The effects of metamorphism on O and Fe isotope compositions in the Biwabik Iron Formation, northern Minnesota

The Biwabik Iron Formation of Minnesota (1.9 Ga) underwent contact metamorphism by intrusion of the Duluth Complex (1.1 Ga). Apparent quartz–magnetite oxygen isotope temperatures decrease from ∼700°C at the contact to ∼375°C at 2.6 km distance (normal to the contact in 3D). Metamorphic pigeonite at the contact, however, indicates that peak temperatures were greater than 825°C. The apparent O isotope temperatures, therefore, reflect cooling, and not peak metamorphic conditions. Magnetite was reset in δ¹⁸O as a function of grain size, indicating that isotopic exchange was controlled by diffusion of oxygen in magnetite for samples from above the grunerite isograd. Apparent quartz–magnetite O isotope temperatures are similar to calculated closure temperatures for oxygen diffusion in magnetite at a cooling rate of ∼5.6°C/kyr, which suggests that the Biwabik Iron Formation cooled from ∼825 to 400°C in ∼75 kyr at the contact with the Duluth Complex. Isotopic exchange during metamorphism also occurred for Fe, where magnetite–Fe silicate fractionations decrease with increasing metamorphic grade. Correlations between quartz–magnetite O isotope fractionations and magnetite–iron silicate Fe isotope fractionations suggest that both reflect cooling, where the closure temperature for Fe was higher than for O. The net effect of metamorphism on δ¹⁸O–δ⁵⁶Fe variations in magnetite is a strong increase in δ¹⁸O_Mt and a mild decrease in δ⁵⁶Fe with increasing metamorphic grade, relative to the isotopic compositions that are expected at the low temperatures of initial magnetite formation. If metamorphism of Iron Formations occurs in a closed system, bulk O and Fe isotope compositions may be preserved, although re-equilibration among the minerals may occur for both O and Fe isotopes. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Enhancing understanding of breakdown and collapse in the Yorkshire Dales using ground penetrating radar on cave sediments

Historical evidence shows block breakdown and collapse are actively occurring in large fault aligned caverns in the Yorkshire Dales karst. Deployment of ground penetrating radar at two such sites has provided detailed images of the sedimentary sequences below the present day cavern floor but no large blocks are imaged within the sediments. Solutional processes must be removing limestone from the sediment to allow continued cavern growth. Possible mechanisms to account for the lack of large blocks within the sediment fill are discussed.     

Iron isotopes constrain biologic and abiologic processes in banded iron formation genesis

The voluminous 2.5 Ga banded iron formations (BIFs) from the Hamersley Basin (Australia) and Transvaal Craton (South Africa) record an extensive period of Fe redox cycling. The major Fe-bearing minerals in the Hamersley-Transvaal BIFs, magnetite and siderite, did not form in Fe isotope equilibrium, but instead reflect distinct formation pathways. The near-zero average δ⁵⁶Fe values for magnetite record a strong inheritance from Fe³⁺ oxide/hydroxide precursors that formed in the upper water column through complete or near-complete oxidation. Transformation of the Fe³⁺ oxide/hydroxide precursors to magnetite occurred through several diagenetic processes that produced a range of δ⁵⁶Fe values: (1) addition of marine hydrothermal , (2) complete reduction by bacterial dissimilatory iron reduction (DIR), and (3) interaction with excess that had low δ⁵⁶Fe values and was produced by DIR. Most siderite has slightly negative δ⁵⁶Fe values of ∼ −0.5‰ that indicate equilibrium with Late Archean seawater, although some very negative δ⁵⁶Fe values may record DIR. Support for an important role of DIR in siderite formation in BIFs comes from previously published C isotope data on siderite, which may be explained as a mixture of C from bacterial and seawater sources.Several factors likely contributed to the important role that DIR played in BIF formation, including high rates of ferric oxide/hydroxide formation in the upper water column, delivery of organic carbon produced by photosynthesis, and low clastic input. We infer that DIR-driven Fe redox cycling was much more important at this time than in modern marine systems. The low pyrite contents of magnetite- and siderite-facies BIFs suggests that bacterial sulfate reduction was minor, at least in the environments of BIF formation, and the absence of sulfide was important in preserving magnetite and siderite in the BIFs, minerals that are poorly preserved in the modern marine record. The paucity of negative δ⁵⁶Fe values in older (Early Archean) and younger (Early Proterozoic) BIFs suggests that the extensive 2.5 Ga Hamersley-Transvaal BIFs may record a period of maximum expansion of DIR in Earth’s history.     

Dissolved carbon and 33-133-133-1anomalies in the water column caused by hydrocarbon seeps on the northwestern Gulf of Mexico slope

Alkalinity, dissolved inorganic carbon (DIC), and ¹³C profiles from seep sites on the northwestern Gulf of Mexico upper slope show anomalously negative ¹³C values of up to –4.5 PDB, increased levels of DIC of up to 2.45 mmole/liter, and slight alkalinity rises of up to 2.54 meq/liter, relative to water column profiles from a seep-free site (0.63, 2.04 mmole/liter, and 2.39 meq/liter). The observed DIC enrichments coupled with the¹³C-depletions are attributed to the release of CO₂ by microbial oxidation of crude oil in the seep environment, and its migration into the water column. The ¹³C composition of the migrating CO₂ is estimated to be –26.0 on the basis of dissolved carbon inventory. Manifestation of DIC and ¹³C anomalies in the water column caused by hydrocarbon seepage holds promise to be useful for hydrocarbon reconnaissance surveys over large offshore tracts on account of the simplicity of sampling acquisition, and rapidity of analytical techniques in the laboratory.     

Glutathione S-transferase from an antarctic fish, Dissostichus mawsoni

Glutathione S-transferase activity was measured in the hepatic cytosol front Dissostichus mawsoni and Pagothenia borchgrevinki. Activity measures with 1-chloro-2,4-dinitrobenzene as substrate were 11·2 and 16·7 μmol/min/g tissue respectively. Little or no activity was detected when p-nitrobenzyl chloride or 3,4-dichloro-1-nitrobenzene were used as substrate. The hepatic glutathione S-transferases from D. mawsoni were partially purified using gel filtration and chromatofocusing. Three peaks of activity were resolved. The major isozyme (158-fold purification) eluting at pH7·1 appeared to be catalytically a homodimer. The isozyme was highly inhibited by triphenyltin chloride (IC₅₀ = 0·1 μ) while inhibition constants for Cibicron Blue 3GA, bromosulphophalein and hematin were 1·1, 20 and 34 μ respectively.     

Accumulation of organic and inorganic carbon in Pliocene–Pleistocene sediments along the SW African margin

The Ocean Drilling Program Leg 175 recovered a unique series of stratigraphically continuous sedimentary sections along the SW African margin, an area which is presently affected by active coastal upwelling. The accumulation rates of organic and inorganic carbon are a major component of this record. Four Leg 175 sites (1082, 1084, 1085, 1087) are chosen as part of a latitudinal transect from the present northern to southern boundaries of the Benguela Current upwelling system, to decipher the Pliocene–Pleistocene history of biogenic production and its relationship with global and local changes in oceanic circulation and climate. The pattern of CaCO₃ and C_org mass accumulation rates (MARs) over 0.25-Myr intervals indicates that the evolution of carbon burial is highly variable between the northern and the southern Benguela regions, as well as between sites that have similar hydrological conditions. This, as well as the presence over most locations of high-amplitude, rapid changes of carbon burial, reflect the partitioning of biogenic production and patterns of sedimentation into local compartments over the Benguela margin. The combined mapping of CaCO₃ and C_org MARs at the study locations suggests four distinct evolutionary periods, which are essentially linked with major steps in global climate change: the early Pliocene, the mid-Pliocene warm event, a late Pliocene intensification of northern hemisphere glaciation and the Pleistocene. The early Pliocene spatially heterogeneous patterns of carbon burial are thought to reflect the occurrence of mass-gravitational movements over the Benguela slope which resulted in disruption of the recorded biogenic production. This was followed (3.5–3 Ma) by an episode of peak carbonate accumulation over the whole margin and, subsequently, by the onset of Benguela provincialism into a northern and a southern sedimentary regime near 2 Ma. This mid and late Pliocene evolution is interpreted as a direct response to changes in the ventilation of bottom and intermediate waters, as well as to dynamics of the subtropical gyral circulation and associated wind stress.     

Contaminant concentrations and toxicity of sea-surface microlayer near Los Angeles, California

Sea-surface microlayer samples were collected from six nearshore areas receiving different amounts of anthropogenic inputs. The samples were analyzed for selected trace metals, chlorinated hydrocarbons, and polycyclic aromatic hydrocarbons. The relative toxicities of the samples were determined with fish embryo bioassays.Contaminant concentrations generally increased from offshore to the inshore stations. Contaminant concentrations were several orders of magnitude higher in microlayer samples from the highly industrialized Los Angeles and Long Beach harbors compared to samples from a site 15km offshore. Microlayer samples from the inshore stations were significantly more toxic, and induced significantly more developmental abnormalities and chromosome aberrations, than samples from the offshore stations.     

Distributions of dissolved and particulate biogenic thiols in the subartic Pacific Ocean

Dissolved and particulate concentrations of the biogenic thiols cysteine (Cys), arginine–cysteine (Arg–Cys), glutamine–cysteine (Gln–Cys), γ-glutamate–cysteine (γ-Glu–Cys) and glutathione (GSH) were measured in the subartic Pacific Ocean in the summer of 2003 using high performance liquid chromatography (HPLC) with precolumn derivatization as reported in previous work. In this study, a preconcentration protocol for the derivatized thiols was utilized to extend detection limits of dissolved thiols to picomolar levels. The measured concentrations of particulate and dissolved thiols were uncoupled, with distinctive depth profiles and large differences in the particulate to dissolved ratios between individual compounds. Glutathione was the most abundant particulate thiol whereas the most abundant dissolved thiol was γ-Glu–Cys, with concentrations as high as 15 nM. Given the relatively small pool of intracellular γ-Glu–Cys and the very low dissolved concentrations of GSH, we hypothesize that glutathione released from cells is rapidly converted to the potentially degradation resistant γ-Glu–Cys outside the cell. The relatively high concentrations of other dissolved thiols compared to particulate concentrations implies both biological exudation and slow degradation rates. Some thiols appear to vary with changes in nutrient availability but this effect is difficult to decouple from changes in community structure inferred from pigment analyses. Dissolved thiol concentrations also exceed typical metal concentrations in the subartic Pacific, supporting previous arguments that they may be important in metal speciation.     

An improved Ewing heat probe frame

The standard Ewing heat probe frame has been improved through the design of a new takedown model whose parts are held together by lynch pins. When a 600 lb (272 kg) unit of this type is taken apart, the heaviest single piece of the dismantled unit weighs only 75 lb (34 kg).This makes it feasible for one person to handle, transport, and assemble the new unit. A central, main support member of a heat probe using this frame can be suspended over the side of a research vessel while the heavier temperature recorder and ballast weights are attached by means of the quickaction lynch pins. This makes it possible to use this device on relatively small vessels which are not designed for coring work, having a minimum of free deck space and without launching platforms or hydraulic A-frame booms.