Temperatures and winds over tropical middle atmosphere during two contrasting summer monsoons, 1975 and 1979

Using the monthly geopotential heights and winds for 700 and 200 hPa for India during July and August, and the weekly M-100 Soviet rocketsonde temperature and wind data for Thumba (8.5oN, 76.9oE) during the last week of June and the first week of September for the two contrasting summer monsoon years 1975 (a very strong monsoon year) and 1979 (a very weak monsoon year), a study has been made to examine the mean circulation features of the troposphere over India, and the structures of the temperatures and the winds of the middle atmosphere over Thumba. The study suggested that the axis of the monsoon trough (AMT) at 700 hPa shifted southward in 1975 and northward towards the foothills of the Himalayas in 1979, from its normal position. Superimposed on the low-pressure area (AMT) at 700 hPa, a well-defined divergence was noticed at 200 hPa over the northern India in 1975.The mean temperatures, at 25,50 and 60 km (middle atmosphere) over Thumba were cooler in 1975 than in 1979. While a cooling trend in 1975 and warming trend in 1979 were observed at 25 and 50 km, a reversed picture was noticed at 60 km. There was a weak easterly/ westerly (weak westerly phase) zonal wind in 1975 and a strong easterly zonal wind in 1979. A phase reversal of the zonal wind was observed at 50 km. A tentative physical mechanism was offered, in terms of upward propagation of the two equatorially trapped planetary waves i.e. the Kelvin and the mixed Rossby-gravity waves, to explain the occurrence of the two spells of strong warmings in the mesosphere in 1975.     

Note on the propagation of waves in infinite spherically-aeolotropic medium produced by a blast in a spherical cavity

Summary By using the Laplace transform method, solution has been obtained for the elastodynamic problem due to blast pulse on the inner surface of a spherical cavity in an infinite spherically aeolotropic elastic solid. Both types of blast producing radial and rotational waves have been considered.     

Compositional variations in the Mesoarchean chromites of the Nuggihalli schist belt, Western Dharwar Craton (India): potential parental melts and implications for tectonic setting

The chromite deposits in the Archean Nuggihalli schist belt are part of a layered ultramafic–mafic sequence within the Western Dharwar Craton of the Indian shield. The 3.1-Ga ultramafic–mafic units occur as sill-like intrusions within the volcano-sedimentary sequences of the Nuggihalli greenstone belt that are surrounded by the tonalite–trondhjemite–granodiorite (TTG) suite of rocks. The entire succession is exposed in the Tagdur mining district. The succession has been divided into the lower and the upper ultramafic units, separated by a middle gabbro unit. The ultramafic units comprise of deformed massive chromitite bodies that are hosted within chromite-bearing serpentinites. The chromitite bodies occur in the form of pods and elongated lenses (~60–500 m by ~15 m). Detailed electron microprobe studies reveal intense compositional variability of the chromite grains in silicate-rich chromitite (~50% modal chromite) and serpentinite (~2% modal chromite) throughout the entire ultramafic sequence. However, the primary composition of chromite is preserved in the massive chromitites (~60–75% modal chromite) from the Byrapur and the Bhaktarhalli mining district of the Nuggihalli schist belt. These are characterized by high Cr-ratios (Cr/(Cr + Al) = 0.78–0.86) and moderate Mg-ratios (Mg/(Mg + Fe²⁺) = 0.38–0.58). The compositional variability occurs due to sub-solidus re-equilibration in the accessory chromite in the serpentinite (Mg-ratio = 0.01–0.38; Cr-ratio = 0.02–0.99) and in silicate-rich chromitite (Mg-ratio = 0.06–0.48; Cr-ratio = 0.60–0.99). In the massive chromitites, the sub-solidus re-equilibration for chromite is less or absent. However, the re-equilibration is prominent in the co-existing interstitial and included olivine (Fo_96–98) and pyroxene grains (Mg-numbers = 97–99). Compositional variability on the scale of a single chromite grain occurs in the form of zoning, and it is common in the accessory chromite grains in serpentinite and in the altered grains in chromitite. In the zoned grains, the composition of the core is modified and the rim is ferritchromit. In general, ferritchromit occurs as irregular patches along the grain boundaries and fractures of the zoned grains. In this case, ferritchromit formation is not very extensive. This indicates a secondary low temperature hydrothermal origin of ferritchromit during serpentinization. In some occurrences, the ferritchromit rim is very well developed, and only a small relict core appears to remain in the chromite grain. However, complete alteration of the chromite grains to ferritchromit without any remnant core is also present. The regular, well-developed and continuous occurrence of ferritchromit rims around the chromite grain boundaries, the complete alteration of the chromite grains and the modification of the core composition indicate the alteration in the Nuggihalli schist belt to be intense, pervasive and affected by later low-grade metamorphism. The primary composition of chromite has been used to compute the nature of the parental melt. The parental melt calculations indicate derivation from a high-Mg komatiitic basalt that is similar to the composition of the komatiitic rocks reported from the greenstone sequences of the Western Dharwar Craton. Tectonic discrimination diagrams using the primary composition of chromites indicate a supra-subduction zone setting (SSZ) for the Archean chromitites of Nuggihalli and derivation from a boninitic magma. The composition of the komatiitic basalts resembles those of boninites that occur in subduction zones and back-arc rift settings. Formation of the massive chromitites in Nuggihalli may be due to magma mixing process involving hydrous high-Mg magmas or may be related to intrusions of chromite crystal laden magma; however, there is little scope to test these models because the host rocks are highly altered, serpentinized and deformed. The present configurations of the chromitite bodies are related to the multistage deformation processes that are common in Archean greenstone belts.     

An integral assessment of the role of critical process parameters on jigging

In jigging, amplitude and frequency of pulsation, and feed characteristics are the most important process parameters. Effects of these parameters on particle segregation during jigging are studied and explained through experimental as well as numerical means by drawing parallel to liquid/solid fluidization process. This is permissible because jigging could also be viewed as a repetitive process of fluidization and defluidization. Unlike a normal fluidization process, in jigging, particle segregation takes place under rapid rate of change of water velocity. The rate of change of water velocity is decided by the maximum water velocity of the jig cycle, which in turn is controlled primarily by the amplitude. Experimental evidence of the role of maximum water velocity on jigging is given. Next, the feed to the jig that varies in both size and density is conceived as a mixture of many density variant binary systems. This way, the effect of feed characteristic is conveniently analyzed through several indicators of the binary feed namely size ratio, volume fraction, and particle size. Finally, the effect of frequency is studied by considering the particles in the jig bed analogous to tuned mass dampers. This concept is used to explain the preferential segregation of particles at certain jig frequency.     

Higher Himalaya in the Bhagirathi section (NW Himalaya, India): its structures, backthrusts and extrusion mechanism by both channel flow and critical taper mechanisms

The Higher Himalayan Crystalline (HHC) in the Bhagirathi river section (India) on fieldwork reveals two extensional ductile top-to-N/NE shear sub-zones—the ‘South Tibetan Detachment System’ and the ‘Basal Detachment’—besides a preceding top-to-S/SW ductile shear. A top-to-N/NE brittle shear was identified as backthrusts from the HHC (except its northern portion) that occur repeatedly adjacent to numerous top-to-S/SW brittle shears as fore-thrusts. The northern portion of the HHC—the Gangotri Granite—exhibits infrequent total six extensional and compressional brittle shear senses. The backthrusts could be due to a low friction between the lower boundary of the HHC (i.e. the Main Central Thrust-Zone) and the partially molten hot rock materials of the HHC. Subduction of the Eurasian plate towards S/SW below the Indian plate more extensively in the Garhwal sector could be the second possible reason. Presence of two ductile extensional shear sub-zones may indicate channel flow (or several exhumation mechanisms) of the HHC in a shifting mode (similar to Mukherjee et al. in Int J Earth Sci 101:253–272, 2012). The top-to-S/SW extensional brittle shear exclusively within the upper (northern portion) of the HHC and a top-to-S/SW brittle shear within the remainder of it is a possible indicator of critical taper deformation mechanism. Thus, this work provides the field evidences of possibly both channel flow and critical taper conditions from a Higher Himalayan section, besides that by Larson et al. (Geol Soc Am Bull 122:1116–1134, 2010).     

Insignificant impact of freezing and compaction on iron solubility in natural snow

To explore the freezing effect on iron (Fe) solubility in natural environments, especially in Polar regions, event based freshly fallen snow samples were collected at Newark, New Jersey on the US East Coast for two consecutive winter seasons (2014–2015 and 2015–2016). These samples were analyzed for the concentrations of soluble iron (Fe_sol) using UV-Vis Spectroscopy and filterable iron (Fe_fil) and total iron (Fe_tot) using Atomic Absorption Spectroscopy. The average fractional solubility of the Fe_sol (the portion that passes through a 0.22 μm pore-size filter) with respect to the total Fe in the samples was 23.3?±?12.2%, with the majority of the soluble Fe being present as Fe(III). Approximately 48.5% of the total Fe existed as Fe_fil (the portion that passes through 0.45 μm pore size filter media). No significant correlation was found between the soluble ionic species and soluble Fe. Six snow events were kept frozen for 10 days, and analyzed in periodic intervals to study the post-freezing modification in Fe solubility. Events 1 and 2 showed increasing trend in the soluble Fe concentrations; however, the events 5, 6, 7, and 8 showed no noticeable increments. The pattern shown in Events 1 and 2 is associated with high fraction of Fe_fil and one unit pH drop, suggesting that the freeze-induced modification in Fe solubility could be linked with the amount of Fe_fil and the acidity change in the samples. To further investigate the freeze-induced compaction of particles, samples from three events 6, 7, and 10 were analyzed by SEM-STEM-EDS microscopy, and the results showed that due to freezing, in general, the particles in the ice-melt counterparts tend to compact and cluster and form larger aggregates compared to the particles in snow-melt. These results show, despite the freeze-induced compaction in snow was observed from STEM images, the snow freezing might not have significant effect in increasing Fe solubility from materials in the snow. These results further suggest that freezing process with fresh snow in high-latitude regions may not impose significant modification on Fe solubility in snow.     

Locating center of gravity in geological contexts

International Journal of Earth Sciences - This short article at first deduces center of gravity (C.G.) for horizontal single-layered and multi-layered rock bodies. Spatial variation of density is...     

Hydrogeochemical processes controlling fluoride enrichment within alluvial and hard rock aquifers in a part of a semi-arid region of Northern India

Rock–water interaction along with mineral dissolution/ precipitation plays a profound role in the control of fluoride ion concentration within the alluvial groundwater in a part of semi-arid northern India. In the premonsoon season, the alluvial region experiences evaporative processes leading to increase in Na⁺ ions which through reverse ion exchange processes are adsorbed onto suitable sites within the aquifer matrix in exchange for Ca²⁺ ion in solution. Increase in Ca²⁺ ions in solution inhibits fluorite mineral dissolution, thereby controlling premonsoon fluoride ion concentration within alluvial groundwaters (1.40?±?0.5 mg/l). In the postmonsoon season, however, higher average fluoride ion concentration within the alluvial aquifer samples (2.33?±?0.80 mg/l) is observed mainly due to increase in silicate weathering of fluoride-bearing rocks and direct ion exchange processes enabling Ca²⁺ ion uptake from solution accompanied with the release of fluoride ions. Combined effect of these processes results in average fluoride ion concentration falling above the WHO drinking water permissible limit (1.5 mg/l). Alternatively, the hard rock aquifer samples within the study area have an average fluoride ion concentration falling below the permissible limit in both the seasons.