Numerical Modeling of Tropical Cyclone-Induced Storm Surge in the Gulf of Oman Using a Storm Surge–Wave–Tide Coupled Model

Ocean Science Journal - A storm surge is a complex phenomenon in which current, tide, and waves interact with each other. Even if the wind is the main force of driving the surge, waves and tide are...     

Comparison of Speed-Up Over Hills Derived from Wind-Tunnel Experiments,Wind-Loading Standards,and Numerical Modelling

We evaluate the accuracy of the speed-up provided in several wind-loading standards by comparison with wind-tunnel measurements and numerical predictions, which are carried out at a nominal scale of 1:500 and full-scale, respectively. Airflow over two- and three-dimensional bell-shaped hills is numerically modelled using the Reynolds-averaged Navier–Stokes method with a pressure-driven atmospheric boundary layer and three different turbulence models. Investigated in detail are the effects of grid size on the speed-up and flow separation, as well as the resulting uncertainties in the numerical simulations. Good agreement is obtained between the numerical prediction of speed-up, as well as the wake region size and location, with that according to large-eddy simulations and the wind-tunnel results. The numerical results demonstrate the ability to predict the airflow over a hill with good accuracy with considerably less computational time than for large-eddy simulation. Numerical simulations for a three-dimensional hill show that the speed-up and the wake region decrease significantly when compared with the flow over two-dimensional hills due to the secondary flow around three-dimensional hills. Different hill slopes and shapes are simulated numerically to investigate the effect of hill profile on the speed-up. In comparison with more peaked hill crests, flat-topped hills have a lower speed-up at the crest up to heights of about half the hill height, for which none of the standards gives entirely satisfactory values of speed-up. Overall, the latest versions of the National Building Code of Canada and the Australian and New Zealand Standard give the best predictions of wind speed over isolated hills.     

Bringing globalization to the countryside: Special Economic Zones in India

Special Economic Zones (SEZs) are important vectors of neoliberal globalization in India. Despite facing widespread resistance against the proposed land acquisition for these zones, they are still being promoted across the country. We argue that the wealth redistribution to the country's elites and the fractured resistance movements enable neoliberalism and its practices to grow in the countryside. Using a private sector SEZ in Gurgaon as a case study, this article explores how special economic zoning, as a neoliberal policy, has been implicated in the spatialized production of poverty. We also show that the main actors who promote neoliberalism in India (the state and the large‐scale urban private sector) have found a seemingly unlikely ally in rural India in the form of farmers with large landholdings, rural elites who are willing to let go of their land under certain conditions. The data for the article was collected in India in 2009–10.     

Operation of two major reservoirs of Iran under IPCC scenarios during the XXI century

We assess the effects of prospective climate change until 2100 on water management of two major reservoirs of Iran, namely, Dez (3.34 × 10⁹ m³) and Alavian (6 × 10⁷ m³). We tune the Poly‐Hydro model suited for simulation of hydrological cycle in high altitude snow‐fed catchments. We assess optimal operation rules (ORs) for the reservoirs using three algorithms under dynamic and static operation and linear and non‐linear decision rules during control run (1990–2010 for Dez and 2000–2010 for Alavian). We use projected climate scenarios (plus statistical downscaling) from three general circulation models, EC‐Earth, CCSM4, and ECHAM6, and three emission scenarios, or representative concentration pathways (RCPs), RCP2.6, RCP4.5, and RCP8.5, for a grand total of nine scenarios, to mimic evolution of the hydrological cycle under future climate until 2100. We subsequently test the ORs under the future hydrological scenarios (at half century and end of century) and the need for reoptimization. Poly‐Hydro model when benchmarked against historical data well mimics the hydrological budget of both catchments, including the main processes of evapotranspiration and streamflows. Teaching–learning‐based optimization delivers the best performance in both reservoirs according to objective scores and is used for future operation. Our projections in Dez catchment depict decreased precipitation along the XXI century, with ?1% on average (of the nine scenarios) at half century and ?6% at the end of century, with changes in streamflows on average ?7% yearly and ?13% yearly, respectively. In Alavian, precipitation would decrease by ?10% on average at half century and ?13% at the end of century, with streamflows ?14% yearly and ?18% yearly, respectively. Under the projected future hydrology, reservoirs' operation would provide lower performance (i.e., larger lack of water) than now, especially for Alavian dam. Our results provide evidence of potentially decreasing water availability and less effective water management in water stressed areas like Northern Iran here during this century.     

Intentional contamination of water distribution networks: developing indicators for sensitivity and vulnerability assessments

Performing a comprehensive risk analysis is primordial to ensure a reliable and sustainable water supply. Though the general framework of risk analysis is well established, specific adaptation seems needed for systems such as water distribution networks (WDN). Understanding of vulnerabilities of WDN against deliberate contamination and consumers’ sensitivity against contaminated water use is very vital to inform decision-maker. This paper presents an innovative step-by-step methodology for developing comprehensive indicators to perform sensitivity, vulnerability and criticality analyses in case of absence of early warning system (EWS). The assessment and the aggregation of these indicators with specific fuzzy operators allow identifying the most critical points in a WDN. Intentional intrusion of contaminants at these points can potentially harm both the consumers as well as water infrastructure. The implementation of the developed methodology has been demonstrated through a case study of a French WDN unequipped with sensors.     

Assessment of models predicting anthropogenic interventions and climate variability on surface runoff of the Lower Zab River

Multi-regression, hydrologic sensitivity and hydrologic model simulations were applied to quantify the climate change and anthropogenic intervention impacts on the Lower Zab River basin (LZRB). The Pettitt, precipitation-runoff double cumulative curve (PR-DCC) and Mann–Kendall methods were used for the change points and significant trend analyses in the annual streamflow. The long-term runoff series from 1979 to 2013 was first divided into two main periods: a baseline (1979–1997) and an anthropogenic intervention period (1998–2013). The findings show that the mean annual streamflow changes were consistent using the three methods. In addition, climate variability was the main driver, which led to streamflow reduction with contributions of 66–97% during 2003–2013, whereas anthropogenic interventions caused reductions of 4–34%. Moreover, to enhance the multi-model combination concept and explore the simple average method (SAM), Hydrologiska Byrans Vattenbalansavdelning (HBV), Génie Rural a Daily 4 parameters (GR4J) and Medbasin models have been successfully applied.     

Lithology-dependent seismic anisotropic amplitude variation with offset correction in transversely isotropic media

Analysis of amplitude variation with offset is an essential step for reservoir characterization. For an accurate reservoir characterization, the amplitude obtained with an isotropic assumption of the reservoir must be corrected for the anisotropic effects. The objective is seismic anisotropic amplitude correction in an effective medium, and, to this end, values and signs of anisotropic parameter differences (Δδ and Δε) across the reflection interfaces are needed. These parameters can be identified by seismic and well log data. A new technique for anisotropic amplitude correction was developed to modify amplitude changes in seismic data in transversely isotropic media with a vertical axis of symmetry. The results show that characteristics of pre-stack seismic data, that is, amplitude variation with offset gradient, can be potentially related to the sign of anisotropic parameter differences (Δδ and Δε) between two layers of the reflection boundary. The proposed methodology is designed to attain a proper fit between modelled and observed amplitude variation with offset responses, after anisotropic correction, for all possible lithofacies at the reservoir boundary. We first estimate anisotropic parameters, that is, δ and ε, away from the wells through Backus averaging of elastic properties resulted from the first pass of isotropic pre-stack seismic inversion, on input data with no amplitude correction. Next, we estimate the anisotropic parameter differences at reflection interfaces (values and signs of Δδ and Δε). We then generate seismic angle gather data after anisotropic amplitude correction using Rüger's equation for the P-P reflection coefficient. The second pass of isotropic pre-stack seismic inversion is then performed on the amplitude-corrected data, and elastic properties are estimated. Final outcome demonstrates how introduced methodology helps to reduce the uncertainty of elastic property prediction. Pre-stack seismic inversion on amplitude-corrected seismic data results in more accurate elastic property prediction than what can be obtained from non-corrected data. Moreover, a new anisotropy attribute (ν) is presented for improvement of lithology identification.     

Socio-hydrological framework for investigating farmers’ activities affecting the shrinkage of Urmia Lake; hybrid data mining and agent-based modelling

ABSTRACT

Developing a general framework to capture the complexities associated with the non-linear and adaptive nature of farmers facing water resources scarcity is a challenging problem. This paper integrates agent-based modelling (ABM) and a data mining method to develop a hybrid socio-hydrological framework to provide future insights for policy-makers. The data associated with the farmers’ main characteristics were collected through field surveys and interviews. Afterwards, the association rule was employed to discover the main patterns representing the farmers’ agricultural decisions. The discovered patterns were then used as the behavioural rules in ABM to simulate the agricultural activities. The proposed framework has been was applied to explore the interactions between agricultural activities and the main river feeding the Urmia-Lake, Iran. The outcomes indicate that farmers’ acquisitive traits and belongings have significant impacts on their socio-hydrological interactions. The reported values of the efficiency criteria may support the satisfactory performance of the proposed framework.     

Time-frequency decomposition of seismic signals via quantum swarm evolutionary matching pursuit

Matching pursuit belongs to the category of spectral decomposition approaches that use a pre-defined discrete wavelet dictionary in order to decompose a signal adaptively. Although disengaged from windowing issues, matching point demands high computational costs as extraction of all local structure of signal requires a large size dictionary. Thus in order to find the best match wavelet, it is required to search the whole space. To reduce the computational cost of greedy matching pursuit, two artificial intelligence methods, (1) quantum inspired evolutionary algorithm and (2) particle swarm optimization, are introduced for two successive steps: (a) initial estimation and (b) optimization of wavelet parameters. We call this algorithm quantum swarm evolutionary matching pursuit. Quantum swarm evolutionary matching pursuit starts with a small colony of population at which each individual, is potentially a transformed form of a time-frequency atom. To attain maximum pursuit of the potential candidate wavelets with the residual, the colony members are adjusted in an evolutionary way. In addition, the quantum computing concepts such as quantum bit, quantum gate, and superposition of states are introduced into the method. The algorithm parameters such as social and cognitive learning factors, population size and global migration period are optimized using seismic signals. In applying matching pursuit to geophysical data, typically complex trace attributes are used for initial estimation of wavelet parameters, however, in this study it was shown that using complex trace attributes are sensitive to noisy data and would have lower rate of convergence. The algorithm performance over noisy signals, using non-orthogonal dictionaries are investigated and compared with other methods such as orthogonal matching pursuit. The results illustrate that quantum swarm evolutionary matching pursuit has the least sensitivity to noise and higher rate of convergence. Finally, the algorithm is applied to both modelled seismograms and real data for detection of low frequency anomalies to validate the findings.