Photometry of pluto in the last decade and before: evidence for volatile transport?

Photometric observations of Pluto in the BVR filter system were obtained in 1999 and in 1990-1993, and observations in the 0.89-μm methane absorption band were obtained in 2000. Our 1999 observations yield lightcurve amplitudes of 0.30 ± 0.01, 0.26 ± 0.01, and 0.21 ± 0.02 and geometric albedos of 0.44 ± 0.04, 0.52 ± 0.03, and 0.58 ± 0.02 in the B, V, and R filters, respectively. The low-albedo hemisphere of Pluto is slightly redder than the higher albedo hemisphere. A comparison of our results and those from previous epochs shows that the lightcurve of Pluto changes substantially through time. We developed a model that fully accounts for changes in the lightcurve caused by changes in the viewing geometry between the Earth, Pluto, and the Sun. We find that the observed changes in the amplitude of Pluto’s lightcurve can be explained by viewing geometry rather than by volatile transport. We also discovered a measurable decrease since 1992 of ∼0.03 magnitudes in the amplitude of Pluto’s lightcurve, as the model predicts. Pluto’s geometric albedo does not appear to be currently increasing, as our model predicts, although given the uncertainties in both the model and the measurements of geometric albedo, this result is not firm evidence for volatile transport. The maximum of methane-absorption lightcurve occurs near the minimum of the BVR lightcurves. This result suggests that methane is more abundant in the brightest regions of Pluto. Pluto’s phase coefficient exhibits a color dependence, ranging from 0.037 ± 0.01 in the B filter to 0.032 ± 0.01 in the R filter. Pluto’s phase curve is most like those of the bright, recently resurfaced satellites Triton and Europa. Although Pluto shows no strong evidence for volatile transport now (unlike Triton), it is important to continue to observe Pluto as it moves away from perihelion.     

Mesoscale linear streaks on Mars: environments of dust entrainment

Variable surface albedo features on Mars are likely caused by the entrainment and deposition of dust by the wind. Most discrete markings are associated with topographic forms or with regional slopes that serve to alter the effective wind shear stress on the surface. Some of the largest variable features, here termed mesoscale linear streaks, are up to 400 km in length and repeatedly occur in one of the smoothest regions of Mars: Amazonis Planitia. Their orientations and apparent season of variability as observed by Viking and Mars Orbiter cameras indicate linear streak formation by enhanced surface wind stresses during regional or local dust storms and during the initial stages of global dust storms. They provide an example of the ability of large-scale winds, without significant local enhancement, to initiate dust motion on Mars. The sizes and spacing of the linear streaks may be controlled by boundary layer rolls. The repetitive formation of these streaks, over a span of more than 11 Mars years, gives one measure of the stability of Mars’ eolian processes.     

Comet Hale-Bopp (C/1995 O1): UVSTAR-FUV Spectroscopy from the Space Shuttle

We report here on unique post-perihelion (2.3 AU) measurements of Comet Hale-Bopp in the FUV-range (950–1250 Å) by means of the UVSTAR spectrometer from the space shuttle with the main purpose of searching for argon and other FUV emitters. New methods for separating the strong airglow emission at shuttle altitudes are here discussed in detail. Due to our low resolution (15 Å) and S/N ratio the possible rocket-borne detection of argon near perihelion (0.9 AU) could not be confirmed. New species as N₂ are suspected but difficult to separate from the strong airglow emission at shuttle altitudes. From the Lyα brightness (1.30± 0.08 kRy) a water production rate Q = 5.9 ± 0.4 × 10²⁹ molecules s^?1 could be derived and compared with other post-perihelion observations.     

In-Orbit Vignetting Calibrations of XMM-Newton Telescopes

We describe measurements of the mirror vignetting in the XMM-Newton Observatory made in-orbit, using observations of SNR G21.5-09 and SNR 3C58 with the EPIC imaging cameras. The instrument features that complicate these measurements are briefly described. We show the spatial and energy dependences of measured vignetting, outlining assumptions made in deriving the eventual agreement between simulation and measurement. Alternate methods to confirm these are described, including an assessment of source elongation with off-axis angle, the surface brightness distribution of the diffuse X-ray background, and the consistency of Coma cluster emission at different position angles. A synthesis of these measurements leads to a change in the XMM calibration data base, for the optical axis of two of the three telescopes, by in excess of 1 arcmin. This has a small but measureable effect on the assumed spectral responses of the cameras for on-axis targets. This revised version was published online in July 2006 with corrections to the Cover Date.     

Observations of SN1988A with the faint object spectrograph on the 4.2 m William Herschel Telescope

We present two spectra of the supernova SN1988A in M58 (NGC4579) over the wavelength range 4000–9700 Å, as recorded by the Faint Object Spectrograph on the 4.2 m William Herschel Telescope at the Observatorio del Roque de los Muchachos. We conclude that SN1988A was a type II supernova.     

Investigation of ion beam techniques for the analysis and exposure of particles encapsulated by silica aerogel: Applicability for Stardust

Abstract— In 2006, the Stardust spacecraft will return to Earth with cometary and perhaps interstellar dust particles embedded in silica aerogel collectors for analysis in terrestrial laboratories. These particles will be the first sample return from a solid planetary body since the Apollo missions. In preparation for the return, analogue particles were implanted into a keystone of silica aerogel that had been extracted from bulk silica aerogel using the optical technique described in Westphal et al. (2004). These particles were subsequently analyzed using analytical techniques associated with the use of a nuclear microprobe. The particles have been analyzed using: a) scanning transmission ion microscopy (STIM) that enables quantitative density imaging; b) proton elastic scattering analysis (PESA) and proton backscattering (PBS) for the detection of light elements including hydrogen; and c) proton‐induced X‐ray emission (PIXE) for elements with Z > 11. These analytical techniques have enabled us to quantify the composition of the encapsulated particles. A significant observation from the study is the variable column density of the silica aerogel. We also observed organic contamination within the silica aerogel. The implanted particles were then subjected to focused ion beam (FIB) milling using a 30 keV gallium ion beam to ablate silica aerogel in site‐specific areas to expose embedded particles. An ion polished flat surface of one of the particles was also prepared using the FIB. Here, we show that ion beam techniques have great potential in assisting with the analysis and exposure of Stardust particles.     

Flexure of Europa's lithosphere due to ridge-loading

Using photoclinometry, topographic profiles across europan ridges have been produced. These profiles allow the identification of bulges in the terrain adjacent to the ridges. The bulges are assumed to have been produced by flexure of the elastic lithosphere due to the load of the ridges, which lie along cracks in the crust. The distance from the crack to these “fore-bulges” depends on the thickness of the elastic plate being flexed. Based on a survey of ridges in Galileo images with resolution <300 m/pixel, the thickness of the elastic lithosphere has been determined by this method at a wide variety of sites along the leading and trailing hemispheres of Europa. The average thickness is about 200 m. The elastic lithosphere underneath smooth dilational bands tends to be thicker than plains morphology, an effect that is pronounced at Thynia Linea and Astypalaea Linea. Among the ridges investigated here, more recent loading correlates with a thicker elastic lithosphere, which may either reflect an intrinsically thicker layer, or less viscous relaxation over the shorter time period.     

Seasonal variations in prey selection by estuarine black-headed gulls (Larus ridibundus)

The number of black-headed gulls (Larus ridibundus) in the Clyde Estuary is large. In summer the average density has reached 1350 gulls km^?2 and in winter 180 gulls km^?2. This paper compares prey selection and feeding efficiency in gulls during summer and winter on tidal flats, and considers how seasonal differences may be adaptations to cope with seasonal changes in prey availability.Gross and net rates of energy intake were highest in summer because gulls captured more of the polychaete N. diversicolor than the amphipod C. volutator. In winter, gulls selected for C. volutator and therefore an energetically less profitable diet. Throughout the year gulls selected more C. volutator relative to N. diversicolor than expected on energetic grounds and so apparently did not maximize potential net rate of energy intake.Gulls used three techniques to capture prey and made most intensive use of the ‘crouch’ technique. Crouching gulls attained a much higher net rate of energy intake than ‘upright’ or ‘paddling’ gulls.A log-linear model showed that (a) season, water depth and gull density determined feeding technique and (b) feeding technique and season independently determined foraging success and prey selection. Thus gull density and water depth acted on prey selection through imposed variations in feeding technique.Reasons for gulls selecting energetically unprofitable C. volutator and for the use of several distinct feeding techniques are discussed.