforms (HAPs) are a flexible and attractive technology for providing innovative wireless services. These aerial platforms can be successfully employed for mobile or broadband communications and for disaster monitoring or response. However, one of the open issues is whether HAP stations can provide reliable services without temporal outages owing to stratospheric winds that can cause positional and attitude instabilities thus affecting the communication system operation. To counteract this issue, one possible solution is to use reconfigurable antennas whose pointing direction can be adjusted depending on the platform spatial orientation. However, this would require real-time three-axial attitude data. As a possible solution, this paper will review the potential of GNSS-based attitude determination systems with reference to HAP stations. In particular, it will be shown how the use of a particular class of low multipath and lightweight antennas can provide a high degree of accuracy without altering the avionic ballast.     

Effects of temporally correlated infiltration on water flow in an unsaturated–saturated system

Effects of temporally correlated infiltration on water flow in an unsaturated–saturated system were investigated. Both white noise and exponentially correlated infiltration processes were considered. The moment equations of the pressure head (ψ) were solved numerically to obtain the variance and autocorrelation functions of ψ at 14 observation points. Monte Carlo simulations were conducted to verify the numerical results and to estimate the power spectrum of ψ (S _ψψ ). It was found that as the water flows through the system, the variance of the ψ (\( \sigma_{\psi }^{2} \)) were damped by the system: the deeper in the system, the smaller the \( \sigma_{\psi }^{2} \), and the larger the correlation timescale of the infiltration process (λ _I ), the larger the \( \sigma_{\psi }^{2} \). The unsaturated–saturated system gradually filters out the short-term fluctuations of ψ and the damping effect is most significant in the upper part of the system. The fluctuations of ψ is non-stationary at early time and becomes stationary as time progresses: the larger the value of λ _I , the longer the non-stationary period. The correlation timescale of the ψ (λ _ψ ) increases with depth and approaches a constant value at depth: the larger the value of λ _I , the larger the value of λ _ψ . The results of the estimated S _ψψ is consistent with those of the variance and autocorrelation function.     

Petrology of ultramafic and mafic xenoliths in picrite of Kahoolawe Island,Hawaii

A picrite lava (22 wt% MgO; 35 vol.% ol) along the western shore of the1.3–1.4 Ma Kahoolawe tholeiitic shield, Hawaii, contains small xenoliths of harzburgite, lherzolite, norite, and wehrlite. The various rock types have textures where either orthopyroxene, clinopyroxene, or plagioclase is in a poikilitic relationship with olivine. The Mg#s of the olivine, orthopyroxene, and clinopyroxene in this xenolith suite range between 86 and 82; spinel Mg#s range from 60 to 49, and plagioclase is An_75–80. A ⁸⁷Sr/⁸⁶Sr ratio for one ol-norite xenolith is 0.70444. In comparison, the host picrite has olivine phenocrysts with an average Mg# of 86.2 (range 87.5–84.5), and a whole-rock ⁸⁷Sr/⁸⁶Sr ratio of 0.70426. Textural and isotopic information together with mineral compositions indicate that the xenoliths are related to Kahoolawe tholeiitic magmatism, but are not crystallization products of the magma represented by their host picrite. Rather, the xenoliths are crystalline products of earlier primitive liquids (FeO/MgO ranging 1 to 1.3) at 5–9 kbar in the cumulate environment of a magma reservoir or conduit system. The presence of ultramafic xenoliths in picrite but not in typical Kahoolawe tholeiitic lava (6–9 wt% MgO) is consistent with replenishment of reservoirs by dense Mg-rich magma emplaced beneath resident, less dense tholeiitic magma. Mg-rich magmas have proximity to reservoir cumulate zones and are therefore more likely than fractionated residual liquids to entrain fragments of cumulate rock.     

Pulsatory characteristics of wind velocity in sand flow over typical underlying surfaces

Pulsatory characteristics of wind velocity in sand flow over Gobi and mobile sand surface have been investigated experimentally in the wind tunnel. The primary goal of this paper is to reveal the relation- ship between pulsatory characteristics of instantaneous wind speed in sand flow and the motion state of sand grains. For a given underlying surface, pulsation of wind velocities in sand flow on different heights has a good correlation. As the space distance among different heights increases, fluctuation of instantaneous wind speed presents a decreasing trend and its amplitude is closely related to the mo- tion state of sand grains and their transport. Pulsatory intensity increases with the indicated wind speed, but its relative value does not depend on it, only agrees with height.     

A review of the numerical modelling of salt mobilization from groundwater-surface water interactions

Salinization of land and water is a significant challenge in most continents and particularly in arid and semi-arid regions. The need to accurately forecast surface and groundwater interactions has promoted the use of physically-based numerical modelling approaches in many studies. In this regard, two issues can be considered as the main research challenges. First, in contrast with surface water, there is generally less observed level and salinity data available for groundwater systems. These data are critical in the validation and verification of numerical models. The second challenge is to develop an integrated surface-groundwater numerical model that is capable of salt mobilization modelling but which can be validated and verified against accurate observed data. This paper reviews the current state of understanding of groundwater and surface water interactions with particular respect to the numerical modelling of salt mobilization. 3D physically-based fully coupled surface-subsurface numerical model with the capability of modelling density-dependent, saturated-unsaturated solute transport is an ideal tool for groundwater-surface water interaction studies. It is concluded that there is a clear need to develop modelling capabilities for the movement of salt to, from, and within wetlands to provide temporal predictions of wetland salinity which can be used to assess ecosystem outcomes.     

Groundwater sustainability and groundwater/surface-water interaction in arid Dunhuang Basin,northwest China

The Dunhuang Basin, a typical inland basin in northwestern China, suffers a net loss of groundwater and the occasional disappearance of the Crescent Lake. Within this region, the groundwater/surface-water interactions are important for the sustainability of the groundwater resources. A three-dimensional transient groundwater flow model was established and calibrated using MODFLOW 2000, which was used to predict changes to these interactions once a water diversion project is completed. The simulated results indicate that introducing water from outside of the basin into the Shule and Danghe rivers could reverse the negative groundwater balance in the Basin. River-water/groundwater interactions control the groundwater hydrology, where river leakage to the groundwater in the Basin will increase from 3,114?×?10⁴ m³/year in 2017 to 11,875?×?10⁴ m³/year in 2021, and to 17,039?×?10⁴ m³/year in 2036. In comparison, groundwater discharge to the rivers will decrease from 3277?×?10⁴ m³/year in 2017 to 1857?×?10⁴ m³/year in 2021, and to 510?×?10⁴ m³/year by 2036; thus, the hydrology will switch from groundwater discharge to groundwater recharge after implementing the water diversion project. The simulation indicates that the increased net river infiltration due to the water diversion project will raise the water table and then effectively increasing the water level of the Crescent Lake, as the lake level is contiguous with the water table. However, the regional phreatic evaporation will be enhanced, which may intensify soil salinization in the Dunhuang Basin. These results can guide the water allocation scheme for the water diversion project to alleviate groundwater depletion and mitigate geo-environmental problem.