Atmospheric radiative transfer simulation for atmospheric correction of remote sensing data

The radiance leaving the earth-atmosphere system which can be sensed by a satellite borne radiometer is the sum of radiation emission from the earth surface and each atmospheric level that are transmitted to the top of the atmosphere. The radiation emission from the earth surface and the radiance of each atmospheric level can be separated from the radiance at the top the atmospheric level measured by a satellite borne radiometer. However, it is very difficult to measure the atmospheric radiance, especially the synchronous measurement with the satellite. Thus some atmospheric radiative transfer models have been developed to provide many options for modeling atmospheric radiation transport, such as LOWTRAN, MODTRAN, 6S, FASCODE, LBLRTM, SHARC, and SAMM. Meanwhile, these models can support the detailed detector system design, the optimization and evaluation of satellite mission parameters, and the data processing procedures. As an example, the newly atmospheric radiative transfer models, MODTRAN will be compared with other models after the atmospheric radiative transfer is described. And the atmospheric radiative transfer simulation procedures and their applications to atmospheric transmittance, retrieval of atmospheric elements, and surface parameters, will also be presented.     

近60年来长江河口河势变化及其对水动力和盐水入侵的影响Ⅱ.水动力

本文基于本系列论文Ⅰ中数值化的长江河口20世纪50年代、70年代海图获得的岸线和水深资料,以及2012年水深实测资料,设置不同年代模式网格,考虑径流量、潮汐和风应力作用,建立长江河口水动力和盐水入侵三维数值模式,模拟和分析不同年代潮汐潮流、单宽余通量、分汊口水通量和分流比,及其河势变化对它们的影响。最大潮差在3个年代间的变化主要在北支区域,50年代至70年代,北支潮差减小,减小区域集中在北支中段,2012年相比70年代北支潮差增大。单宽水通量在50年代北港大于南港,北支下段向上游输运、上段量值较小,在70年代南港大于北港,北支下段量值较小、上段向下游,在2012年南北港水通量较为接近,北港稍大,整个北支水通量向上游。定量给出了50、70年代和2012年南北支、南北港大潮期间和小潮期间涨潮、落潮和净水量和分流比,结合河势变化分析了不同年代间的变化原因。     

Characteristics and cause analysis of heavy haze in Changchun City in Northeast China

Northeast China has been reported as having serious air pollution in China with increasing occurrences of severe haze episodes. Changchun City, as the center of Northeast China, has longstanding industry and is an important agricultural base. Additionally, Changchun City has a long winter requiring heating of buildings emitting pollution into the air. These factors contribute to the complexity of haze pollution in this area. In order to analyze the causes of heavy haze, surface air quality has been monitored from 2013 to 2015. By using satellite and meteorological data, atmospheric pollution status, spatio-temporal variations and formation have been analyzed. Results indicated that the air quality in 88.9% of days exceeding air quality index(AQI) level-1 standard(AQI 50) according to the National Ambient Air Quality Standard(NAAQS) of China. Conversely, 33.7% of the days showed a higher level with AQI 100. Extreme haze events(AQI 300) occurred frequently during agricultural harvesting period(from October 10 to November 10), intensive winter heating period(from Late-December to February) and period of spring windblown dust(April and May). Most daily concentrations of gaseous pollutants, i.e., NO_2(43.8 μg/m~3), CO(0.9 mg/m~3), SO_2(37.9 μg/m~3), and O_3(74.9 μg/m~3) were evaluated within level-1 concentration limits of NAAQS standards. However, particulate matter(PM_(2.5) and PM10) concentrations(67.3 μg/m~3 and 115.2 μg/m~3, respectively) were significantly higher than their level-1 limits. Severe haze in spring was caused by offsite transported dust and windblown surface soil. Heavy haze periods during fall and winter were mainly formed by intensive emissions of atmospheric pollutants and steady weather conditions(i.e., low wind speed and inversion layer). The overlay emissions of widespread straw burning and coal combustion for heating were the dominant factors contributing to haze in autumn, while intensive coal burning during the coldest time was the primary component of total emissions. In addition, general emissions including automobile exhaust, road and construction dust, residential and industrial activities, have significantly increased in recent years, making heavy haze a more frequent occurrence. Therefore, both improved technological strategies and optimized pollution management on a regional scale are necessary to minimize emissions in specified seasons in Changchun City, as well as comprehensive control measures in Northeast China.     

沙漠下垫面地面温度及能量收支的BATS模式参数化改进

利用陆面过程模式BATS,引入地表发射率及两种大气发射率参数化方案,同时引入不同的地表粗糙度参数化方案,对比各种参数化方案对沙漠下垫面地面温度及能量收支的模拟状况。结果表明：采用Van Bavel等发展的地表发射率及Chung等发展的大气发射率方案可以明显改进地面温度及向上长波辐射的模拟,Chung等方案在夜间与正午的模拟效果更好,减小了1 ℃左右的地面温度模拟偏差,减小了10 W·m^-2左右的向上长波辐射模拟偏差。晴天地面温度及向上长波辐射的模拟结果优于阴天。利用Zhang等发展的裸土粗糙度参数化方案也会提高模式对地表感热通量模拟的准确性。     

松辽盆地增强型地热系统开发选区评价

干热岩是一种新型清洁能源,其开发利用区的确定十分重要。笔者首先通过对松辽盆地热源、资源量、导热、聚热、地震活动5个方面资料的收集,提出了松辽盆地增强型地热系统开发选区适宜性评价方法;然后选取8项评价因子,利用ArcGIS 10.2平台将松辽盆地划分为26个评价单元,根据打分法和层次分析法(AHP)求取每个因子的权重;最后,对26个选区进行综合评价,将其分成适宜、较适宜、一般适宜、较不适宜和不适宜5个等级。结果表明:松辽盆地干热岩开发适宜区和较适宜区主要集中在盆地中部的大安—大庆一带,确定的适宜选区范围对今后干热岩开发工作具有一定指导作用。     

云南都龙超大型锡锌多金属矿床中闪锌矿微量及稀土元素地球化学特征

云南马关都龙锡锌多金属矿床位于滇东南老君山锡锌钨多金属成矿区南部,是我国三大锡石硫化物矿床之一,目前对其矿床成因认识存在较大分歧。本文采用ICP-MS对都龙矿床中闪锌矿微量元素及稀土元素组成进行分析,以探讨该矿床成矿作用,为甄别已有成因观点提供证据。结果表明,矿床中闪锌矿以富集Fe、Mn、In、Co、Sn和贫Cd、Ga、Ge、Ni等元素为特征,成矿温度属于中—高温,其微量元素组成与白牛厂矿床(与燕山晚期花岗岩有关的矽卡岩型矿床)中的闪锌矿非常相似,和远源矽卡岩型铅锌矿床(核桃坪和芦子园)中闪锌矿存在一定差异,明显有别于喷流沉积型铅锌矿床(云南澜沧老厂和广东大宝山)中闪锌矿。此外,该矿床闪锌矿稀土配分模式多为轻稀土元素富集中等的向右倾斜曲线,以LREE/HREE值高、Eu负异常明显和Ce异常不明显为特征,与矿区燕山晚期隐伏花岗岩稀土元素特征基本一致,成矿物质来源以矿区燕山晚期隐伏花岗岩为主。结合近期矿山开采和地质勘探所揭露的矿化和矽卡岩蚀变的垂向分带等矿床地质特征,认为云南马关都龙锡锌多金属矿床属于与燕山晚期花岗岩有关的矽卡岩型多金属矿床,其中层状矽卡岩的形成应为成矿流体顺层交代的结果,矿化类型和围岩蚀变的分带与隐伏岩体的距离有关。     

情境建模下的LBS智能信息服务推送方法

为满足移动互联网用户的个性化信息服务需求,引入用户兴趣模型匹配技术,提出了一种基于情境建模下的LBS智能信息推送服务模式,通过构建位置过滤模块、用户兴趣模型匹配及智能信息分类模块,实现了对推送信息的层层过滤,并同时结合反馈处理部分的修正功能实时改进推送模型的精度,从而提高了信息服务的质量和效率,使推荐的信息资源更加符合用户的实际需要。原型系统的实际应用表明了该方法的有效性。     

An Experimenting Field Approach for the Numerical Solution of Multiphase Flow in Porous Media

In this work, we apply the experimenting pressure field technique to the problem of the flow of two or more immiscible phases in porous media. In this technique, a set of predefined pressure fields are introduced to the governing partial differential equations. This implies that the velocity vector field and the divergence at each cell of the solution mesh can be determined. However, since none of these fields is the true pressure field entailed by the boundary conditions and/or the source terms, the divergence at each cell will not be the correct one. Rather the residue which is the difference between the true divergence and the calculated one is obtained. These fields are designed such that these residuals are used to construct the matrix of coefficients of the pressure equation and the right‐hand side. The experimenting pressure fields are generated in the solver routine and are fed to the different routines, which may be called physics routines, which return to the solver the elements of the matrix of coefficients. Therefore, this methodology separates the solver routines from the physics routines and therefore results in simpler, easy to construct, maintain, and update algorithms.     

云南个旧锡铜多金属矿集区资源潜力及找矿方向

云南个旧锡铜多金属矿集区是中国最重要的锡、铜多金属矿集区之一,本文从多方面对该矿集区的资源潜力进行了分析,并指明了找矿方向。