Sea surface temperature trends in Kuwait Bay,Arabian Gulf

The magnitude 8.1 earthquake and subsequent tsunami killed 52 people when it hit the Solomon Islands on 2 April 2007. That number would have likely been considerably higher were it not for the appropriate reaction of the indigenous coastal populations and a helpful physical geography. Buffering coral reefs reflected some wave energy back to sea, reducing the power of the wave. Hills a short distance behind the coastal villages provided accessible havens. Despite this beneficial physiography, immigrant populations died at disproportionately high rates in comparably damaged areas because they did not recognize the signs of the impeding tsunami. The indigenous population of Tapurai, which lacks a steep barrier reef to reflect the incoming energy, experienced a much more powerful wave, and the population suffered heavy losses. Indigenous knowledge as an integral tool in basin wide tsunami warning systems has the potential to mitigate disasters in the near field. Community-based disaster management plans must be cognizant of educating diverse populations that have different understandings of their environment.     

Thermal generation of ferromagnetic minerals from iron-enriched smectites

In recent years remagnetization of orogenic belts has been explained by fluid migration through rocks undergoing deformation. A laboratory study of remagnetization is presented in which varying amounts of iron (0-13.5 weight per cent Fe₂O₃) are adsorbed onto smectite surfaces. All smectite samples contain structural Fe (III) which is located in octahedral sites and is thermally stable up to 700 C. An increase in the amount of iron adsorbed onto the clay surface leads to the formation of ferric nanophases in which parts are magnetic. Mineralogical changes that occur during thermal treatment between room temperature and 700 C were monitored using electron spin resonance (ESR), bulk susceptibility, acquisition of isothermal remanent magnetization (IRM) and Curie temperature analysis. After heating the samples to 250 C, a new ferrimagnetic phase is created as indicated by ESR and IRM acquisition. ESR spectra, IRM acquisition and Curie analyses suggest that magnetite is the predominant phase that is being created. These grains continue to be created and grow with heating up to 500 C. Above this temperature a decrease in the intensity of the IRM at 1T suggests that the phase is being transformed into haematite. The thermal experiments on iron-loaded smectites show that surface-induced processes can lead to the formation of new magnetic minerals under conditions characteristic of low-grade metamorphism.     

Sedimentology,depositional environments and significance of an Ediacaran salt‐withdrawal minibasin,Billy Springs Formation,Flinders Ranges,South Australia

The late Ediacaran Billy Springs Formation is a little‐studied, mudstone‐dominated unit deposited in the Adelaide Rift Complex of South Australia. Sediments are exposed in an approximately 11 km × 15 km synclinal structure interpreted as a salt‐withdrawal minibasin. The stratigraphic succession is characterized by convolute‐laminated slump deposits, rhythmically laminated silty mudstones, rare diamictites and fining‐upward turbidite lithofacies. Lithofacies are the product of deposition in a deepwater slope or shelf setting, representing one of the few such examples preserved within the larger basin. Although exact correlations with other formations are unclear, the Billy Springs Formation probably represents the distal portion of a highstand systems tract, and is overlain by coarser sediments of the upper Pound Subgroup. Diamictite intervals are interpreted to be the product of mass flow processes originating from nearby emergent diapirs, in contrast to previous studies that suggest a glacial origin for extrabasinal clasts. Within the spectrum of outcropping minibasins around the world, the sediments described here are unique in their dominantly fine‐grained nature and overall lithological homogeneity. Exposures such as these provide an opportunity to better understand the sedimentological processes that operate in these environments, and provide an analogue for similar settings in the subsurface that act as hydrocarbon reservoir‐trap systems.     

Integrated cave drip monitoring for epikarst recharge estimation in a dry Mediterranean area,Sif Cave,Israel

Understanding recharge mechanisms and controls in karst regions is extremely important for managing water resources because of the dynamic nature of the system. The objective of this study was to evaluate water percolation through epikarst by monitoring water flow into a cave and conducting artificial irrigation and tracer experiments, at Sif Cave in Wadi Sussi, Israel from 2005 through 2007. The research is based on continuous high‐resolution direct measurements of both rainfall and water percolation in the cave chamber collected by three large PVC sheets which integrate drips from three different areas (17, 46, and 52 m²). Barrels equipped with pressure transducers record drip rate and volume for each of the three areas. The combined measured rainfall and cave data enables estimation of recharge into the epikarst and to better understand the relationship of rainfall‐recharge. Three distinct types of flow regimes were identified: (1) ‘Quick flow’ through preferential flow paths (large fractures and conduits); (2) ‘Intermediate flow’ through a secondary crack system; and (3) ‘Slow flow’ through the matrix. A threshold of ～100 mm of rain at the beginning of the rainy season is required to increase soil water content allowing later rainfall events to percolate deeper through the soil and to initiate dripping in the cave. During winter, as the soil water content rises, the lag time between a rain event and cave drip response decreases. Annual recharge (140–160 mm in different areas in the cave) measured represents 30–35% of annual rainfall (460 mm). Copyright © 2011 John Wiley & Sons, Ltd.     

Use of a high-resolution profiling sonar and a towed video camera to map a Zostera marina bed,Solent, UK

Seagrasses are flowering plants that develop into extensive underwater meadows and play a key role in the coastal ecosystem. In the last few years, several techniques have been developed to map and monitor seagrass beds in order to protect them. Here, we present the results of a survey using a profiling sonar, the Sediment Imager Sonar (SIS) and a towed video sledge to study a Zostera marina bed in the Solent, southern UK. The survey aimed to test the instruments for seagrass detection and to describe the area for the first time.     

Unit bar architecture in a highly-variable fluvial discharge regime: Examples from the Burdekin River,Australia

Unit bars are relatively large bedforms that develop in rivers over a wide range of climatic regimes. Unit bars formed within the highly-variable discharge Burdekin River in Queensland, Australia, were examined over three field campaigns between 2015 and 2017. These bars had complex internal structures, dominated by co-sets of cross-stratified and planar-stratified sets. The cross-stratified sets tended to down-climb. The development of complex internal structures was primarily a result of three processes: (i) superimposed bedforms reworking the unit bar avalanche face; (ii) variable discharge triggering reactivation surfaces; and (iii) changes in bar growth direction induced by stage change. Internal structures varied along the length and across the width of unit bars. For the former, down-climbing cross-stratified sets tended to pass into single planar cross-stratified deposits at the downstream end of emergent bars; such variation related to changes in fluvial conditions whilst bars were active. A hierarchy of six categories of fluvial unsteadiness is proposed, with these discussed in relation to their effects on unit bar (and dune) internal structure. Across-deposit variation was caused by changes in superimposed bedform and bar character along bar crests; such changes related to the three-dimensionality of the channel and bar geometry when bars were active. Variation in internal structure is likely to be more pronounced in unit bar deposits than in smaller bedform (for example, dune) deposits formed in the same river. This is because smaller bedforms are more easily washed out or modified by changing discharge conditions and their smaller dimensions restrict the variation in flow conditions that occur over their width. In regimes where unit bar deposits are well-preserved, their architectural variability is a potential aid to their identification. This complex architecture also allows greater resolution in interpreting the conditions before and during bar initiation and development.     

Controls on channel deposits of highly variable rivers: Comparing hydrology and event deposits in the Burdekin River,Australia

Discharge event frequency, magnitude and duration all control river channel morphology and sedimentary architecture. Uncertainty persists as to whether alluvial deposits in the rock record are a time-averaged amalgam from all discharge events, or a biased record of larger events. This paper investigates the controls on channel deposit character and subsurface stratigraphic architecture in a river with seasonal discharge and very high inter-annual variability, the Burdekin River of north-east Australia. In such rivers, most sediment movement is restricted to a few days each year and at other times little sediment moves. However, the maximum discharge magnitude does not directly correlate with the amount of morphological change and some big events do not produce large deposits. The Burdekin channel deposits consist of five main depositional elements: (i) unit bars; (ii) vegetation-generated bars; (iii) gravel sheets and lags; (iv) antidune trains; and (v) sand sheets. The proportions of each depositional element preserved in the deposits depend on the history of successive large discharge events, their duration and the rate at which they wane. Events with similar peak magnitude but different rate of decline preserve different event deposits. The high intra-annual and inter-annual discharge variability and rapid rate of stage change make it likely that small to moderate-scale bed morphology will be in disequilibrium with flow conditions most of the time. Consequently, dune and unit bar size and cross-bed set thickness are not good indicators of event or channel size. Antidunes may be more useful as indicators of flow conditions at the time they formed. Rivers with very high coefficient of variance of maximum discharge, such as the Burdekin, form distinctive channel sediment bodies. However, the component parts are such that, if they are examined in isolation, they could lead to misleading interpretation of the nature of the depositional environment if conventional interpretations are used.     

The measurement of sand transport in two inlets of Venice lagoon,Italy

Sand transport in Lido and Chioggia inlets was measured using modified Helley–Smith sand traps equipped with 60-micron nets. The traps had an efficiency of about 4% only but provided enough material for analysis. Very fine sand (0.07 < d < 0.11 mm) only was collected in the traps. Transport of sand was greatest in the bottom 10% of the water column and followed a Rouse profile. Sand extended to a height of about 4 m above the bed during peak flows corresponding to the estimated thickness of the boundary layer; and observed in synoptic ADCP profiles. The sand in the benthic boundary layer was largely inorganic (>95%); above this layer, organic content varied widely and was greatest near the surface. The movability number Ws/U_∗$W_s/U_{\ast }$ showed a linear relationship to dimensionless grain diameter (D_*): (Ws/U_∗)=(D_∗/10)$\left(W_s/U_{\ast }\right)=\left(D_{\ast }/10\right)$; D_* < 10. Sand concentration in suspension was simulated by a mean Rouse parameter of −2.01 ± 0.66 (Lido inlet) and −0.82 ± 0.27 (Chioggia inlet). The β parameter ( Hill et al., 1988) was correlated with D_* and movability number in the form: β=2.07−2.03D_∗+59(Ws/U_∗)²$\beta =2.07-2.03D_{\ast }+59{\left(W_s/U_{\ast }\right)}^2$ (r² = 0.42). Von Karman's constant was back-calculated from a Law of the Wall relationship as a test on the accuracy of U_* estimates; a mean value of 0.37 ± 0.1 (compared to the accepted value of 0.41) suggest U_* was accurate to within 10%. The constant of proportionality (γ = 3.54 × 10⁻⁴) between reference concentration (C_a) and normalized excess bed shear stress was in line with the published literature.     

FATTY ACIDS PROFILE IN A HIGH CELL DENSITY CULTURE OF ARACHIDONIC ACID-RICH PARIETOCHLORIS INCISA （TREBOUXIOPHYCEAE, CHLOROPHYTA） EXPOSED TO HIGH PFD

The changes in arachidonic acid (AA) and fatty acids profiles along the growth curve ofParietochloris incisa, a coccoid snow green alga, were studied in a 2.8 cm light-path flat photobiorcactor, exposed to strong photon flux density [PFD, 2400 μEmol/(m²·s)]. Sixteen fatty acids were identified by gas chromatography showing that AA was the dominant fatty acid (33%–41%) followed by linoleic acid (17%–21%). AA content was closely investigated with respect to total fatty acids (TFA), ash free dry weight (AFDW) of cell mass as well as total culture content. These parameters were influenced significantly in a similar manner by culture growth phase, i.e., slightly decreasing in the lag period, gradually increasing in the logarithmic phase, becoming maximal at the early stationary phase, starting to decrease at the late stationary phase, sharply dropping at the decline phase. The increase in AA per culture volume during the logarithmic phase was not only associated with the increase in AFDW but also connected with a corresponding increase in AA/TFA, TFA/AFDW as well as AA/AFDW. The sharp decrease in AA content of the culture during the decline phase was mainly due to the decrease in AA/TFA, TFA/AFDW and AA/AFDW, although AFDW declined only a small extent. Maximal AA concentration, obtained at the early stationary phase, was 900 mg/L culture volume, and the average daily net increase of AA during 9 days logarithmic growth was 1.7 g/(m²·day). Therefore, harvesting prior to the decline phase in a batch culture, or at steady state in continuous culture mode seems best for high AA production. The latter possibility was also further confirmed by continuous culture with 5 gradients of harvesting rate. Contribution No. 4138 from the Institute of Oceanology, Chinese Academy of Sciences. Project 39970575 supported by NSFC and A/2786-2 supported by International Foundation for Sciences (IFS).