A Comparative Study of Landsat‐7 and Landsat‐8 Data Using Image Processing Methods for Hydrothermal Alteration Mapping

Comparing spaceborne satellite images of Landsat‐8 Operational Land Imager (OLI) and Landsat‐7 Enhanced Thematic Mapper plus (ETM+) was undertaken to investigate the relative accuracy of mapping hydrothermal alteration minerals. The study investigated the northern part of Rabor, which contains copper mineralization occurrences, and is located in the Kerman Cenozoic magmatic assemblage (KCMA), Iran. Image processing methods of band ratio, principal component analysis (PCA), and spectral angle mapper (SAM) were used to map the distribution of hydrothermally altered rocks associated with the porphyry copper mineralization. The band ratio combination of both sensors for mapping altered areas showed similar outcomes. PCA exposed variations in the spatial distribution of hydroxyl‐bearing minerals. The representation of hydrothermal areas using OLI data was more satisfactory than when using ETM+ data. SAM analysis found similar results for mapping hydroxyl‐bearing zones. Verification of the results came through ground investigation and laboratory studies. Rock samples (n = 56) were collected to validate results using thin sections, X‐ray diffraction (XRD) and spectral analyses. Field observations and laboratory analysis revealed that phyllic and propylitic alterations dominate the alteration zones in the study area. Argillic and iron oxides/hydroxides alterations were observed to a lesser degree. The results indicate that alteration maps prepared by OLI data using PCA for visual interpretation are more suitable than those of ETM+ due to a higher radiometric resolution and lower interference between vegetation and altered areas. As the spectral bandwidth of ETM+ band 7 covers absorption feature of propylitic alteration, better mapping of propylitic alterations is achieved using ETM+ data.     

A study of aerosol properties over Lahore (Pakistan) by using AERONET data

It is well established that aerosols affect the climate in a variety of ways. In order to understand these effects, we require an insight into the properties of aerosols. In this paper we present a study of aerosol properties such as aerosol optical depth (AOD), single scattering albedo (SSA) and aerosol radiative forcing (ARF) over mega city of Lahore (Pakistan). The data from Aerosol Robotic Network (AERONET) have been used for the period December 2009 to October 2011. The seasonal average values of AOD, asymmetry parameter (ASY) and volume size distribution in coarse mode were observed to be highest in summer. On the other hand, the average values of Angstrom exponent (AE) and imaginary part of refractive index (RI) were found to be maximum in winter. The average value of real part of RI was found to be higher in spring than in all other seasons. The SSA exhibited an increasing trend with wavelength in the range 440 nm–1020 nm in spring, summer and fall indicating the dominance of coarse particles (usually dust). However, a decreasing trend was found in winter in the range 675 nm–1020 nm pointing towards the dominance of biomass and urban/industrial aerosols. As far as aerosol radiative forcing (ARF) is concerned, we have found that during the spring season ARF was lowest at the surface of Earth and highest at top of the atmosphere (TOA). This indicates that the atmosphere was warmer in spring than in all the remaining seasons.     

Estimation of the Land Surface Emissivity in the Hinterland of Taklimakan Desert

An accurate accounting of land surface emissivity(ε) is important both for the retrieval of surface temperatures and the calculation of the longwave surface energy budgets.Since ε is one of the important parameterizations in land surface models(LSMs),accurate accounting also improves the accuracy of surface temperatures and sensible heat fluxes simulated by LSMs.In order to obtain an accurate emissivity,this paper focuses on estimating ε from data collected in the hinterland of Taklimakan Desert by two different methods.In the first method,ε was derived from the surface broadband emissivity in the 8–14 μm thermal infrared atmospheric window,which was determined from spectral radiances observed by field measurements using a portable Fourier transform infrared spectrometer,the mean ε being 0.9051.The second method compared the observed and calculated heat fluxes under nearneutral atmospheric stability and estimated ε indirectly by minimizing the root-mean-square difference between them.The result of the second method found a mean value of 0.9042,which is consistent with the result by the first method.Although the two methods recover ε from different field experiments and data,the difference of meanvalues is 0.0009.The first method is superior to the indirect method,and is also more convenient.     

Predicting TBM penetration rate in hard rock condition: A comparative study among six XGB-based metaheuristic techniques

A reliable and accurate prediction of the tunnel boring machine(TBM) performance can assist in minimizing the relevant risks of high capital costs and in scheduling tunneling projects.This research aims to develop six hybrid models of extreme gradient boosting(XGB) which are optimized by gray wolf optimization(GWO), particle swarm optimization(PSO), social spider optimization(SSO), sine cosine algorithm(SCA), multi verse optimization(MVO) and moth flame optimization(MFO), for estimation of the TBM penetration rate(PR).To do this, a comprehensive database with 1286 data samples was established where seven parameters including the rock quality designation, the rock mass rating, Brazilian tensile strength(BTS), rock mass weathering, the uniaxial compressive strength(UCS), revolution per minute and trust force per cutter(TFC), were set as inputs and TBM PR was selected as model output.Together with the mentioned six hybrid models, four single models i.e., artificial neural network, random forest regression, XGB and support vector regression were also built to estimate TBM PR for comparison purposes.These models were designed conducting several parametric studies on their most important parameters and then, their performance capacities were assessed through the use of root mean square error, coefficient of determination, mean absolute percentage error, and a10-index.Results of this study confirmed that the best predictive model of PR goes to the PSO-XGB technique with system error of(0.1453, and 0.1325), R~2 of(0.951, and 0.951), mean absolute percentage error(4.0689, and 3.8115), and a10-index of(0.9348, and 0.9496) in training and testing phases, respectively.The developed hybrid PSO-XGB can be introduced as an accurate, powerful and applicable technique in the field of TBM performance prediction.By conducting sensitivity analysis, it was found that UCS, BTS and TFC have the deepest impacts on the TBM PR.     

Analysis of the interannual variability of annual daily extreme water levels in the St Lawrence River and Lake Ontario from 1918 to 2010

We compared the interannual variability of annual daily maximum and minimum extreme water levels in Lake Ontario and the St Lawrence River (Sorel station) from 1918 to 2010, using several statistical tests. The interannual variability of annual daily maximum extreme water levels in Lake Ontario is characterized by a positive long‐term trend showing two shifts in mean (1929–1930 and 1942–1943) and a single shift in variance (in 1958–1959). In contrast, for the St Lawrence River, this interannual variability is characterized by a negative long‐term trend with a single shift in mean, which occurred in 1955–1956. As for annual daily minimum extreme water levels, their interannual variability shows no significant long‐term change in trend. However, for Lake Ontario, the interannual variability of these water levels shows two shifts in mean, which are synchronous with those for maximum water levels, and a single shift in variance, which occurred in 1965–1966. These changes in trend and stationarity (mean and variance) are thought to be due to factors both climatic (the Great Drought of the 1930s) and human (digging of the Seaway and construction of several dams and locks during the 1950s). Despite this change in means and variance, the four series are clearly described by the generalized extreme value distribution. Finally, annual daily maximum and minimum extreme water levels in the St Lawrence and Lake Ontario are negatively correlated with Atlantic multidecadal oscillation over the period from 1918 to 2010. Copyright © 2013 John Wiley & Sons, Ltd.     

Dissolved inorganic carbon evolution in neutral discharge from mine tailings piles

We measured the concentrations of dissolved inorganic carbon (DIC) and major ions and the stable carbon isotope ratios of DIC (δ¹³C_DIC) in two creeks discharging from carbonate‐rich sulphide‐containing mine tailings piles. Our aim was to assess downstream carbon evolution of the tailings discharge as it interacted with the atmosphere. The discharge had pH of 6.5–8.1 and was saturated with respect to carbonates. Over the reach of one creek, the DIC concentrations decreased by 1.1 mmol C/l and δ¹³C_DIC increased by ~4.0‰ 200 m from the seep source. The decrease in the DIC concentrations was concomitant with decreases in the partial pressure of CO_2(aq) because of the loss of excess CO_2(aq) from the discharge. The corresponding enrichment in the δ¹³C_DIC is because of kinetic isotope fractionation accompanying the loss of CO_2(g). Over the reach of the other creek, there was no significant decrease in the DIC concentrations or notable changes in the δ¹³C_DIC. The insignificant change in the DIC concentrations and the δ¹³C_DIC is because the first water sample was collected 160 m away from the discharge seep, not accessible during this research. In this case, most of the excess CO_2(aq) was lost before our first sampling station. Our results indicate that neutral discharges from tailings piles quickly lose excess CO_2(aq) to the atmosphere and the DIC becomes enrich in ¹³C. We suggest that a significant amount of carbon cycling in neutral discharges from tailings piles occur close to the locations where the discharge seeps to the surface. Copyright © 2015 John Wiley & Sons, Ltd.