The project “spice”

Proposed to both the French and the European Space Agency as one possible small mission, SPICE is a project for a dedicated small satellite for a near-IR spectroscopic all-sky survey. The instrument would cover the spectral range 1.8 - 3.6µm, possibly extended to 1.8 - 7µm, at a resolution of 100, with pixels of 1 arc-min. The excellent sensitivity (0.02 MJy sr-1) results from: i) the quasi-zero level of background due to the efficient passive cooling of the whole experiment; ii) the use of large format arrays; iii) the non-stop observing mode (drift-scanning). The spectral domain, complementing the one of ISO, partially opaque from the ground, is specially rich in spectral features tracing stars and all components of the Interstellar Medium (molecular, atomic and ionized gas, dust). With a cooling below 80 K of the focal instrument, then it becomes possible to consider doubling the spectral domain and to cover the whole 1.8 - 7µm range.     

A search for previously unrecognized metal-poor subdwarfs in the Hipparcos astrometric catalogue

We have identified 317 stars included in the Hipparcos astrometric catalogue that have parallaxes measured to a precision of better than 15 per cent, and the location of which in the ( M _V ,( B − V ) _T ) diagram implies a metallicity comparable to or less than that of the intermediate-abundance globular cluster M5. We have undertaken an extensive literature search to locate Strömgren, Johnson/Cousins and Walraven photometry for over 120 stars. In addition, we present new UBV ( RI )_C photometry of 201 of these candidate halo stars, together with similar data for a further 14 known metal-poor subdwarfs. These observations provide the first extensive data set of R _C I _C photometry of metal-poor, main-sequence stars with well-determined trigonometric parallaxes. Finally, we have obtained intermediate-resolution optical spectroscopy of 175 stars.
47 stars still lack sufficient supplementary observations for population classification; however, we are able to estimate abundances for 270 stars, or over 80 per cent of the sample. The overwhelming majority have near-solar abundance, with their inclusion in the present sample stemming from errors in the colours listed in the Hipparcos catalogue. Only 44 stars show consistent evidence of abundances below [Fe/H]=−1.0 . Nine are additions to the small sample of metal-poor subdwarfs with accurate photometry. We consider briefly the implication of these results for cluster main-sequence fitting.     

Bandpass calibration of a wideband spectrometer using coherent pulse injection

We present a relatively simple time domain method for determining the bandpass response of a system by injecting a nanosecond pulse and capturing the system voltage output. A pulse of sub-nanosecond duration contains all frequency components with nearly constant amplitude up to 1 GHz. Hence, this method can accurately determine the system bandpass response to a broadband signal. In a novel variation on this impulse response method, a train of pulses is coherently accumulated providing precision calibration with a simple system. The basic concept is demonstrated using a pulse generator-accumulator setup realised in a Bedlam board which is a high speed digital signal processing unit. The same system was used at the Parkes radio telescope between 2–13 October 2013 and we demonstrate its powerful diagnostic capability. We also present some initial test data from this experiment.     

Degradation and Detoxification of Chlorophenols in Continuous‐Flow Fixed‐Bed Aerobic Reactors

An indigenous bacterial strain of Delftia sp. capable of degrading 2,4‐dicholorophenol and an indigenous bacterial community that degrades 2,4,6‐trichlorophenol (TCP) were employed to inoculate continuous down‐flow fixed‐bed reactors. Continuous‐reactors were constructed from PVC employing hollow PVC cylinders as support material. Synthetic wastewater was prepared by dissolving the corresponding chlorophenol in non‐sterile groundwater. Biodegradation was evaluated by spectrophotometry, chloride release, GC, and microbial growth. Detoxification was evaluated by using Daphnia magna as test organism. Delftia sp. was able to remove an average of 95.6% of DCP. Efficiency in terms of chemical oxygen demand (COD) was of 88.9%. The indigenous bacterial community that degrades TCP reached an average efficiency of 96.5 and 91.6% in terms of compound and COD removal, respectively. In both cases stoichiometric removal of chloride and detoxification was achieved. When synthetic wastewater feed was cut off for 7 days, both reactors showed a fast recovery after inflow restarting, reaching average outlet concentration values within 36 h. The promising behavior of the microorganisms and the low cost of the reactors tested allow us to suggest their possible application to remediation processes.     

Gravity field approximation in the area of Greece with emphasis on local characteristics

The accuracy of the gravity field approximation depends on the amount of the available data and their distribution as well as on the variation of the gravity field. The variation of the gravity field in the Greek mainland, which is the test area in this study, is very high (the variance of point free air gravity anomalies is 3191.5mgal ²). Among well known reductions used to smooth the gravity field, the complete isostatic reduction causes the best possible smoothing, however remain strong local anomalies which disturb the homogeneity of the gravity field in this area. The prediction of free air gravity anomalies using least squares collocation and regional covariance function is obtained within a ±4 ... ±19mgal accuracy depending on the local peculiarities of the free air gravity field. By taking into account the topography and its isostatic compensation with the usual remove-restore technique, the accuracy of the prediction mentioned obove was increased by about a factor of 4 and the prediction results become quite insensitive to the covariance function used (local or regional). But when predicting geoidal heights, in spite of using the smoothed field, the prediction results remain still depend on the covariance function used in such a way that differences up to about 50cm/100km result between relative geoidal heights computed with regional or local covariance functions.     

Fine grain sediment transport and deposition in the Patos Lagoon–Cassino beach sedimentary system

Extensive mud deposits superimposed on the predominantly sandy inner continental shelf adjacent to the Patos Lagoon estuary, indicates that the Lagoon is a potential source of fine sediments to the coastal sedimentary system. The lagoon is large and shallow, and the water movement is mainly controlled by wind-driven set-up and set-down. The mean river inflow is around 2000 m³ s⁻¹, although peak flow rates exceeding 20,000 m³ s⁻¹ have been observed during El Niño periods. Though the tidal elevations are small, tidal velocities in the lagoon's inlet can be significant due to the large extension of the backwaters. Moreover, significant exchange flows can be generated between the estuary and coastal area due to barotropic pressure gradients established as a function of wind and freshwater discharge. The predominant net flow is seawards, but opposite near-bed flows due to pronounced vertical salinity stratification can also be observed. The coastal area is characterized by small tidal effects, large scale ocean circulation, wind-induced residual flows and wave-driven currents, where the waves originate from swell or are locally generated.     

A hydrothermal deposit from explorer ridge in the northeast Pacific Ocean

Crusts composed of nontronite and ferromanganese oxides were recovered from Explorer Ridge, a spreading ridge segment in the northeastern Pacific Ocean located off the west coast of Canada. The chemical and mineralogical composition of the crusts closely resembles that of the mound-like hydrothermal deposits recently discovered at the FAMOUS site on the Mid-Atlantic Ridge and on the Galapagos spreading centre. Compositional anomalies suggest that the crusts are precipitates of hydrothermal vent solutions which were ejected discontinuously and subsequently mixed with seawater.     

Density,porosity, mineralogy,and internal structure of cosmic dust and alteration of its properties during high‐velocity atmospheric entry

X‐ray microtomography (XMT), X‐ray diffraction (XRD), and magnetic hysteresis measurements were used to determine micrometeorite internal structure, mineralogy, crystallography, and physical properties at μm resolution. The study samples include unmelted, partially melted (scoriaceous), and completely melted (cosmic spherules) micrometeorites. This variety not only allows comparison of the mineralogy and porosity of these three micrometeorite types but also reveals changes in meteoroid properties during atmospheric entry at various velocities. At low entry velocities, meteoroids do not melt and their physical properties do not change. The porosity of unmelted micrometeorites varies considerably (0–12%) with one friable example having porosity around 50%. At higher velocities, the range of meteoroid porosity narrows, but average porosity increases (to 16–27%) due to volatile evaporation and partial melting (scoriaceous phase). Metal distribution seems to be mostly unaffected at this stage. At even higher entry velocities, complete melting follows the scoriaceous phase. Complete melting is accompanied by metal oxidation and redistribution, loss of porosity (1 ± 1%), and narrowing of the bulk (3.2 ± 0.5 g cm^?3) and grain (3.3 ± 0.5 g cm^?3) density range. Melted cosmic spherules with a barred olivine structure show an oriented crystallographic structure, whereas other subtypes do not.