Comprehensive seismic hazard assessment of Tripura and Mizoram states

Northeast India is one of the most highly seismically active regions in the world with more than seven earthquakes on an average per year of magnitude 5.0 and above. Reliable seismic hazard assessment could provide the necessary design inputs for earthquake resistant design of structures in this region. In this study, deterministic as well as probabilistic methods have been attempted for seismic hazard assessment of Tripura and Mizoram states at bedrock level condition. An updated earthquake catalogue was collected from various national and international seismological agencies for the period from 1731 to 2011. The homogenization, declustering and data completeness analysis of events have been carried out before hazard evaluation. Seismicity parameters have been estimated using G–R relationship for each source zone. Based on the seismicity, tectonic features and fault rupture mechanism, this region was divided into six major subzones. Region specific correlations were used for magnitude conversion for homogenization of earthquake size. Ground motion equations (Atkinson and Boore 2003; Gupta 2010) were validated with the observed PGA (peak ground acceleration) values before use in the hazard evaluation. In this study, the hazard is estimated using linear sources, identified in and around the study area. Results are presented in the form of PGA using both DSHA (deterministic seismic hazard analysis) and PSHA (probabilistic seismic hazard analysis) with 2 and 10% probability of exceedance in 50 years, and spectral acceleration (T = 0. 2 s, 1.0 s) for both the states (2% probability of exceedance in 50 years). The results are important to provide inputs for planning risk reduction strategies, for developing risk acceptance criteria and financial analysis for possible damages in the study area with a comprehensive analysis and higher resolution hazard mapping.     

kHz QPOs in LMXBs, relations between different frequencies and compactness of stars

We suggest that the mass of four compact stars SAX J1808.4-3658, KS 1731-260, SAX J1750.8-2900 and IGR J17191-2821 can be determined from the difference in the observed kiloHertz quasi periodic oscillations (kHz QPO-s) of these stars. The stellar radius is very close to the marginally stable orbit R_ms as predicted by Einstein’s general relativity. It may be noted that the first of these stars was suggested to be a strange star more than a decade back by Li et al. (1999a) from the unique millisecond X-ray pulsations with an accurate determination of its rotation period. It showed kHz QPO-s eight years back and so far it is the only set that has been observed. This is the first time we give an estimate of the mass of the star and of three other compact stars in low-mass X-ray binaries using their observed kHz QPO-s.     

Possible Effect of the Earth’s Inertial Induction on the Orbital Decay of LAGEOS

The theory of velocity dependent inertial induction, based upon extended Mach’s principle, has been able to generate many interesting results related to celestial mechanics and cosmological problems. Because of the extremely minute magnitude of the effect its presence can be detected through the motion of accurately observed bodies like Earth satellites. LAGEOS I and II are medium altitude satellites with nearly circular orbits. The motions of these satellites are accurately recorded and the past data of a few decades help to test many theories including the general theory of relativity. Therefore, it is hoped that the effect of the Earth’s inertial induction can have any detectable effect on the motion of these satellites. It is established that the semi-major axis of LAGEOS I is decreasing at the rate of 1.3 mm/d. As the atmospheric drag is negligible at that altitude, a proper explanation of the secular change has been wanting, and, therefore, this paper examines the effect of the Earth’s inertial induction effect on LAGEOS I. Past researches have established that Yarkovsky thermal drag, charged and neutral particle drag might be the possible mechanisms for this orbital decay. Inertial induction is found to generate a perturbing force that results in 0.33 mm/d decay of the semi major axis. Some other changes are also predicted and the phenomenon also helps to explain the observed changes in the orbits of a few other satellites. The results indicate the feasibility of the theory of inertial induction i.e. the dynamic gravitation phenomenon of the Earth on its satellites as a possible partial cause for orbital decay.     

Vegetation covers as indicator of seismo-tectonic environment: an integrated geophysical study in north Baromura hill, India

Spatial distributions of vegetation cover are closely related to topographical characters like slope, steepness, soil types, elevations, etc. In seismo-tectonic regions fault lines or tectonic lineaments are the most prominent surface signatures that can be reflected by vegetation distribution as tectonic displacement causes the change of topographical parameters. In the present study a part of northern Baromura hill (between 23º 42′ N to 23º49 N latitudes and 91º30 E to 91º36 E longitudes), which is considered as an active seismo-tectonic region of Tripura as well as northeast India, was selected for assessing the relationship between spatial variation of plant cover and topography. Geologically, Baromura hill is a north–south extended fold belt and formed by late Tertiary to Quaternary depositions. Evidences show that tectonic events played very important role in landform evolution of this area during the geological past. In this research an extensive fieldwork was conducted in the study area to understand the geomorphic and vegetation signatures and their environmental relationships. Various spectral resolutions of Landsat ETM+ were used for digital analysis. To analyse the vegetation character of this area digital operation was done within the spectral range 0.63–1.75 μm. Band 4 and band 3 were used for NDVI operation. Band 5 or mid-wave infrared band was classified in unsupervised mode to understand the range of plant water in the study area. Overlay operation with those operated images shows the spatial distribution pattern of vegetation cover indicates the landform condition. Three clear tectonic lineaments (faults) were detected from the digital study in on the northern part Baromura hill. Structural conditions of those fault lines were verified by geo-electrical survey during fieldwork. GPS tool was used for fixing the ground control points. Resistivity characters of the study area assessed from VES profile strongly supports that vegetation cover analysis from remotely sensed data within 0.63–1.75 μm spectral ranges can be a very useful tool for detecting surface tectonic signatures of the landform.     

Landscape form and millennial erosion rates in the San Gabriel Mountains,CA

It has been long hypothesized that topography, as well as climate and rock strength, exert first order controls on erosion rates. Here we use detrital cosmogenic ¹⁰Be from 50 basins, ranging in size from 1 to 150 km², to measure millennial erosion rates across the San Gabriel Mountains in southern California, where a strong E–W gradient in relief compared to weak variation in precipitation and lithology allow us to isolate the relationship between topographic form and erosion rate. Our erosion rates range from 35 to 1100 m/Ma, and generally agree with both decadal sediment fluxes and long term exhumation rates inferred from low temperature thermochronometry. Catchment-mean hillslope angle increases with erosion rate until ～ 300 m/Ma, at which point slopes become invariant with erosion rate. Although this sort of relation has been offered as support for non-linear models of soil transport, we use 1-D analytical hillslope profiles derived from existing soil transport laws to show that a model with soil flux linear in slope, but including a slope stability threshold, is indistinguishable from a non-linear law within the scatter of our data. Catchment-mean normalized channel steepness index increases monotonically, though non-linearly, with erosion rate throughout the San Gabriel Mountains, even where catchment-mean hillslope angles have reached a threshold. This non-linearity can be mostly accounted for by a stochastic threshold incision model, though additional factors likely contribute to the observed relationship between channel steepness and erosion rate. These findings substantiate the claim that the normalized channel steepness index is an important topographic metric in active ranges.     

Active tectonics in the Assam seismic gap between the meizoseismal zone of AD 1934 and 1950 earthquakes along eastern Himalayan front,India

The Assam Seismic Gap has witnessed a long seismic quiescence since the \({ Mw}{\sim }8.4\) great Assam earthquake of AD 1950. Owing to its improper connectivity over the last decades, this segment of the Himalaya has long remained inadequately explored by geoscientists. Recent geodetic measurements in the eastern Himalaya using GPS document a discrepancy between the geologic and geodetic convergence rates. West to east increase in convergence rate added with shorter time span earthquakes like the 1697 Sadiya, 1714 (\({ Mw}{\sim }8\)) Bhutan and 1950 (\({ Mw}{\sim } 8.4\)) Tibet–Assam, makes this discrepancy more composite and crucial in terms of seismic hazard assessment. To understand the scenario of palaeoearthquake surface rupturing and deformation of youngest landforms between the meizoseismal areas of \({ Mw}{\sim }8.1\) 1934 and 1950 earthquakes, the area between the Manas and Dhanshiri Rivers along the Himalayan Frontal Thrust (HFT) was traversed. The general deformation pattern reflects north-dipping thrust faults. However, back facing scarps were also observed in conjugation to the discontinuous scarps along the frontal thrust. Preliminary mapping along with the published literature suggests that, in the eastern Himalayan front the deformation is taking place largely by the thrust sheet translation without producing a prominent fault-related folds, unlike that of the central and western Himalayas.     

Wide-angle linear forward modelling of synthetic seismograms

We address the issue of linearity and scale dependence in forward modelling of seismic data from well logs, for large ray parameters, wide angles or large offsets. We present a forward model, within the context of seismic‐to‐well matching, that is linearized in the elastic properties of the earth. This model preserves linearity at large ray parameters and can handle fine‐layering effects such as induced anisotropy. Starting from a low‐contrast small‐ray‐parameter model, we extend it to a large‐ray‐parameter model by fully linearizing the elastic‐property contrasts. Overall linearity of the forward model is extended by partitioning the compressional‐wave and shear‐wave velocity fields into two fundamental scales: a kinematic scale that governs wavefield propagation effects and a dynamic scale that governs wavefield scattering effects. This analysis reveals that the standard practice in forward modelling of strongly filtering the ratio of compressional‐wave velocity to shear‐wave velocity is well founded in the underlying physics. The partitioning of the velocity fields also leads naturally to forward modelling that accounts fully for stretch effects, to resolution of the angle‐of‐incidence versus ray‐parameter dichotomy in seismic‐amplitude analysis, and to full accounting for induced anisotropy and dispersion effects due to fine‐layering of isotropic media. With the onset of routine long‐offset acquisition and the compelling need to optimize asset management in order to maximize reserve recovery, this forward model recognizes the physics of seismic wave propagation and enables a more complete exploitation of amplitude information in pre‐critical seismic data.     

Fluoride hazard and assessment of groundwater quality in the semi-arid Upper Panda River basin,Sonbhadra district,Uttar Pradesh,India

Abstract

Around 9000 inhabitants in the Panda River basin, Sonbhadhra District, Uttar Pradesh, India, are vulnerable to a “silent” dental and skeletal fluorosis from groundwater consumption. The fluoride source and seasonal groundwater quality variation were studied by collecting 65 groundwater samples in the Upper Panda River basin. Major rock types are phyllites and granite gneissic rocks. Fluoride concentrations are in the range 0.4–5.6 mg/L in the pre-monsoon season and 0.1–6.7 mg/L in the post-monsoon season. Fluor-apatite and biotite mica in the granite gneissic rock were identified as the main provenance of fluoride in the groundwater through water–rock interactions. Due to precipitation of calcium, soils become alkaline with high contents of sodium; these conditions allow fluoride to accumulate in water. According to risk index calculations, the fluoride-affected villages were shown to fall in the fluoride risk zone (with a risk index of around 1.7). On the basis of mineral stability diagrams, groundwater from the weathered and fractured aquifers appears to be stable within the kaolinite field, suggesting weathering of silicate minerals. The groundwater is chemically potable and suitable for domestic and agricultural purposes, except for a few wells in the southern region that are contaminated with high amounts of fluoride.

Editor D. Koutsoyiannis

Citation Raju, N.J., Dey, S., Gossel, W., and Wycisk, P., 2012. Fluoride hazard and assessment of groundwater quality in the semi-arid Upper Panda River basin, Sonbhadra District, Uttar Pradesh, India. Hydrological Sciences Journal, 57 (7), 1433–1452.