Enhanced Acoustic Backscatter Due to High Abundance of Sand Dollars,Dendraster excentricus

Abstract

Detailed acoustic surveys of benthic sediments were conducted in July 1995 and September 1998 in the vicinity of Humboldt Bay, California. During these surveys, a band of enhanced acoustic backscatter was observed offshore from the bay entrance, approximately parallel to the isobaths, in water depths ranging from 16–24 m. In order to assess the cause of the increase in backscatter levels, a more comprehensive study was conducted in August and September 1999 using 100 kHz side-scan sonar, bottom grab sampling and underwater video recording. New observations indicated that a dense population of sand dollars (Dendraster excentricus) coincided with the enhanced backscatter band. Compared to the two previous acoustic studies, the central section of the band expanded westward by 180 m and the southern section of the band shifted eastward by 160 m, possibly resulting from a change in the biological or physical factors which influence the location and breadth of sand dollars.

The relationship between high sand dollar abundance and enhanced acoustic backscatter was further verified in the near shore region off Samoa Beach California, where a dense, banded population of sand dollars was previously observed. Video footage confirmed the presence of a band of sand dollars, also nominally parallel to the isobaths, in water depths of 8–15 m. A band of enhanced backscatter coincided with the dense sand dollar population. The identification of dense aggregations of sand dollars through enhanced acoustic backscatter could lead to the use of acoustic techniques to study sand dollar distributions and abundance.     

Improving the time resolution of surfzone bathymetry using in situ altimeters

Surfzone bathymetry often is resolved poorly in time because watercraft surveys cannot be performed when waves are large, and remote sensing techniques have limited vertical accuracy. However, accurate high-frequency bathymetric information at fixed locations can be obtained from altimeters that sample nearly continuously, even during storms. A method is developed to generate temporally and spatially dense maps of evolving surfzone bathymetry by updating infrequent spatially dense watercraft surveys with the bathymetric change measured by a spatially sparse array of nearly continuously sampling altimeters. The update method is applied to observations of the evolution of shore-perpendicular rip current channels (dredged in Duck, NC, 2012) and shore-parallel sandbars (observed in Duck, NC, 1994). The updated maps are compared with maps made by temporally interpolating the watercraft surveys, and with maps made by spatially interpolating the altimeter measurements at any given time. Updated maps of the surfzone rip channels and sandbars are more accurate than maps obtained by using either only watercraft surveys or only the altimeter measurements. Hourly altimeter-updated bathymetric estimates of five rip channels show rapid migration and infill events not resolved by watercraft surveys alone. For a 2-month observational record of sandbars, altimeter-updated maps every 6 h between nearly daily surveys improve the time resolution of rapid bar-migration events.     

The thermal conductivity of meteorites: New measurements and analysis

We have measured the thermal conductivity at low temperatures (5-300 K) of six meteorites representing a range of compositions, including the ordinary chondrites Cronstad (H5) and Lumpkin (L6), the enstatite chondrite Abee (E4), the carbonaceous chondrites NWA 5515 (CK4 find) and Cold Bokkeveld (CM2), and the iron meteorite Campo del Cielo (IAB find). All measurements were made using a Quantum Design Physical Properties Measurement System, Thermal Transport Option (TTO) on samples cut into regular parallelepipeds of ∼2-6 mm dimension. The iron meteorite conductivity increases roughly linearly from 15 W m⁻¹ K⁻¹ at 100 K to 27 W m⁻¹ K⁻¹ at 300 K, comparable to typical values for metallic iron. By contrast, the conductivities of all the stony samples except Abee appear to be controlled by the inhomogeneous nature of the meteorite fabric, resulting in values that are much lower than those of pure minerals and which vary only slightly with temperature above 100 K. The L and CK sample conductivities above 100 K are both about 1.5 W m⁻¹ K⁻¹, that of the H is 1.9 W m⁻¹ K⁻¹, and that of the CM sample is 0.5 W m⁻¹ K⁻¹; by contrast the literature value at 300 K for serpentine is 2.5 W m⁻¹ K⁻¹ and those of enstatite and olivine range from 4.5 to 5 W m⁻¹ K⁻¹ (which is comparable to the Abee value). These measurements are among the first direct measurements of thermal conductivity for meteorites. The results compare well with previous estimates for meteorites, where conductivity was derived from diffusivity measurements and modeled heat capacities; our new values are of a higher precision and cover a wider range of temperatures and meteorite types. If the rocky material that makes up asteroids and provides the dust to comets, Kuiper Belt objects, and icy satellites has the same low thermal conductivities as the ordinary and carbonaceous chondrites measured here, this would significantly change models of their thermal evolution. These values would also lower their thermal inertia, thus affecting the Yarkovsky and YORP evolution of orbits and spin for solid objects; however, in this case the effect would not be as great, as thermal inertia only varies as the square root of the conductivity and, for most asteroids, is controlled by the dusty nature of asteroidal surfaces rather than the conductivity of the material itself.     

Characterization of Mason Gully (H5): The second recovered fall from the Desert Fireball Network

Mason Gully, the second meteorite recovered using the Desert Fireball Network (DFN), is characterized using petrography, mineralogy, oxygen isotopes, bulk chemistry, and physical properties. Geochemical data are consistent with its classification as an H5 ordinary chondrite. Several properties distinguish it from most other H chondrites. Its 10.7% porosity is predominantly macroscopic, present as intergranular void spaces rather than microscopic cracks. Modal mineralogy (determined via PS‐XRD, element mapping via energy dispersive spectroscopy [EDS], and X‐ray tomography [for sulfide, metal, and porosity volume fractions]) consistently gives an unusually low olivine/orthopyroxene ratio (0.67?0.76 for Mason Gully versus ~1.3 for typical H5 ordinary chondrites). Widespread “silicate darkening” is observed. In addition, it contains a bright green crystalline object at the surface of the recovered stone (diameter ≈ 1.5 mm), which has a tridymite core with minor α‐quartz and a rim of both low‐ and high‐Ca pyroxene. The mineralogy allows the calculation of the temperatures and ?(O₂) characterizing thermal metamorphism on the parent body using both the two‐pyroxene and the olivine‐chromite geo‐oxybarometers. These indicate that MG experienced a peak metamorphic temperature of ~900 °C and had a similar ?(O₂) to Kernouvé (H6) that was buffered by the reaction between olivine, metal, and pyroxene. There is no evidence for shock, consistent with the observed porosity structure. Thus, while Mason Gully has some unique properties, its geochemistry indicates a similar thermal evolution to other H chondrites. The presence of tridymite, while rare, is seen in other OCs and likely exogenous; however, the green object itself may result from metamorphism.     

Facies controls on the distribution of diagenesis and compaction in fluvial-deltaic deposits

The Upper Triassic – Lower Jurassic Åre Formation comprising the deeper reservoir in the Heidrun Field offshore mid-Norway consists of fluvial channel sandstones (FCH), floodplain fines (FF), and sandy and muddy bay-fill sediments (SBF, MBF) deposited in an overall transgressive fluvial to lower delta plain regime. The formation has been investigated to examine possible sedimentary facies controls on the distribution of cementation and compaction based on petrography and SEM/micro probe analyses of core samples related to facies associations and key stratigraphic surfaces. The most significant authigenic minerals are kaolinite, calcite and siderite. Kaolinite and secondary porosity from dissolution of feldspar and biotite are in particular abundant in the fluvial sandstones. The carbonate minerals show complex compositional and micro-structural variation of pure siderite (Sid I), Mg-siderite (Sid II), Fe-dolomite, ankerite and calcite, displaying decreasing Fe from early to late diagenetic carbonate cements. An early diagenetic origin for siderite and kaolinite is inferred from micro-structural relations, whereas pore filling calcite and ankerite formed during later diagenesis. The Fe-dolomite probably related to mixing-zone dolomitization from increasing marine influences, and a regional correlatable calcite cemented layer has been related to a flooding event. Porosity values in non-cemented sandstone samples are generally high in both FCH and SBF facies associations averaging 27%. Differential compaction between sandstone and mudstone has a ratio of up to 1:2 and with lower values for MBF. We emphasize the role of eogenetic siderite cementation in reducing compactability in the fine-grained, coal-bearing sediments most prominent in MBF facies. This has implications for modeling of differential compaction between sandstone and mudstones deposited in fluvial-deltaic environments.     

Narrow associated quasi-stellar object absorbers: clustering, outflows and the line-of-sight proximity effect

Using data from the Sloan Digital Sky Survey data release 3 (SDSS DR3), we investigate how narrow (<700 km s⁻¹) C  iv and Mg  ii quasar absorption-line systems are distributed around quasars. The C  iv absorbers lie in the redshift range 1.6 < z < 4 and the Mg  ii absorbers in the range 0.4 < z < 2.2. By correlating absorbers with quasars on different but neighbouring lines of sight, we measure the clustering of absorbers around quasars on comoving scales between 4 and 30 Mpc. The observed comoving correlation lengths are   r _o∼ 5 h ⁻¹Mpc  , similar to those observed for bright galaxies at these redshifts. Comparing correlations between absorbers and the quasars, in whose spectra they are identified, then implies: (i) that quasars destroy absorbers to comoving distances of ∼300 kpc (C  iv ) and ∼800 kpc (Mg  ii ) along their lines of sight; (ii) that ≳40 per cent of C  iv absorbers within 3000 km s⁻¹ of the quasi-stellar object are not a result of large-scale clustering but rather are directly associated with the quasar itself; (iii) that this intrinsic absorber population extends to outflow velocities of the order of 12 000 km s⁻¹; (iv) that this outflow component is present in both radio-loud and radio-quiet quasars and (v) that a small high-velocity outflow component is also observed in the Mg  ii population. We also find an indication that absorption systems within 3000 km s⁻¹ are more abundant for radio-loud quasars than for radio-quiet quasars. This suggests either that radio-loud objects live in more massive haloes, or that their radio activity generates an additional low-velocity outflow, or both.     

Pore size distribution in an uncompacted equilibrated ordinary chondrite

The extraordinarily uncompacted nature of the ordinary L chondrite fall Baszkówka gives a unique opportunity to investigate the potentially pre-compaction pore size distribution in an equilibrated ordinary chondrite. Using X-ray microtomography and helium pycnometry on two samples of Baszkówka, we have found that on average, two-thirds of the 19.0% porosity resides in inter- and intra-granular voids with volumes between 3×10⁻⁵ and 3 mm³. We show the cumulative number density of pore volumes observable by X-ray microtomography obeys a power law distribution function in this equilibrated ordinary chondrite. We foresee these data adding to our understanding of the impact processing of chondrites and their parent asteroids, where porosity and pore size play significant roles in the parameterization of impact events.     

Currents in a small channel on a sandy tidal flat

Channels affect drainage and bed stresses on tidal flats. Here, near-bottom currents observed on a sandy tidal flat are compared with those observed 35 m away inside a shallow (≈0.3 m deep) channel. For water depths between 0.5 and 2.5 m (when both current meters are submerged), current speeds 0.13 m above the bed on the flat are about 30% greater than those observed 0.13 m above the bed in the channel, and are approximately equal to those observed 0.58 m above the channel bed (0.26 m above the flat elevation). Flow directions on the flat are similar to those in the channel. For flows directed across the channel axis, the ratio of speeds increases from about 1.3 to about 2.2 with increasing water depth. The corresponding ratio of the vertical velocity variances (a proxy for turbulence) decreases from about 1.5 to about 0.2, suggesting that the turbulence near the bed of the channel is greater than that near the bed of the flat for water depths greater than about 1.0 m. Drag coefficients estimated with the vertical velocity variance are approximately 70% larger in the channel than over the visually smoother flat, consistent with prior studies suggesting that channels may increase tidal-flat roughness. For flows directed along the channel axis (in the cross-flat direction), the ratio of speeds (1.2) is similar to the ratio predicted by a cross-flat momentum (along-channel) balance.     

Black ordinary chondrites: An analysis of abundance and fall frequency

Abstract— Black ordinary chondrite meteorites sample the spectral effects of shock on ordinary chondrite material in the space environment. Since shock is an important regolith process, these meteorites may provide insight into the spectral properties of the regoliths on ordinary chondrite parent bodies. To determine how common black chondrites are in the meteorite collection and, by analogy, the frequency of shock-alteration in ordinary chondrites, several of the world's major meteorite collections were examined to identify black chondrites. Over 80% of all catalogued ordinary chondrites were examined and, using an optical definition, 61 black chondrites were identified. Black chondrites account for approximately 13.7% of ordinary chondrite falls. If the optically altered gas-rich ordinary chondrites are included, the proportion of falls that exhibit some form of altered spectral properties increases to 16.7%. This suggests that optical alteration of asteroidal material in the space environment is a relatively common process.