Solar Microflares Observed by SphinX and RHESSI

In 2009, the Russian Complex Orbital Observations Near-Earth of Activity of the Sun (CORONAS-Photon) spacecraft was launched, carrying the Polish Solar PHotometer In X-rays (SphinX). The SphinX was most sensitive in the spectral range 1.2?–?15 keV, thus an excellent opportunity appeared for comparison with the low-energy end of Ramaty High Energy Solar Spectroscopic Imager (RHESSI) spectra. Common spectral measurements with these instruments cover the range where most of the flare energy is accumulated. We have chosen four consecutive small solar events observed on 4 July 2009 at 13:43 UT, 13:48 UT, 13:52 UT, and 13:55 UT (RHESSI flare peak times) and used them to compare the data and results from the two instruments. Moreover, we included Geostationary Operational Environmental Satellite (GOES) records in our analysis. In practice, the range of comparison performed for SphinX and RHESSI is limited roughly to 3?–?6 keV. RHESSI fluxes measured with a use of one, four, and nine detectors in the 3?–?4 keV energy band agree with SphinX measurements. However, we observed that SphinX spectral irradiances are three times higher than those of RHESSI in the 4?–?6 keV energy band. This effect contributes to the difference in obtained emission measures, but the derived temperatures of plasma components are similar. RHESSI spectra were fitted using a model with two thermal components. We have found that the RHESSI hot component is in agreement with GOES, and the RHESSI hotter component fits the SphinX flaring component well. Moreover, we calculated the so-called thermodynamic measure and the total thermal energy content in the four microflares that we studied. The results obtained show that SphinX is a very sensitive complementary observatory for RHESSI and GOES.     

Boguslawsky Crater on the Moon: Landing Site Selection for the <Emphasis Type="Italic">Luna–Glob</Emphasis> Mission Descent Module

The article reviews the results of photo geological study of the lunar surface in terms of selection of most favorable landing sites from the point of view of science merit and safety for the Luna—Glob mission descent module.     

Constructing the Optimal Model of the Geoelectric Section Using Vertical Electrical Sounding Data: Case Study of the Central Part of the Garm Research Area

Izvestiya, Atmospheric and Oceanic Physics - In geophysical studies, particularly when searching for precursors of earthquakes, there are problems of investigating the geoelectric structure of the...     

Determination of the Total Ozone Content in Cloudy Conditions based on Data from the IKFS-2 Spectrometer onboard the Meteor-M no. 2 Satellite

Izvestiya, Atmospheric and Oceanic Physics - A new technique has been developed to obtain the total ozone content (TOC) under cloudy conditions from the spectra of outgoing thermal IR radiation...     

Chemical and biological features of the saline Lake Krasnovishnevoye (Baraba,Russia) in comparison with Lake Malinovoe (Kulunda,Russia): a reconnaissance study

The Baraba and Kulunda steppes are located in southwestern Siberia in an area with an arid continental climate. This paper presents results of the first study of the hypersaline Lake Krasnovishnevoye(Baraba steppe, TDS(total dissolved solids)=297 g/L, pH 7.88). The major chemical, mineralogical and biological features of the lake were studied and compared to those of Lake Malinovoe, a typical saline neutral lake of Kulunda steppe(TDS=396 g/L, pH 7.63). The phytoplankton composition and the culturable diversity of anoxygenic phototrophic bacteria from Lake Krasnovishnevoye correspond to the ones in the Kulunda lakes. Nevertheless, the peculiarities of water composition and regime of Lake Krasnovishnevoye reduce the biodiversity to prokaryotes and unicellular algae.     

InSAR滑坡探测技术研究——以金沙江乌东德水电站段为例

采用3类InSAR产品和DEM数据开展金沙江流域乌东德水电站段的潜在滑坡探测,成功识别出多处已知和未知的滑坡点,并探测出滑坡体的形态及稳定性,提供了一种高效的大范围滑坡探测技术。同时采用小基线集InSAR技术对金坪子滑坡进行监测,不仅获得该滑坡的空间分区特征,也获取重点滑坡区的时间序列结果,并且与地面监测结果比较,精度达1.8 cm。展示了不同InSAR技术在不同尺度滑坡调查与监测中的应用特点。     

The mycobiota of discoloured needles of the Swiss stone pine (<Emphasis Type="Italic">Pinus cembra</Emphasis> L.) in the Tatra Mountains (Poland)

The Swiss stone Pine (Pinus cembra L.) is an alpine species, fairly commonly occurring in the Alps and the Carpathians, close to the timberline. Natural sites of the Swiss stone pine in Poland are found exclusively in the Tatra Mountains, within the area of the Tatra National Park (TNP). In 2017, the health status of the needles of P. cembra was determined and their mycological analysis was carried out. As a result, 11 species of fungi were isolated from the needles showing disease symptoms, manifested by various shades of discoloration. The most frequently observed species was Fusarium oxysporum. It probably does not bring on disease symptoms, but may affect the development of other frequently isolated species (such as Sydowia polyspora, Lophodermium sp. and Lophodermium conigenum) that are pathogenic to Pinus spp.     

Estimates of abundance of the short-baseline (1-3 meters) slopes for different Venusian terrains using terrestrial analogues

The interplanetary mission, Venera-D, which is currently being planned, includes a lander. For a successful landing, it is necessary to estimate the frequency distributions of slopes of the Venusian surface at baselines that are comparable with the horizontal dimensions of lander (1–3 m). The available data on the topographic variations on Venus preclude estimates of the frequency of the short-wavelength slopes. In our study, we applied high-resolution digital terrain models (DTM) for specific areas in Iceland to estimate the slopes on Venus. The Iceland DTMs have 0.5 m spatial and 0.1 m vertical resolution. From the set of these DTMs, we have selected those that morphologically resemble typical landscapes on Venus such as tessera, shield, regional, lobate, and smooth plains. The mode of the frequency distribution of slopes on the model tessera terrain is within a 30°–40° range and a fraction of the surface has slopes <7°, which is considered as the upper safety limit. This is the primary interest. The frequency distribution of slopes on the model tessera is not changed significantly as the baseline is changed from 1 m to 3 m. The terrestrial surfaces that model shield and regional plains on Venus have a prominent slope distribution mode between 8°–20° and the fraction of the surfaces with slopes <7° is less than 30% on both 1 m and 3 m baselines. A narrow, left-shifted histogram characterizes the model smooth plains surfaces. The fraction of surfaces with slopes <7° is about 65–75% for the shorter baseline (1 m). At the longer baseline, the fraction of the shallow-sloped surfaces is increased and fraction of the steep slopes is decreased significantly. The fraction of surfaces with slopes <7° for the 3-m baseline is about 75–88% for the terrains that model both lobate and smooth plains.     

The nature of terrains of different types on the surface of Venus and selection of potential landing sites for a descent probe of the <Emphasis Type="Italic">Venera-D</Emphasis> Mission

We discuss a change in the resurfacing regimes of Venus and probable ways of forming the terrain types that make up the surface of the planet. The interpretation of the nature of the terrain types and their morphologic features allows us to characterize their scientific priority and the risk of landing on their surface to be estimated. From the scientific point of view, two terrain types are of special interest and represent easily achievable targets: the lower unit of regional plains and the smooth plains associated with impact craters. Regional plains are probably a melting from the upper fertile mantle. The material of smooth plains of impact origin is a well-mixed and representative sample of the Venusian crust. The lower unit of regional plains is the most widespread one on the surface of Venus, and it occurs within the boundaries of all of the precalculated approach trajectories of the lander. Smooth plains of impact origin are crossed by the approach trajectories precalculated for 2018 and 2026.     

New orbits of wide visual double stars

Based on photographic and CCD observations with the Pulkovo 26-inch refractor, radial velocity measurements with the 1.5-m RTT-150 telescope (TUBITAK National Observatory, Turkey), and highly accurate observations published in the WDS catalog, we have obtained the orbits of ten wide visual double stars by the apparent motion parameter method. The orientation of the orbits in the Galactic coordinate system has been determined. For the outer pair of the multiple star HIP 12780 we have calculated a family of orbits with a minimum period P = 4634 yr. Two equivalent solutions with the same period have been obtained for the stars HIP 50 (P = 949 yr) and HIP 66195 (P = 3237 yr). We have unambiguously determined the orbits of six stars: HIP 12777 (P = 3327 yr), HIP 15058 (P = 420 yr), HIP 33287 (P = 1090 yr), HIP 48429 (P = 1066 yr), HIP 69751 (P = 957 yr), and HIP 73846 (P = 1348 yr). The orbit of HIP 55068 is orientated perpendicularly to the plane of the sky, P >1000 yr. The star HIP 48429 is suspected to have an invisible companion.