Karst groundwater protection in the Kupa River catchment area and sustainable development

One of the most significant water resources in the Republic of Croatia is the catchment area of the Kupa River, located in the region bordering the Republic of Slovenia. About 88% of the total amount of water in this catchment originates in Croatia and just 12% from Slovenia; therefore, the largest part of the catchment area (about 1000 km²) is on the Croatian side of the border. It is a typical karst area of the Dinarides with aquifers characterized by a relatively rapid water exchange, high groundwater flow velocities and aquifers open to human impact from the surface. Consequently, the aquifers are highly vulnerable and at risk. Due to the availability of large quantities of high-quality spring water (about 6 m³/s), the entire area has a strategic importance within the context of any future development strategy pertaining to the western part of Croatia. The catchment area on the Croatian side was investigated using a wide range of research methods that included a classical hydrogeological approach, the detailed hydrologic calculation of water balance to the hydrogeochemical analyses and modelling. The objective was to determine protection zones and protection measures for the whole area. The difficulties are increased due to the fact that the karst catchment area is crossed by major traffic corridors, oil pipelines and a railway and that many settlements and a highly developed wood industry are present. The combination of protecting water resources with adequate prevention measures and necessary remedial activities that should satisfy the very strict requirements necessary for the protection of the karst aquifers while still allowing for present and future human activities is difficult – but not impossible – to achieve. One good example is the present highway with a closed dewatering system and waste water treatment before the water passes into the karst underground system.     

Mesoscale and macroscale aspects of the morning Urban Heat Island around Athens,Greece

Summary This paper examines the characteristics of the morning Urban Heat Island (UHI) in Athens basin, Greece. The study is performed by using and analyzing mesoscale and synoptic data covering the period 1990–2001. The UHI was estimated using the 0600 Local Time (LT) minimum temperature differences between rural and urban areas of the city. The analysis results in 7 UHI classes. A strong UHI was found for the 1/3 of days. The specific meteorological characteristics (surface and upper air, cooling rate) of each UHI class were revealed and examined. The spatial and temporal characteristics of the UHI were also identified. The UHI is largest on nights with clear skies and low relative humidity. In all seasons the UHI switches on rapidly in afternoon. During spring and summer, sea breeze commonly reduces and delays the UHI. Cases documenting the sensitivity and rapidity of changes of the UHI to changes in classes (cloud cover, wind) are also presented. The cooling rate is higher in the urban area under negative and lower under positive UHI conditions. Mesoscale and macroscale phenomena were examined during the different UHI classes through a weather type scheme. It was emerged that high UHI classes are associated with anticyclonic conditions or advection in the lower troposphere, while low UHI classes are associated with strong northeasterly winds. Anticyclonic conditions which frequently occur in spring and early summer, reduce or reverse the UHI to Urban Cooling Island.     

A constitutive model for mechanical and chemo‐mechanical compaction in sedimentary basins and finite element analysis

Compaction and associated fluid flow are fundamental processes in sedimentary basin deformation. Purely mechanical compaction originates mainly from pore fluid expulsion and rearrangement of solid particles during burial, while chemo‐mechanical compaction results from Intergranular Pressure‐Solution (IPS) and represents a major mechanism of deformation in sedimentary basins during diagenesis. The aim of the present contribution is to provide a comprehensive 3D framework for constitutive and numerical modeling of purely mechanical and chemo‐mechanical compaction in sedimentary basins. Extending the concepts that have been previously proposed for the modeling of purely mechanical compaction in finite poroplasticity, deformation by IPS is addressed herein by means of additional viscoplastic terms in the state equations of the porous material. The finite element model integrates the poroplastic and poroviscoplastic components of deformation at large strains. The corresponding implementation allows for numerical simulation of sediments accretion/erosion periods by progressive activation/deactivation of the gravity forces within a fictitious closed material system. Validation of the numerical approach is assessed by means of comparison with closed‐form solutions derived in the context of a simplified compaction model. The last part of the paper presents the results of numerical basin simulation performed in one dimensional setting, demonstrating the ability of the modeling to capture the main features in elastoplastic and viscoplastic compaction. Copyright © 2016 John Wiley & Sons, Ltd.     

The First Results of U–Pb Isotope Dating of Detrital Zircons from the Upper Mesoproterozoic Gulliksenfellet Quartzite (Southern Part of Wedel Jarlsberg Land,Southwest Spitsbergen)

The first results of U–Pb isotopic dating (LA–ICP–MS) of detrital zircons from metasedimentary rocks of the pre-Devonian basement of the SW part of western Spitsbergen (from Upper Mezoproterozoic Gulliksenfellet quartzite) showed ages ranging from 1700 ± 25 to 2948 ± 27 Ma.     

Measuring proton energies and fluxes using EIT (SOHO) CCD areas outside the solar disk images

An indirect proton flux measuring tool based on discrimination of the energy deposited by protons in 128 × 128 pixel EIT CCD areas outside the solar disk images is presented. Single pixel intensity events are converted into proton incident energy flux using modeled energy deposition curves for angles of incidence ±60° in four EIT spatial areas with different proton stopping power. The extracted proton flux is corrected for both the loss of one‐pixel events in the range of angles of incidence as well as for the contribution to the single pixel events resulting from scattered middle‐energy protons (low‐energy or high‐energy particles are stopped by the EIT components or pass through them, accordingly). A simple geometrical approach was found and applied to correct for a non‐unique relation between the proton‐associated CCD output signal and the incident proton energy. With this geometrical approximation four unique proton incident energy ranges were determined as 45–49, 145–154, 297–335, and 390–440 MeV. The indirect proton flux measuring tool has been tested by comparing Solar Energetic Particles (SEP) flux temporal profiles extracted from the EIT CCD frames and downloaded from the GOES database for the Bastille Day (BD) of 2000 July 14 and the more recent 2005 January 20 events. The SEP flux temporal profiles and proton spectra extracted from the EIT in the relatively narrow energy ranges between 45 and 440 MeV reported here are consistent with the related GOES profiles. The four additional EIT extracted ranges provide higher energy resolution of the SEP data. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Search for spatial variation in the jovian N/N ratio from Cassini/CIRS observations

We have used the spectra obtained by the Composite Infrared Spectrometer (CIRS) onboard the Cassini spacecraft to search for latitudinal variation in the ¹⁵N/¹⁴N ratio on Jupiter. We found no variations statistically significant given the observational and model uncertainties. The absence of latitudinal variations demonstrates that ¹⁵NH₃ is not fractionated in Jupiter's atmosphere, and that the measured ¹⁵N/¹⁴N represents Jupiter's global value. Our mean value for the global jovian ¹⁵N/¹⁴N ratio of (2.22±0.52)×10⁻³ agrees with previous measurements made by Fouchet et al. (2000, Icarus 143, 223-243) and Owen et al. (2001, Astrophys. J. 553, L77-L79). We argue that the jovian isotopic ¹⁵N/¹⁴N ratio must represent the solar nitrogen isotopic composition. The solar ¹⁵N/¹⁴N ratio hence significantly differs from the terrestrial value: (¹⁵N/¹⁴N)_⊕=3.68×10⁻³. This supports the proposition that terrestrial nitrogen originates from a nitrogen reservoir isolated from the main nitrogen reservoir in the proto-solar nebula. The origin and carrier of this isolated reservoir are still unknown.     

The influence of minerals on the pyrolysis of kerogens

The effect of mineral matter on the laboratory pyrolysis of sediments, kerogens and coals, and of coal macerals mixed with either alumina, bentonite, kaolinite, or calcium carbonate has been investigated. Some minerals are more active than others in effecting changes in the composition of the pyrolysate. The relative content of low molecular weight pyrolysis products is higher for kerogens pyrolyzed in a mineral matrix than for isolated kerogens. Our limited data suggests that this is due to both condensation and gasification of higher molecular weight constituents in the ‘primary’ pyrolysate. Differences in the content of aromatic versus aliphatic compounds have been noted when pyrograms from coal macerals are compared with pyrograms from coal maceral-mineral mixtures. We conclude that mineralogy is important in controlling the composition of kerogen pyrolysis products.     

EVIDENCE FOR THE PRESENCE OF LOW MOLECULAR WEIGHT ALCOHOLS AND CARBONYL COMPOUNDS IN THE MURCHISON METEORITE†

Alcohols, aldehydes and ketones identified in the Murchison C2 chondrite include: methanol, ethanol, 2-propanol, butyl alcohols, formaldehyde, acetaldehyde, propionaldehyde, acetone, 2-butanone, 3-pentanone and 2-pentanone.