A modified DRASTIC model for Siting Confined Animal Feeding Operations in Williams County,Ohio, USA

Three of DRASTIC’s parameters (Depth to Water, Soil Media, and Topography) were modified and another parameter was added (land use/land cover) to the model to determine the potential impact on groundwater from Confined Animal Feeding Operations (CAFO) manure lagoon settings and manure application as fertilizer. Williams County is a mostly agricultural county located in northwest Ohio, USA. It currently has three CAFOs, all dairy, with the possibility of the construction of a multi-million chicken egg CAFO in the near future. A Geographic Information System (GIS) was utilized to modify the Ohio Department of Natural Resources (ODNR) DRASTIC map for the county to fully assess the county-wide pollution potential of CAFOs. The CAFO DRASTIC map indicates that almost half of Williams County has elevated groundwater pollution potential. The rest of the county, primarily the southeast corner, has lower CAFO groundwater pollution potential. Future CAFO development within the county should focus on the southeastern portion of the county where the groundwater table is deeper, and the aquifer is composed of shale substrate with low hydraulic conductivity. The CAFO DRASTIC results are intended to be used as a screening tool and are not to replace site-specific hydrogeologic investigations.     

Quick-look assessments to identify optimal CO2 EOR storage sites

A newly developed, multistage quick-look methodology allows for the efficient screening of an unmanageably large number of reservoirs to generate a workable set of sites that closely match the requirements for optimal CO₂ enhanced oil recovery (EOR) storage. The objective of the study is to quickly identify miscible CO₂ EOR candidates in areas that contain thousands of reservoirs and to estimate additional oil recovery and sequestration capacities of selected top options through dimensionless modeling and reservoir characterization. Quick-look assessments indicate that the CO₂ EOR resource potential along the US Gulf Coast is 4.7 billion barrels, and CO₂ sequestration capacity is 2.6 billion metric tons. In the first stage, oil reservoirs are screened and ranked in terms of technical and practical feasibility for miscible CO₂ EOR. The second stage provides quick estimates of CO₂ EOR potential and sequestration capacities. In the third stage, a dimensionless group model is applied to a selected set of sites to improve the estimates of oil recovery and storage potential using appropriate inputs for rock and fluid properties, disregarding reservoir architecture and sweep design. The fourth stage validates and refines the results by simulating flow in a model that describes the internal architecture and fluid distribution in the reservoir. The stated approach both saves time and allows more resources to be applied to the best candidate sites.     

Potential for localized groundwater contamination in a porous pavement parking lot setting in Rhode Island

The control of polluted surface runoff and the assessment of possible impacts on groundwater is a concern at the local and regional scale. On this background, a study investigates possible impacts of organic and inorganic pollutants (including bacteria) originating from a permeable asphalt parking lot on the water quality immediately beneath it. The functioning of the permeable pavement, including clogging and restricted vertical percolation, was also evaluated. Four nested sample ports (shallow and deep) were installed below low- and high-traffic areas, including one port outside the parking lot. At least initially there was a good hydraulic connection between the parking surface and the shallow sample ports. The presence of a geotextile layer at the base of the parking lot structure, however, was identified in lab tests as one factor restricting vertical percolation to the deeper ports. Clogging of the permeable surface was most pronounced in heavy traffic areas and below snow pile storage areas. Corroborated by high electric conductivity and chloride measurements, sand brought in by cars during winter was the principal cause for clogging. No bacteria or BOD were found in percolating water. Polycyclic aromatic hydrocarbons (PAH) were present at concentrations near minimum detection limit. Nutrients (nitrate and phosphate) were being leached into the ground via the permeable parking lot surface at annual flux rates of 0.45–0.84 g/m²/year. A multi-species tracer test demonstrated a retention capacity of the permeable parking lot structure of >90% for metals and 27% for nutrients, respectively.     

The relationship between hydrodynamic properties and weathering of soils derived from volcanic rocks,Galapagos Islands (Ecuador)

The aim of this interdisciplinary study is to examine a component of the hydrological cycle in Galapagos by characterizing soil properties. Nine soil profiles were sampled on two islands. Their physical and hydrodynamic properties were analyzed, along with their mineralogical composition. Two groups of soils were identified, with major differences between them. The first group consists of soils located in the highlands (>350 m a.s.l.), characterized by low hydraulic conductivity (<10⁻⁵ m s⁻¹) and low porosity (<25%). These soils are thick (several meters) and homogeneous without coarse components. Their clay fraction is considerable and dominated by gibbsite. The second group includes soils located in the low parts of the islands (<300 m a.s.l.). These soils are characterized by high hydraulic conductivity (>10⁻³ m s⁻¹) and high porosity (>35%). The structure of these soils is heterogeneous and includes coarse materials. The physical properties of the soils are in good agreement with the variations of the rainfall according to the elevation, which appears as the main factor controlling the soil development. The clayey alteration products constrain soils physical and hydrodynamic properties by reducing the porosity and consequently the permeability and also by increasing water retention.     

Groundwater recharge of carbonate aquifers of the Silesian-Cracow Triassic (southern Poland) under human impact

A Triassic carbonate unit has been intensively drained by zinc and lead ore mines and numerous borehole fields since the nineteenth century. Its groundwater recharge has increased due to: pumping of water from boreholes, mining activity, and urbanization. An approach to determine the amounts of the recharge at a variety of spatial scales is presented in the paper. Different methods were used to identify and quantify recharge components on a regional and local scale: mathematical modelling was performed for four aquifers included in an aquifer system, an analytical estimation based on the assumption that an average recharge is equal to the average discharge of the hydrogeological system—for six man-made drainage centres, and the method of water level fluctuation (WLF) was applied in one observation borehole. Results of modelling have been supplemented by observation of environmental tracers (δ¹⁸O, δ²H, ³H), noble gases temperatures, and ⁴He_exc in groundwater. The regional aquifer’s current recharge according to estimations performed by means of modelling varies from 39 to 101 mm/year on average. Depending on the aquifer site the average precipitation ranges from 779 to 864 mm/year. In the confined part of the aquifer average recharge ranges from 26 to 61 mm/year. Within outcrops average recharge varies from 96 to 370 mm/year. Current recharge estimated by the analytical method for man-made drainage centres varies from 158 up to 440 mm/year. High values are caused by different recharge sources like precipitation, induced leakage from shallow aquifers, and water losses from streams, water mains and sewer systems. Pumping of water, mining and municipal activities constitute additional factors accounting for the intensified recharge.     

Design of shallow foundations under tensile loading for transmission line towers: An overview

Tensioned foundations are common in civil engineering applications such as transmission towers, harbors, offshore structures, basement slabs under pressure, industrial equipment, etc. Procedures for the design of tensioned foundations are discussed in this paper, including specific recommendations for more common transmission tower foundations. Starting from a distinction between shallow and deep modes of failure, the paper presents the most common failure mechanisms for shallow failure in tension, including procedures for calculation of foundation tensile capacity under vertical and inclined loading. Emphasis is given to the influence of the strength of the compacted backfill compared to the strength of the natural soil, including presentation of results of full-scale loading tests.     

Saturation of groundwaters with respect to minerals of the host rocks

Calculations of the saturation of groundwaters with respect to minerals of the rocks hosting these waters indicate that most of the analyzed groundwaters were saturates with respect to calcite, dolomite, and quartz. Brines of chloride-calcic composition were determined to be saturated with respect to calcite, whereas brines of chloride-sodic composition are saturated with respect to dolomite and quartz. The solution was simultaneously saturated with respect to six minerals for the association ankerite-calcite-dolomite-pyrite-quartz-strontianite. An increase in the number of minerals with respect to which solution is saturated is correlated with an increase in the diversity of types of groundwaters and an increase in the runoff rate. The paper proposes possible avenues for searches for relations between hydrogeological and geochemical parameters that make it possible to adapt the thermodynamic models to real geological-hydrogeological conditions. The research was centered on the testing of groundwaters for their saturation with respect to minerals of the rocks hosting these waters. This parameter plays a significant part in forming the geochemical type of natural waters because it reflects the crystallization of a mineral from a solution and, consequently, the removal of an element from the aqueous solution.     

The Ca-Eskola component in eclogitic clinopyroxene as a function of pressure, temperature and bulk composition: an experimental study to 15 GPa with possible implications for the formation of oriented SiO2-inclusions in omphacite

Experiments have been conducted in the P-T range 2.5–15 GPa and 850–1,500°C using bulk compositions in the systems SiO₂–TiO₂–Al₂O₃–Fe₂O₃–FeO–MnO–MgO–CaO–Na₂O–K₂O–P₂O₅ and SiO₂–TiO₂–Al₂O₃–MgO–CaO–Na₂O to investigate the Ca-Eskola (CaEs Ca_0.5□_0.5AlSi₂O₆) content of clinopyroxene in eclogitic assemblages containing garnet + clinopyroxene + SiO₂ ± TiO₂ ± kyanite as a function of P, T, and bulk composition. The results show that CaEs_ss in clinopyroxene increases with increasing T and is strongly bulk composition dependent whereby high CaEs-contents are favoured by bulk compositions with high normative anorthite and low diopside contents. In this study, a maximum of 18 mol% CaEs_ss was found at 6 GPa and 1,350°C in a kyanite-eclogite assemblage garnet + clinopyroxene + kyanite + rutile + coesite. By comparison, no significant increase in CaEs_ss with increasing P could be observed. If the formation of oriented SiO₂-rods frequently observed in eclogititc clinopyroxenes is due to the retrogressive breakdown of a CaEs-component then these textures are a cooling rather than a decompression phenomenon and are most likely to be found in kyanite-bearing eclogites cooled from temperatures ≥750°C. The presence of clinopyroxene with approx. 4 mol% CaEs_ss in an experiment conducted at 2.5 GPa/850°C confirms earlier suggestions based on field data that vacancy-rich clinopyroxenes are not necessarily restricted to ultrahigh pressure metamorphic conditions. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Quantitative textural analysis of packings of elongate crystals

The spatial distribution of grains in a solidifying igneous rock controls the physical properties of the crystal mush, and in turn is controlled by the rate of crystal growth and accumulation. A predominant non-spherical habit for igneous minerals brings into question the use of spherical particles in reference packings used for quantification of spatial distribution. Furthermore, variations of crystal clustering/ordering with length scale require spatial statistics which take into account the distribution of particles beyond nearest neighbours. Using random close packings of spherocylinders, we demonstrate the importance of aspect ratio for the aggregation index (usually known as R) and show that packings of spherical particles have more structure than packings of rods. The spatial distribution functions demonstrate that the plagioclase grains in the colonnade from the Holyoke basalt are clustered on a length scale of 0.5 mm. Understanding the controls on grain spatial distribution in igneous rocks will depend on the application of these techniques to well-understood environments.     

Basaltic explosive volcanism: Constraints from deposits and models

Basaltic pyroclastic volcanism takes place over a range of scales and styles, from weak discrete Strombolian explosions (～10²–10³ kg s^?1) to Plinian eruptions of moderate intensity (10⁷–10⁸ kg s^?1). Recent well-documented historical eruptions from Etna, Kīlauea and Stromboli typify this diversity. Etna is Europe's largest and most voluminously productive volcano with an extraordinary level and diversity of Strombolian to subplinian activity since 1990. Kīlauea, the reference volcano for Hawaiian fountaining, has four recent eruptions with high fountaining (>400 m) activity in 1959, 1960, 1969 (–1974) and 1983–1986 (–2008); other summit (1971, 1974, 1982) and flank eruptions have been characterized by low fountaining activity. Stromboli is the type location for mildly explosive Strombolian eruptions, and from 1999 to 2008 these persisted at a rate of ca. 9 per hour, briefly interrupted in 2003 and 2007 by vigorous paroxysmal eruptions. Several properties of basaltic pyroclastic deposits described here, such as bed geometry, grain size, clast morphology and vesicularity, and crystal content are keys to understand the dynamics of the parent eruptions.The lack of clear correlations between eruption rate and style, as well as observed rapid fluctuations in eruptive behavior, point to the likelihood of eruption style being moderated by differences in the fluid dynamics of magma and gas ascent and the mechanism by which the erupting magma fragments. In all cases, the erupting magma consists of a mixture of melt and gaseous bubbles. The depth and rate of degassing, melt rheology, bubble rise and coalescence rates, and extent of syn-eruptive microlite growth define complex feedbacks that permit reversible shifts between fragmentation mechanisms and in eruption style and intensity. However, many basaltic explosive eruptions end after an irreversible shift to open-system outgassing and microlite crystallization in melt within the conduit.Clearer understanding of the factors promoting this diversity of basaltic pyroclastic eruptions is of fundamental importance in order to improve understanding of the range of behaviors of these volcanoes and assess hazards of future explosive events at basaltic volcanoes. The three volcanoes used for this review are the sites of large and growing volcano-tourism operations and there is a public need both for better knowledge of the volcanoes’ behavior and improved forecasting of the likely course of future eruptions.