Late Holocene linkages between decade–century scale climate variability and productivity at Lake Tanganyika, Africa

Microlaminated sediment cores from the Kalya slope region of Lake Tanganyika provide a near-annually resolved paleoclimate record between ∼∼2,840 and 1,420 cal. yr B.P. demonstrating strong linkages between climate variability and lacustrine productivity. Laminae couplets comprise dark, terrigenous-dominated half couplets, interpreted as low density underflows deposited from riverine sources during the rainy season, alternating with light, planktonic diatomaceous ooze, with little terrigenous component, interpreted as windy/dry season deposits. Laminated portions of the studied cores consist of conspicuous dark and light colored bundles of laminae couplets. Light and dark bundles alternate at decadal time scales. Within dark bundles, both light and dark half couplets are significantly thinner than within light bundles, implying slower sediment accumulation rates during both seasons over those intervals.Time series analyses of laminae thickness patterns demonstrate significant periodicities at interannual–centennial time scales. Longer time scale periodicities (multidecadal to centennial scale) of light and dark half couplet thicknesses are coherent and in some cases are similar to solar cycle periods on these time scales. Although laminae thickness cycles do not strongly covary with the actual Δ¹⁴C record for this same time period, two large Δ¹⁴C anomalies are associated with substantial decreases in both light and dark laminae thickness. In contrast to the multidecadal– centennial time scale, significant annual to decadal periodicities, which are broadly consistent with ENSO/PDO forcing and their impact on East African climate, are not coherent between light and dark half couplets. The coherency of light–dark couplets at decadal–centennial time scales, but not at shorter time scales, is consistent with a model of a long-term relationship between precipitation (recorded in wet season dark laminae thickness) and productivity (light laminae thickness), which is not manifest at shorter time scales. We hypothesize that this coupling results from long-term recharging of internal nutrient loading during wet periods (higher erosion of soil P) and reduced loading during drought intervals. The relationship is not expressed on short time scales during which the dominant control on productivity is wind-driven, dry season upwelling, which is uncorrelated with wet-season precipitation. Our record greatly extends the temporal record of this quasi-periodic behavior throughout the late Holocene and provides the first evidence linking decade- to century-scale episodes of enhanced productivity to enhanced precipitation levels and nutrient recharge in a productive tropical lake.     

Mixing and differentiation in the Oruanui rhyolitic magma, Taupo, New Zealand: evidence from volatiles and trace elements in melt inclusions

Large pyroclastic rhyolites are snapshots of evolving magma bodies, and preserved in their eruptive pyroclasts is a record of evolution up to the time of eruption. Here we focus on the conditions and processes in the Oruanui magma that erupted at 26.5 ka from Taupo Volcano, New Zealand. The 530 km³ (void-free) of material erupted in the Oruanui event is comparable in size to the Bishop Tuff in California, but differs in that rhyolitic pumice and glass compositions, although variable, did not change systematically with eruption order. We measured the concentrations of H₂O, CO₂ and major and trace elements in zoned phenocrysts and melt inclusions from individual pumice clasts covering the range from early to late erupted units. We also used cathodoluminescence imaging to infer growth histories of quartz phenocrysts. For quartz-hosted inclusions, we studied both fully enclosed melt inclusions and reentrants (connecting to host melt through a small opening). The textures and compositions of inclusions and phenocrysts reflect complex pre-eruptive processes of incomplete assimilation/partial melting, crystallization differentiation, magma mixing and gas saturation. ‘Restitic’ quartz occurs in seven of eight pumice clasts studied. Variations in dissolved H₂O and CO₂ in quartz-hosted melt inclusions reflect gas saturation in the Oruanui magma and crystallization depths of ∼3.5–7 km. Based on variations of dissolved H₂O and CO₂ in reentrants, the amount of exsolved gas at the beginning of eruption increased with depth, corresponding to decreasing density with depth. Pre-eruptive mixing of magma with varying gas content implies variations in magma bulk density that would have driven convective mixing. Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.     

Late Cretaceous reactivation of major crustal shear zones in northern Namibia: constraints from apatite fission track analysis

Namibia's passive continental margin records a long history of tectonic activity since the Proterozoic. The orogenic belt produced during the collision of the Congo and Kalahari Cratons in the Early Proterozoic led to a zone of crustal weakness, which became the preferred location for tectonism during the Phanerozoic. The Pan-African Damara mobile belt forms this intraplate boundary in Namibia and its tectonostratigraphic zones are defined by ductile shear zones, where the most prominent is described as the Omaruru Lineament–Waterberg Thrust (OML–WT). The prominance of the continental margin escarpment is diminished in the area of the Central and Northern Zone of the Damara belt where the shear zones are located. This area has been targeted with a set of 66 outcrop samples over a 550-km-long, 60-km-broad coast-parallel transect from the top of the escarpment in the south across the Damara sector to the Kamanjab Inlier in the north. Apatite fission track age and length data from all samples reveal a regionally consistent cooling event. Thermal histories derived by forward modelling bracket this phase of accelerated cooling in the Late Cretaceous. Maximum palaeotemperatures immediately prior to the onset of cooling range from ca. 120 to ca. 60 °C with the maximum occurring directly south of the Omaruru Lineament. Because different palaeotemperatures indicate different burial depth at a given time, the amount of denudation can be estimated and used to constrain vertical displacements of the continental crust. We interpret this cooling pattern as the geomorphic response to reactivation of basement structures caused by a change in spreading geometry in the South Atlantic and South West Indian Oceans.     

Geochemistry and sequence stratigraphy of regional Upper Cretaceous limestone units, offshore eastern Canada

Hydrocarbons occur in two regional, Upper Cretaceous limestone units—the Turonian-Coniacian Petrel Member, and the Santonian-Maastrichtian Wyandot Formation. The units form important seismic markers beneath the Scotian Shelf and the Grand Banks of Eastern Canada. They mainly consist of bioturbated chalk and minor amounts of calcareous mudstone. A search for source rock using the Δ log R technique showed intervals with source potential, but testing of core and cuttings by Rock-Eval analysis showed no source potential. Three issues are the main cause for the inconsistency: (1) unconsolidated shales that likely included organic material were lost during sample washing; (2) severe contamination by mud additives; and (3) presence of gas. The organic matter found on the shelf has been strongly oxidised, but the distal facies of these limestone units and condensed shale units above and below may yet have potential to form source rock, beyond the studied areas.     

Elemental and isotopic fractionation of Type B calcium-, aluminum-rich inclusions: experiments, theoretical considerations, and constraints on their thermal evolution

Experiments exposing Type B calcium-, aluminum-rich inclusion (CAI)-like melts at high temperatures to high vacuum or reducing hydrogen-rich gas mixtures were used to determine the rates and consequences of elemental and isotopic fractionation by evaporation. Silicon and magnesium were found to evaporate much faster than calcium and aluminum, and the resulting residual liquid trajectories in composition space are reproduced via a thermodynamic model for the saturation vapor pressure of the evaporating species. Isotopic fractionations associated with evaporation were measured for magnesium. The resulting relationship between fraction of magnesium lost and enrichment of the residue in the heavy isotopes of magnesium follows a Rayleigh fractionation curve with a fractionation factor that is close to, but not exactly, the theoretically expected value. The rate of evaporation is found to be a strong function of temperature, oxygen fugacity, and melt composition, which can be understood and modeled in terms of the dependence of the saturation vapor pressures on these variables. The relationship between evaporation rate, which we measure, and calculated saturation vapor involves empirical evaporation coefficients that we find to be significantly less than one (∼0.1). Analytical and numerical models are used to characterize how diffusion in both the melt and in the surrounding gas affects evaporation rates and the degree of chemical and isotopic fractionation. The experimental data and theoretical considerations are combined to give a parameterization of the rates and consequences of evaporation of Type B CAI-like liquids, which is then used to translate the measured isotopic fractionation of Type B CAIs into constraints on their thermal history. Cooling rates of the order of 10°C per hour are indicated.     

Comparative Re-Os systematics of chondrites: Implications regarding early solar system processes

A suite of 47 carbonaceous, enstatite, and ordinary chondrites are examined for Re-Os isotopic systematics. There are significant differences in the ¹⁸⁷Re/¹⁸⁸Os and ¹⁸⁷Os/¹⁸⁸Os ratios of carbonaceous chondrites compared with ordinary and enstatite chondrites. The average ¹⁸⁷Re/¹⁸⁸Os for carbonaceous chondrites is 0.392 ± 0.015 (excluding the CK chondrite, Karoonda), compared with 0.422 ± 0.025 and 0.421 ± 0.013 for ordinary and enstatite chondrites (1σ standard deviations). These ratios, recast into elemental Re/Os ratios, are as follows: 0.0814 ± 0.0031, 0.0876 ± 0.0052 and 0.0874 ± 0.0027, respectively. Correspondingly, the ¹⁸⁷Os/¹⁸⁸Os ratios of carbonaceous chondrites average 0.1262 ± 0.0006 (excluding Karoonda), and ordinary and enstatite chondrites average 0.1283 ± 0.0017 and 0.1281 ± 0.0004, respectively (1σ standard deviations). The new results indicate that the Re/Os ratios of meteorites within each group are, in general, quite uniform. The minimal overlap between the isotopic compositions of ordinary and enstatite chondrites vs. carbonaceous chondrites indicates long-term differences in Re/Os for these materials, most likely reflecting chemical fractionation early in solar system history.A majority of the chondrites do not plot within analytical uncertainties of a 4.56-Ga reference isochron. Most of the deviations from the isochron are consistent with minor, relatively recent redistribution of Re and/or Os on a scale of millimeters to centimeters. Some instances of the redistribution may be attributed to terrestrial weathering; others are most likely the result of aqueous alteration or shock events on the parent body within the past 2 Ga.The ¹⁸⁷Os/¹⁸⁸Os ratio of Earth’s primitive upper mantle has been estimated to be 0.1296 ± 8. If this composition was set via addition of a late veneer of planetesimals after core formation, the composition suggests the veneer was dominated by materials that had Re/Os ratios most similar to ordinary and enstatite chondrites.     

Multiple stressors in an estuarine system: Effects of nutrients, trace elements, and trophic complexity on benthic photosynthesis and respiration

The effects of nutrients, trace elements, and trophic complexity on benthic photosynthesis and respriation were studied in the Paxtuxent River estuary near St. Leonard, Maryland. Experiments were conducted over three years (1995–1997) in mesocosms containing riverine sediment and water. The experimental design was 2×2×3 factorial with two levels of nutrients (ambient and + nutrients), two of trace elements (ambient and + trace elements) and three of trophic complexity (plankton, plankton + fish, and plankton + fish + benthos). Trace elements included arsenic (As), copper (Cu), and cadmium (Cd). The experiment was conducted three times in 1995 and 1997 and four times in 1996. In 1995 and 1996, sediments were muddy, while in the final year sediments were sandy. In mesocoms with sandy sediments, nutrient additions increased benthic photosynthesis overall, while trace element additions increased benthic photosynthesis in two of three experimental runs. Benthic photosynthesis in these mesocosms appeared to be related to nitrogen loading. Benthic respiration increased in nutrient and trace element amended mesocosms with sandy sediments, apparently in response to higher benthic photosynthesis. Increasing trophic complexity, particularly the presence of benthic organisms, also increased benthic respiration in mesocosms with sandy sediments. There were no effects of nutrient or trace element additions on benthic photosynthesis and respiration when the sediments were muddy. The lack of consistent responses to nutrient additions was surprising given that benthic respiration rates (and presumably nutrient regeneration) were similar in all three years, regardless of sediment type. Muddy, sediments did not mask, the effects of nutrient addition by supplying more nutrients to benthic microalgae than sandy sediments. In 1996, the presence of filter feeding bivalves increased the relative heterotrophy of sediments, measured as production: respiration. Consistent with increased heterotrophy, effluxes of ammonium and soluble reactive phosphorus from sediments were greater in mesocosms containing benthic organisms. Anthropogenically-induced changes in estuaries, such as loading of nutrients and trace elements or reduced trophic complexity, can have important effects on benthic processes and potentially pelagic processes through feedback mechanisms.     

Experimental validation of the wavefield transform of electromagnetic fields

The wavefield transform is a mathematical technique for transforming low-frequency electromagnetic (EM) signals to a non-diffusive wave domain. The ray approximation is valid in the transform space and this makes traveltime tomography for 3D mapping of the electrical conductivity distribution in the subsurface possible. The transform, however, imposes stringent frequency bandwidth and signal-to-noise ratio requirements on the data. Here we discuss a laboratory scale experiment designed to collect transform quality EM data, and to demonstrate the practical feasibility of transforming these data to the wavefield domain.
We have used the scalable nature of EM fields to design a time-domain experiment using graphite blocks to simulate realistic field conditions while leaving the time scale undisturbed. The spatial dimensions have been scaled down by a factor of a thousand by scaling conductivity up by a factor of a million. The graphite blocks have two holes drilled into them to carry out cross-well and borehole-to-surface experiments. Steel sheets have been inserted between the blocks to simulate a conductive layer.
Our experiments show that accurate EM data can be recorded on a laboratory scale model even when the scaling of some features, such as drill-hole diameters, is not maintained. More importantly, the time-domain EM data recorded in cross-well and surface-to-borehole modes can be usefully and accurately transformed to the wavefield domain. The observed wavefield propagation delay is proportional to the direct distance between the transmitter and receiver in a homogeneous medium. In a layered medium, data accuracy is reduced and, hence, our results are not so conclusive. On the basis of the experimental results we conclude that the wavefield transform could constitute a valid approach to the interpretation of accurate, undistorted time-domain data if further improvement in the transform can be realized.