Estimation of standing stock of chlorophylla and primary production from remote-sensed ocean color in the Oyashio region, the Western subarctic Pacific, during the spring bloom in 1997

In order to examine the applicability of remotely-sensed ocean color for the estimation of phytoplankton biomass and primary production in the Oyashio region, the western subarctic Pacific, vertical distributions of chlorophylla concentration and primary production were observed in April and May 1997. Spring bloom was observed in both April and May, and the surface concentration of chlorophylla exceeded 40 mg m⁻³. The relationship between the standing stocks of chlorophylla within the layer from the sea surface to one optical depth (0–1/k layer) and the surface chlorophylla concentration is expressed as a Michaelis-Menten equation. The mean ratio of the standing stock of chlorophylla in the euphotic layer to that in the 0–1/k layer was 4.41, this ratio did not significantly differ from 4.61 which was obtained at homogeneous distribution of chlorophylla within the euphotic layer. These facts suggest that the distribution of chlorophylla could be assumed to be homogeneous in the euphotic layer during the spring bloom. Results of primary production measurements by simulatedin situ method were compared with those by an algorithm with two variables; chlorphylla and non-spectral PAR. Daily primary production in the euphotic layer estimated by the algorithm varied in a range of 38–274% of that estimated by incubation, although the primary productions by the algorithm agreed with those by the incubation at a half of stations. Primary production within the euphotic layer calculated using simply the surface data was the same as that estimated using vertical distribution of chlorophylla. These results show that the primary production in the euphotic layer may be estimated from the remote sensed measurements during the spring bloom in the Oyashio region.     

K–Ar ages of the Akan-Shiretoko volcanic chain lying oblique to the Kurile trench: Implications for tectonic control of volcanism

The Akan‐Shiretoko volcanic chain, situated in the Southwestern Kurile arc, consists mainly of nine subaerial andesitic stratovolcanoes and three calderas. The chain extends in a SW–NE direction for 200 km, situated oblique to the Kurile trench at an angle of 25 degrees. Thirty‐seven new K–Ar ages, plus previous data, suggest that volcanic activity along the Akan‐Shiretoko volcanic chain began at ca 4 Ma at Akan, at the southwestern end of the chain, and systematically progressed northeastward, resulting in the southwest‐northeast‐trending volcanic chain. This spatial and temporal distribution of volcanoes can be explained by anticline development advancing northeastward from the Akan area, accompanied by magma rising through northeast‐trending fractures that developed along the anticlinal axis. The northeastward development of the anticline caused uplifting of the Akan‐Shiretoko area and changed the area from submarine to subaerial conditions. Anticline formation was likely due to deformation of the southwestern Kurile arc, with southwestward migration of the Kurile forearc sliver caused by oblique subduction of the Pacific plate. The echelon topographic arrangement of the Shiretoko, Kunashiri, Etorofu and Urup was formed at ca 1 Ma.     

Strain and tilt changes measured during a water injection experiment at the Nojima Fault zone, Japan

Abstract In order to make geophysical and geological investigations of the Nojima Fault on Awaji Island, Japan, three boreholes measuring 1800 m, 800 m and 500 m deep were drilled into the fault zone. The fault is one of the seismic source faults of the 1995 Hyogo-ken Nanbu earthquake of M 7.2. A new multicomponent borehole instrument was installed at the bottom of the 800 m borehole and continuous observations of crustal strain and tilt have been made using this instrument since May 1996. A high-pressure water injection experiment within the 1800 m borehole was done in February and March 1997 to study the geophysical response, behavior, permeability, and other aspects of the fault zone. The injection site was located approximately 140 m horizontally and 800 m vertically from the instrument. Associated with the water injection, contraction of approximately 0.7 × 10⁻⁷ str (almost parallel to the fault) and tilt of approximately 1 × 10^-7 rad in the sense of upheaval toward the injection site were observed. In addition to these controlled experiments, the strainmeter and tiltmeter also recorded daily variations. We interpret strain and tilt changes to be related to groundwater discharge and increased ultra-micro seismicity induced by the injected water.     

Evolution of Mount Fuji,Japan: Inference from drilling into the subaerial oldest volcano,pre‐Komitake

A buried, old volcanic body (pre‐Komitake Volcano) was discovered during drilling into the northeastern flank of Mount Fuji. The pre‐Komitake Volcano is characterized by hornblende‐bearing andesite and dacite, in contrast to the porphyritic basaltic rocks of Komitake Volcano and to the olivine‐bearing basaltic rocks of Fuji Volcano. K‐Ar age determinations and geological analysis of drilling cores suggest that the pre‐Komitake Volcano began with effusion of basaltic lava flows around 260 ka and ended with explosive eruptions of basaltic andesite and dacite magma around 160 ka. After deposition of a thin soil layer on the pre‐Komitake volcanic rocks, successive effusions of lava flows occurred at Komitake Volcano until 100 ka. Explosive eruptions of Fuji Volcano followed shortly after the activity of Komitake. The long‐term eruption rate of about 3 km³/ka or more for Fuji Volcano is much higher than that estimated for pre‐Komitake and Komitake. The chemical variation within Fuji Volcano, represented by an increase in incompatible elements at nearly constant SiO₂, differs from that within pre‐Komitake and other volcanoes in the northern Izu‐Bonin arc, where incompatible elements increase with increasing SiO₂. These changes in the volcanism in Mount Fuji may have occurred due to a change in regional tectonics around 150 ka, although this remains unproven.     

The social and political complexities of learning in carbon capture and storage demonstration projects

Demonstration of a fully integrated power plant with carbon capture and storage (CCS) at scale has not yet been achieved, despite growing international political interest in the potential of the technology to contribute to climate change mitigation and calls from multiple constituents for more demonstration projects. Acknowledging the scale of learning that still must occur for the technology to advance towards deployment, multiple CCS demonstration projects of various scales are emerging globally. Current plans for learning and knowledge sharing associated with demonstration projects, however, seem to be limited and narrowly conceived, raising questions about whether the projects will deliver on the expectations raised. Through a comparison of the structure, framing and socio-political context of three very different CCS demonstration projects in different places and contexts, this paper explores the complexity of social learning associated with demonstration projects. Variety in expectations of the demonstration projects’ objectives, learning processes, information sharing mechanisms, public engagement initiatives, financing and collaborative partnerships are highlighted. The comparison shows that multiple factors including the process of building support for the project, the governance context and the framing of the project matter for the learning in demonstration projects. This analysis supports a broader conceptualization of learning than that currently found in CCS demonstration plans - a result with implications for both future research and practice.     

Methods for detecting apparent differences between spatial tessellations at different time points

This paper proposes methods for detecting apparent differences between spatial tessellations at two different points in time, with the objective of conflation of spatial tessellations at multiple time points. The methods comprise three steps. First, we eliminate systematic differences between tessellations using the affine transformation. Second, we match subregions between tessellations at two points in time and match boundaries based on matching relationships between the subregions. Third, we propose a distance metric for measuring differences between the matched boundaries and a method for determining whether the measured differences are apparent or not. We apply the proposed methods to a part of the US Census data for 1990 and 2000 and empirically demonstrate the effectiveness of these methods.     

Intra-oceanic island arc origin for Iratsu eclogites of the Sanbagawa belt,central Shikoku,southwest Japan

New geochemical and Sr–Nd isotopic data for the Iratsu eclogite and surrounding metamorphic rocks of the Sanbagawa belt, Japan, show that, while the protoliths of the metamorphic rocks formed in a variety of tectonic settings, the Iratsu body represents a deeply subducted and accreted island arc. The igneous protoliths of eclogites and garnet amphibolites were probably generated from a mantle source that had components of both a depleted mantle modified by slab-released fluid (as seen in a negative Nb anomaly) and an enriched mantle, similar to that of ocean island basalts (OIB). Fractional crystallization modeling indicates that the protoliths of some garnet clinopyroxenites from the Iratsu body are cumulates from a basaltic magma that crystallized under high O₂ and H₂O fugacities in the middle to lower crust. The source characteristics and crystallization conditions suggest that the protoliths of the Iratsu rocks formed in an oceanic island arc. Quartz eclogites from the marginal zone of the Iratsu body have geochemical signatures similar to turbidites from the Izu–Bonin island arc (as seen in a negative Nb anomaly and a concave REE pattern). The protoliths might be volcaniclastic turbidites that formed in a setting proximal to the oceanic island arc. Geochemical and isotopic signatures of the surrounding mafic schists are similar to normal (N-) and enriched (E-) mid-ocean-ridge basalt (MORB), and distinct from the rocks from the Iratsu body. The protoliths of the mafic schists likely formed in a plume-influenced mid-ocean ridge or back-arc basin. Pelitic schists from the surrounding rocks and pelitic gneisses from the marginal zone of the Iratsu body have evolved, continental geochemical signatures (as seen in a negative ε_Nd(t) value (~?5)), consistent with their origin as continent-derived trench-fill turbidites.     

Mesozoic radiolarians and radiolarian-bearing sequences in the circum-Pacific regions: A report of the symposium-'Radiolarians and Orogenic Belts'

Abstract This paper contains extended abstracts of the seven papers presented at the symposium 'Radiolarians and Orogenic Belts' held at the seventh meeting of the International Association of Radiolarian Paleontologists (INTERRAD). Important results of the symposium include the following: (1) Upper Paleozoic and Mesozoic cherts are widely distributed within accretionary complexes in the circum-Pacific orogenic belt. Radiolarian dating reveals that long durations of chert sedimentation in a pelagic environment are recorded on both sides of Pacific-rim accretionary complexes (e.g. New Zealand, Japan, Russian Far East, Canadian Cordillera). (2) Triassic radiolarian faunas from New Zealand and the Omolon Massif, northeast Siberia are similar in composition and are characterized by the absence of typical Tethyan elements. This suggests that radiolarian faunal provincialism may have been established as early as the Triassic. High-latitude radiolarian taxa exhibit a bi-polar distribution pattern. (3) The Lower Triassic interval in chert dominant pelagic sequences is mechanically weaker than other levels and acted as a décollement in accretionary events. This lithologic. contrast in physical property is considered to reflect radiolarian evolution, such as the end-Permian mass extinction.