Prediction of pile response to lateral spreading by 3-D soil–water coupled dynamic analysis: Shaking in the direction perpendicular to ground flow

The 1995 Kobe earthquake seriously damaged numerous buildings with pile foundations adjacent to quay walls. The seismic behavior of a pile group is affected by movement of quay walls, pile foundations, and liquefied backfill soil. For such cases, a three-dimensional (3-D) soil–water coupled dynamic analysis is a promising tool to predict overall behavior. We report predictions of large shake table test results to validate 3-D soil–water coupled dynamic analyses, and we discuss liquefaction-induced earth pressure on a pile group during the shaking in the direction perpendicular to ground flow. Numerical analyses predicted the peak displacement of footing and peak bending moment of the group pile. The earth pressure on the pile in the crustal layer is most important for the evaluation of the peak bending moment along the piles. In addition, the larger curvatures in the bending moment distribution along the piles at the water side in the liquefied ground were measured and predicted.     

Ionospheric electromagnetic perturbations observed on DEMETER satellite before Chile M7.9 earthquake

Based on the ionospheric electromagnetic data observed on DEMETER satellite of France, the ionospheric electromagnetic signals were analyzed within 10 days before Chile M7.9 earthquake on November 14, 2007. It is found that, low frequency electromagnetic disturbances began to increase in a large scale of latitude, and reached to a maximum one week prior to the earthquake, and at about three days before the quake, the peak values shifted to lower latitude. Taking three days as a group, spatial images of a fe...     

A computational procedure for joining separate map sheets

Map sheets have been often used as a basic spatial unit for managing spatial data produced from paper maps. This often results in incompatibility between adjacent map sheets, because spatial objects do not cross the boundaries smoothly and even the boundaries themselves do not match their neighbors exactly. To solve the problem this paper proposes a computational procedure for joining separate map sheets to obtain seamless spatial data. Line objects digitized separately in different map sheets are considered, which are frequently used to represent road networks, gas pipelines, and boundaries of polygon objects. The procedure consists of three steps: (1) extraction of end nodes, (2) detection of matching nodes, and (3) transformation of the map sheet. Each step goes interactively so that unexpected errors can be avoided by human observation. To test the validity of the procedure, map sheets are combined containing the road network data of Tokyo 23-ku area, Japan. This revised version was published online in July 2006 with corrections to the Cover Date.     

Non‐linear system identification of the versatile‐typed structures by a novel signal processing technique

Non‐linear structural identification problems have raised considerable research efforts since decades, in which the Bouc–Wen model is generally utilized to simulate non‐linear structural constitutive characteristic. Support vector regression (SVR), a promising data processing method, is studied for versatile‐typed structural identification. First, a model selection strategy is utilized to determine the unknown power parameter of the Bouc–Wen model. Meanwhile, optimum SVR parameters are selected automatically, instead of tuning manually. Consequently, the non‐linear structural equation is rewritten in linear form, and is solved by the SVR technique. A five‐floor versatile‐type structure is studied to show the effectiveness of the proposed method, in which both power parameter known and unknown cases are investigated. Copyright © 2007 John Wiley & Sons, Ltd.     

Ultrasonic measurements of Vp and Qp: relaxation spectrum of complex modulus on basalt melts

Ultrasonic compressional wave velocity V_p and quality factor Q_p have been measured in alkali basalt, olivine basalt and basic andesite melts in the frequency range of 3.4–22 MHz and in the temperature range of 1100–1400°C. Velocity and attenuation of the melts depend on frequency and temperature, showing that there are relaxation mechanisms in the melts. Complex moduli are calculated from the ultrasonic data. The results fit well a complex modulus of Arrhenius temperature dependence with log-normal Gaussian distribution in relaxation times of attenuation. The analysis yields average relaxation time, its activation energy, relaxed modulus, unrelaxed modulus and width of Gaussian distribution in relaxation times. Relaxed modulus is smaller (17.5 GPa) for basic andesite melt of high silica and high alumina contents than for the other two basalt melts (18.1–18.4 GPa). The most probable relaxation times decrease from ～ 3 × 10^?10 s for basic andesite to ～ 10^?11 s for alkali basalt at 1400°C. Activation energies of attenuation, ranging from 270 to 340 kJ mol^?1 in the three melts, are highest in basic andesite. Longitudinal viscosity values and their temperature dependences are also calculated from V_p and Q_p data. The volume viscosity values are estimated from the data using the shear viscosity values. Longitudinal, volume and shear viscosities and their activation energies are highest in the basic andesite melt of the most polymerized structure.     

Explosive volcanic eruptions triggered by cosmic rays: Volcano as a bubble chamber

Volcanoes with silica-rich and highly viscous magma tend to produce violent explosive eruptions that result in disasters in local communities and that strongly affect the global environment. We examined the timing of 11 eruptive events that produced silica-rich magma from four volcanoes in Japan (Mt. Fuji, Mt. Usu, Myojin-sho, and Satsuma-Iwo-jima) over the past 306 years (from AD 1700 to AD 2005). Nine of the 11 events occurred during inactive phases of solar magnetic activity (solar minimum), which is well indexed by the group sunspot number. This strong association between eruption timing and the solar minimum is statistically significant to a confidence level of 96.7%. This relationship is not observed for eruptions from volcanoes with relatively silica-poor magma, such as Izu-Ohshima. It is well known that the cosmic-ray flux is negatively correlated with solar magnetic activity, as the strong magnetic field in the solar wind repels charged particles such as galactic cosmic rays that originate from outside of the solar system. The strong negative correlation observed between the timing of silica-rich eruptions and solar activity can be explained by variations in cosmic-ray flux arising from solar modulation. Because silica-rich magma has relatively high surface tension (~ 0.1 Nm^?1), the homogeneous nucleation rate is so low that such magma exists in a highly supersaturated state without considerable exsolution, even when located relatively close to the surface, within the penetration range of cosmic-ray muons (1–10 GeV). These muons can contribute to nucleation in supersaturated magma, as documented by many authors studying a bubble chamber, via ionization loss. This radiation-induced nucleation can lead to the pre-eruptive exsolution of H₂O in the silica-rich magma. We note the possibility that the 1991 Mt. Pinatubo eruption was triggered by the same mechanism: an increase in cosmic-ray flux triggered by Typhoon Yunya, as a decrease in atmospheric pressure results in an increase in cosmic-ray flux. We also speculate that the snowball Earth event was triggered by successive large-scale volcanic eruptions triggered by increased cosmic-ray flux due to nearby supernova explosions.     

An experimental study on felsic rock–artificial seawater interaction: implications for hydrothermal alteration and sulfate formation in the Kuroko mining area of Japan

Experimental studies on the interactions between artificial seawater (ASW) and fresh rhyolite, perlite and weakly altered dacitic tuff containing a small amount of smectite suggest changing cation transfer during smectite-forming processes. Initially, dissolution of K from the rocks accompanies incorporation of Mg and Ca from ASW during both earlier (devitrification stage) and later smectite formation, whereas Ca incorporated with early smectite formation redissolves with progressive reaction. Barium mobility increases toward the later smectite-forming reactions. Therefore, the large amounts of barite, anhydrite and gypsum in Kuroko ore deposits are considered to have precipitated from hydrothermal solutions derived from the interaction with previously altered felsic rocks during late smectite formation, rather than by the reaction with fresh felsic rocks.Editorial handling: D. Lentz     

Postglacial stratigraphic evolution of a current-influenced sandy shelf: offshore Kujukuri strandplain,central Japan

Sandy shelf sediments are important elements of clastic sedimentary systems because of their wide distribution in the geological record and their significance as hydrocarbon reservoirs. Although many studies have investigated shelf sediments influenced by waves or tidal currents, little is known about shelf sediments influenced by oceanic currents, particularly their lithofacies characteristics and stratigraphic evolution. This study investigated the stratigraphic evolution of shelf sediments off the Kujukuri strandplain facing the Pacific Ocean, which is influenced by the strong Kuroshio Current. Sediment cores were obtained from six locations on the Kujukuri shelf (34 to 124 m water depth) using a vibrocorer. The dominant lithofacies is mud-free sand with low-angle cross-lamination associated with alternating beds of finer and coarser sand with cross-lamination. These display depositional processes influenced by storm waves and the Kuroshio Current, respectively. This finding is consistent with the previously presented modern and historical observations of the Kuroshio Current and estimates of the storm-wave base. Radiocarbon dates show that the sediment succession formed during the last transgressive and highstand stages after 13·1 ka. The depositional processes during the stages represent a transition from storm waves with abundant sediment supply to both storm waves and the Kuroshio Current with sediment starvation mainly due to its trapping in the strandplain. Comparison to other Holocene–Modern shelf systems suggests that the sandy shelf successions are strongly influenced by oceanic currents under conditions of limited riverine input and open coastal geometry. The resultant sand-dominated succession is characterized by reversal of the proximal to distal grain-size trend compared to the fining for most other recognized wave/storm-dominated shelf successions. This is because of seaward increase in the influence of the Kuroshio Current. Thus, shelf deposits are naturally complex, and these may be further complicated by the additional influence of oceanic currents above the usual wave-dominated and tide-dominated end members.     

费县城乡建设用地增减挂钩探析

2009年以来,费县全力推进城乡建设用地增减挂钩工作,为县域经济发展提供了用地空间,为加快城乡统筹发展,调整优化城乡用地布局结构,缓解建设用地供需矛盾,促进土地集约、高效和可持续利用奠定了良好的基础。但还存在与相关规划协调和衔接比较困难、项目资金投入大、拆迁难度大、项目权属调整复杂等问题。针对这些问题提出了强化合作机制、完善土地流转机制、加大资金投入等措施。     

济阳坳陷中生代地层剥蚀厚度、原始厚度恢复及原型盆地研究

在采用各种地层剥蚀量的计算方法对济阳坳陷中生代各主要不整合面地层剥蚀厚度恢复的基础上,结合钻井及地震资料,对中生代各主要构造层的原始地层厚度进行了恢复。以此为切入点,对济阳坳陷区中生代盆地原型进行了初步探讨,将其划分为5期盆地原型：早-中三叠世为一大型内陆坳陷盆地;晚三叠世整体挤压抬升剥蚀;早-中侏罗世为弱挤压背景下的山间盆地;晚侏罗世-早白垩世为受正断层控制的断陷盆地;晚白垩世为断陷后的坳陷盆地。