TRANSIT,an experimental archaeological program in periglacial environment: Problem,methodology, first results

The aim of the experimental archaeological program TRANSIT is to improve the scientific study of Paleolithic sites. This program is based on studies and experiments carried out at high altitudes in the French Alps. One of its goals is to assess the effects of periglacial processes on spatial distributions within archaeological assemblages and on artifacts and bones. Research on sedimentary environments elucidates stratogenesis in periglacial contexts. In particular, sedimentary models that are useful for interpreting fossil deposits were identified. The first results obtained from experimental artifact test plots emphasize the importance and speed of changes that occur in such a climatic and morphodynamic context. Mean lateral displacements from 1.66 to 4.75 cm yr⁻¹ were measured. Moreover, analysis of osseous and dental pieces showed that they experienced important damage. Works on pollen assemblages have shown that most of the pollen deposited on the ground surface is quickly removed and that, owing to the very uneven preservation of pollen taxa, an important distortion of the initial spectrum occurs. A model of spatial arrangement of artifacts linked to the action of solifluction processes is also proposed. Finally, application of these results to some Paleolithic sites in the Massif Central and southwest France are discussed. © 1998 John Wiley & Sons, Inc.     

Inclusions of silicate and sulfate melts in chrome diposide from the Inagli deposit,Yakutia, Russia

Melt inclusions were studied in chrome diopside from the Inagli deposit of gemstones in the Inagli massif of alkaline ultrabasic rocks of potassic affinity in the northwestern Aldan shield, Yakutia, Russia. The chrome diopside is highly transparent and has an intense green color. Its Cr₂O₃ content varies from 0.13 to 0.75 wt %. Primary and primary-secondary polyphase inclusions in chrome diopside are dominated by crystal phases (80–90 vol %) and contain aqueous solution and a gas phase. Using electron microprobe analysis and Raman spectroscopy, the following crystalline phases were identified. Silicate minerals are represented by potassium feldspar, pectolite [NaCa₂Si₃O₈(OH)], and phlogopite. The most abundant minerals in the majority of inclusions are sulfates: glaserite (aphthitalite) [K₃Na(SO₄)₂], glauberite [Na₂Ca(SO₄)₂], aluminum sulfate, anhydrite (CaSO₄), gypsum (CaSO₄ × 2H₂O), barite (BaSO₄), bloedite [Na₂Mg(SO₄)₂ × 4H₂O], thenardite (NaSO₄), polyhalite [K₂Ca₂Mg(SO₄)₄ × 2H₂O], arcanite (K₂SO₄), and celestite (SrSO₄). In addition, apatite was detected in some inclusions. Chlorides are probably present among small crystalline phases, because some analyses of aggregates of silicate and sulfate minerals showed up to 0.19–10.3 wt % Cl. Hydrogen was identified in the gas phase of polyphase inclusions by Raman spectroscopy. The composition of melt from which the chrome diopside crystallized was calculated on the basis of the investigation of silicate melt inclusions. This melt contains 53.5 wt % SiO₂, considerable amounts of CaO (16.3 wt %), K₂O (7.9 wt %), Na₂O (3.5 wt %), and SO₃ (1.4 wt %) and moderate amounts of Al₂O₃ (7.5 wt %), MgO (5.8 wt %), FeO (1.1 wt %), and H₂O (0.75 wt %). The content of Cr₂O₃ in the melt was 0.13 wt %. Many inclusions were homogenized at 770–850°C, when all of the crystals and the gas phase were dissolved. The material of inclusions heated up to the homogenization temperature became heterogeneous even during very fast quenching (two seconds) producing numerous small crystals. This fact implies that most of the inclusions contained a salt (rather than silicate) melt of sulfate-dominated composition. Such inclusions were formed from salt globules (with a density of about 2.5 g/cm³) occurring as an emulsion in the denser (2.6 g/cm³) silicate melt from which the chrome diopside crystallized.     

Climatic significance of natric horizons in Permian (Asselian) palaeosols of north-central Kansas, USA

Columnar structured horizons have been recognized in ancient coastal palaeosols of several Lower Permian (Asselian) stratigraphic units of north-central Kansas. These strongly developed columnar, polygonal-shaped peds are characteristic of sodium-influenced (natric) argillic horizons, and are commonly indicative of semi-arid to arid environments. Evaporite features above and below these palaeosols support the conclusion for a dry palaeoclimate. The columnar peds are typically 3–15 cm in diameter and exhibit domed tops. Fine clay fills the cracks between the columnar peds, and is generally of a darker colour than the peds. Each natric horizon has a low value and chroma colour, apparently the result of carbonate accumulation. The natric horizons in these Permian palaeosols appear to have been partially influenced by sodium-rich groundwaters. Root traces and root moulds are found between peds in all natric horizons, indicating plant succession after columnar ped formation. These sodium-influenced palaeosol profiles occur as part of a spectrum of palaeosol types that indicate cyclical climate change associated with glacioeustatic sea-level fluctuations.     

Determining the optimum cell size of digital elevation model for hydrologic application

Scale is one of the most important but unsolved issues in various scientific disciplines that deal with spatial data. The arbitrary choice of grid cell size for contour interpolated digital elevation models (DEM) is one of the major sources of uncertainty in the hydrologic modelling process. In this paper, an attempt was made to identify methods for determining an optimum cell size for a contour interpolated DEM in prior to hydrologic modelling. Twenty-meter interval contour lines were used to generate DEMs of five different resolutions, viz., 30, 45, 60, 75, and 90 m using TOPOGRID algorithm. The obtained DEMs were explored for their intrinsic quality using four different methods, i.e., sink analysis, fractal dimension of derived stream network, entropy measurement and semivariogram modelling. These methods were applied to determine the level artifacts (interpolation error) in DEM surface as well as derived stream network, spatial information content and spatial variability respectively. The results indicated that a 90 m cell size is sufficient to capture the terrain variability for subsequent hydrologic modelling in the study area. The significance of this research work is that it provides methods which DEM users can apply to select an appropriate DEM cell size in prior to detailed hydrologic modelling.     

The nature and distribution of fluids during amphibolite facies metamorphism, Naxos (Greece)

On the basis of fluid inclusion evidence, pervasive influx of deep-seated CO₂-rich fluids has been invoked to account for mid- to upper amphibolite facies (M2_B) metamorphism on the island of Naxos (Cyclades, Greece). In this paper, mineral devolatilization and melt equilibria are used to constrain the composition of both syn- and post-peak-M2_B fluids in the deepest exposed levels of the metamorphic complex. The results indicate that peak-M2_B fluids were spatially and compositionally heterogeneous throughout the high-grade core of the complex, whereas post-peak-M2_B fluids were generally water-rich. The observed heterogeneities in syn-M2_B fluid composition are inconsistent with pervasive CO₂-flushing models invoked by previous workers on the basis of fluid inclusion evidence. It is likely that few CO₂-rich fluid inclusions on Naxos preserve fluids trapped under peak metamorphic conditions. It is suggested that many of these inclusions have behaved as chemically open systems during the intense deformation that accompanied the uplift of the metamorphic complex. A similar process may explain the occurrence of some CO₂-rich fluid inclusions in granulite facies rocks.     

An evaluation of Rock-Eval pyrolysis for the study of Australian coals including their kerogen and humic acid fractions

Rock-Eval pyrolysis was performed on lithotype and depth profiles of Tertiary brown coals and a coalification profile of Permian bituminous coals. The humic acid and kerogen fractions from the coals are also investigated by this technique along with the effect of base extraction on the kerogen fraction. Structural variations between brown coal lithotypes are primarily reflected by changes in Oxygen Index Value. This result was supported by the results from the depth profile (same lithotype). A wide range of Hydrogen Indices (independent of depth) but similar Oxygen Indices were observed. The results from the Qualification profile show that the Oxygen Indices varied with rank, whereas Hydrogen Indices show a greater dependence on coal type. A plot of $\text{H}\text{C}$versus Hydrogen Index produced good correlations with the brown (0.77) and bituminous (0.90) samples lying on two separate lines intersecting at high H/C. This result (and higher correlation for bituminous samples) reflects the expected dependence of hydrogen index on oxygen content (present primarily as hydroxyl groups). A high correlation (0.95) between quantitative IR data (K 2920 cm mg^?1) and Hydrogen Indices supports previous conclusions regarding the dependence of Hydrogen Indices on the aliphatic structure of the samples.     

Tveitite,a new calcium yttrium fluoride

Tveitite is a new mineral with formula of the type $\text{Ca}{}_{\mathrm{1?x}}\text{(}\text{Y, RE}\text{)}{}_{\mathrm{x}}\text{F}{}_{\mathrm{2+x}}\text{where}\text{x}$ is approximately 0.3. It is found in a cleavelandite pegmatite at Høydalen in Tørdal, Telemark, S. Norway. The sub-cell is thought to be monoclinic, $\text{a}\text{′=3.924,}\text{b}\text{′=3.893,}\text{c}\text{′=5.525, ß=90°26′,}\text{Z}\text{=2}$. The structure is very similar to that of fluorite and can be described in terms of a pseudo-cubic cell $\text{[1}\text{1}\text{0]}{}_0\text{= 5.527, [110]}{}_0\text{= 5.527,}\text{c}\text{= 5.525, α = 90°18′, γ = 89°37′}$ which contains approximately 1[YCa₃F₉]. The mineral shows twinning in at lest three different directions giving a grating structure probably due to high-low inversion. DTA studies show an inversion point at about 670°C. Material heated above this temperature gives X-ray diffraction patterns corresponding to yttrofluorite (a₀ 5.528). The effect of trivalent ions on the stability of fluorite is discussed.     

29Si MAS NMR relaxation study of shocked Coconino Sandstone from Meteor Crater, Arizona

 ²⁹Si nuclear magnetic resonance (NMR) spectroscopy was used to characterize the silica phases in a moderately-shocked Coconino sandstone from Meteor Crater, Arizona. The spectra were recorded using direct polarization, magic-angle spinning, and variable delay times in a saturation recovery pulse sequence. Resonances observed at -97.3, -107.1, -113.9 and -191.2 ppm were assigned to a densified hydrous form of amorphous silica (D phase), quartz, coesite and stishovite phases, respectively. The relative percentages were estimated as 1.7, 80.6, 16.4 and 1.3% for the D, quartz, coesite, and stishovite phases. The power-law recoveries of the magnetization for the quartz and coesite phases can be interpreted in terms of their phase geometries. Received: January 3 1997 / Revised, accepted: August 4 1997     

Retrofit-reinforcement of cohesive soil slopes using high strength geotextiles with drainage capability

A series of geotechnical centrifuge physical modeling tests were performed to assess the potential use of a new cost-effective mechanically stabilized earth system for retrofitting marginally stable cohesive slopes. The proposed system utilizes the dual functions of reinforcement and drainage by directly inserting high strength non-woven geotextile strips into slopes, with little or no excavation required behind the slope face. The system significantly increases the factor of safety of potentially unstable cohesive slopes, and can be constructed at less expense and more rapidly than conventional mechanically stabilized earth systems.