Fisher Matrix-based Predictions for Measuring the <Emphasis Type="Italic">z</Emphasis> = 3.35 Binned 21-cm Power Spectrum using the Ooty Wide Field Array (OWFA)

We use the Fisher matrix formalism to predict the prospects of measuring the redshifted 21-cm power spectrum in different k-bins using observations with the upcoming Ooty Wide Field Array (OWFA) which will operate at 326.5 MHz. This corresponds to neutral hydrogen (HI) at z = 3.35, and a measurement of the 21-cm power spectrum provides a unique method to probe the large-scale structures at this redshift. Our analysis indicates that a 5σ detection of the binned power spectrum is possible in the k range 0.05 ≤ k ≤ 0.3 Mpc^?1 with 1000 hours of observation. We find that the signal- to-noise ratio (SNR) peaks in the k range 0.1?0.2 Mpc^?1 where a 10σ detection is possible with 2000 hours of observations. Our analysis also indicates that it is not very advantageous to observe beyond 1000 h in a single field-of-view as the SNR increases rather slowly beyond this in many of the small k-bins. The entire analysis reported here assumes that the foregrounds have been completely removed.     

A traversing system to measure bottom boundary layer hydraulic properties

This study describes a new convenient and robust system developed to measure benthic boundary layer properties, with emphasis placed on the determination of bed shear stress and roughness height distribution within estuarine systems by using velocity measurements. This system consisted of a remotely operated motorised traverser that allowed a single ADV to collect data between 0 and 1 m above the bed. As a case study, we applied the proposed traversing system to investigate bottom boundary layer (BBL) hydraulic properties within Coombabah Creek, Queensland, Australia. Four commonly-employed techniques: (1) Log-Profile (LP); (2) Reynolds stress (RS); (3) Turbulent Kinetic Energy (TKE); and (4) Inertial Dissipation (ID) used to estimate bed shear stresses from velocity measurements were compared. Bed shear stresses estimated with these four methods agreed reasonably well; of these, the LP method was found to be most useful and reliable. Additionally, the LP method permits the calculation of roughness height, which the other three methods do not. An average value of bed shear stress of 0.46 N/m², roughness height of 4.3 mm, and drag coefficient of 0.0054 were observed within Coombabah Creek. Results are consistent with that reported for several other silty bed estuaries.     

Estimation of the Land Surface Emissivity in the Hinterland of Taklimakan Desert

An accurate accounting of land surface emissivity(ε) is important both for the retrieval of surface temperatures and the calculation of the longwave surface energy budgets.Since ε is one of the important parameterizations in land surface models(LSMs),accurate accounting also improves the accuracy of surface temperatures and sensible heat fluxes simulated by LSMs.In order to obtain an accurate emissivity,this paper focuses on estimating ε from data collected in the hinterland of Taklimakan Desert by two different methods.In the first method,ε was derived from the surface broadband emissivity in the 8–14 μm thermal infrared atmospheric window,which was determined from spectral radiances observed by field measurements using a portable Fourier transform infrared spectrometer,the mean ε being 0.9051.The second method compared the observed and calculated heat fluxes under nearneutral atmospheric stability and estimated ε indirectly by minimizing the root-mean-square difference between them.The result of the second method found a mean value of 0.9042,which is consistent with the result by the first method.Although the two methods recover ε from different field experiments and data,the difference of meanvalues is 0.0009.The first method is superior to the indirect method,and is also more convenient.     

Salt tectonics in a double salt‐source layer setting (Eastern Persian Gulf,Iran): Insights from interpretation of seismic profiles and sequential cross‐section restoration

Salt tectonics in the Eastern Persian Gulf (Iran) is linked to a unique salt‐bearing system involving two overlapping ‘autochthonous’ mobile source layers, the Ediacaran–Early Cambrian Hormuz Salt and the Late Oligocene–Early Miocene Fars Salt. Interpretations of reflection seismic profiles and sequential cross‐section restorations are presented to decipher the evolution of salt structures from the two source layers and their kinematic interaction on the style of salt flow. Seismic interpretations illustrate that the Hormuz and Fars salts started flowing in the Early Palaeozoic (likely Cambrian) and Early Miocene, respectively, shortly after their deposition. Differential sedimentary loading (downbuilding) and subsalt basement faults initiated and localized the flow of the Hormuz Salt and the related salt structures. The resultant diapirs grew by passive diapirism until Late Cretaceous, whereas the pillows became inactive during the Mesozoic after a progressive decline of growth in the Late Palaeozoic. The diapirs and pillows were then subjected to a Palaeocene–Eocene contractional deformation event, which squeezed the diapirs. The consequence was significant salt extrusion, leading to the development of allochthonous salt sheets and wings. Subsequent rise of the Hormuz Salt occurred in wider salt stocks and secondary salt walls by coeval passive diapirism and tectonic shortening since Late Oligocene. Evacuation and diapirism of the Fars Salt was driven mainly by differential sedimentary loading in annular and elongate minibasins overlying the salt and locally by downslope gliding around pre‐existing stocks of the Hormuz Salt. At earlier stages, the Fars Salt flowed not only towards the pre‐existing Hormuz stocks but also away from them to initiate ring‐like salt walls and anticlines around some of the stocks. Subsequently, once primary welds developed around these stocks, the Fars Salt flowed outwards to source the peripheral salt walls. Our results reveal that evolving pre‐existing salt structures from an older source layer have triggered the flow of a younger salt layer and controlled the resulting salt structures. This interaction complicates the flow direction of the younger salt layer, the geometry and spatial distribution of its structures, as well as minibasin depocentre migration through time. Even though dealing with a unique case of two ‘autochthonous’ mobile salt layers, this work may also provide constraints on our understanding of the kinematics of salt flow and diapirism in other salt basins having significant ‘allochthonous’ salt that is coevally affected by deformation of the deeper autochthonous salt layer and related structures.     

Curie Point Depth Estimations for Northwest Iran Through Spectral Analysis of Aeromagnetic Data for Geothermal Resources Exploration

Natural Resources Research - The northwest of Iran is considered as a promising geothermal zone owing to its geographical properties, tectonic features, and thermal activities, particularly in...     

3D Structural,Facies and Petrophysical Modeling of C Member of Six Hills Formation,Komombo Basin,Upper Egypt

Natural Resources Research - Two main reservoirs are producing in Komombo Basin: the first one belongs to the C Member of the Six Hills Formation, and the second belongs to the Albian/Cenomanian...     

Economic analysis for the production of four grape cultivars using microcatchment water harvesting systems in Iran

An economic analysis was conducted for temporal yield variations of four local grape cultivars grown in rain-fed microcatchments in the Bajgah area of Fars province, in Islamic Republic of Iran. For this study, four local cultivars of grapes were considered. The cultivars examined were Black Rishbaba, Rotabi, Asgari and Black grapes. The soil type was a gravely loam with an average slope of 5–6%, in microcatchment systems, and in plots without microcatchments. Analysis of yield data with a multiple regression model indicated that a 9 m² (3×3 m) microcatchment area for each individual plant (vine) was the most appropriate area for vineyards in this region. The results also demonstrated that by using this area for each grapevine, yields (kg/ha) were 40% greater than yields obtained for vines in the standard vineyard (without microcatchments) in this area. Economic analysis was performed and the cost and income were compared for a depreciation period (life-span period) of 50 years and interest rate of 14%. The analysis showed that a microcatchment area of 9 m² is economically feasible. The Black Rishbaba rain-fed vines were the most suitable cultivar for this region. The benefit probabilities of rain-fed Black Rishbaba, Rotabi, Asgari and Black grapes with a microcatchment area of 9 m² and without such an area were 63.3% (i.e. two of 3 years), 52.4% (i.e. one of 2 years), 32.9% (i.e. one of 3 years), 13.3% (i.e. one of 8 years), and 59.5% (i.e. two of 3 years), 39.4% (i.e. two of 5 years), 31.8% (i.e. one of 3 years), and 10.7% (i.e. one of 9 years), respectively. Therefore, the Black Rishbaba and Rotabi cultivars are economically more stable in microcatchment system, while only the Black Rishbaba cultivar would be such in the standard vineyard system.     

Synchronising geometric representations for map mashups using relative positioning and Linked Data

Map mashups, as a common way of presenting geospatial information on the Web, are generally created by spatially overlaying thematic information on top of various base maps. This simple overlay approach often raises geometric deficiencies due to geometric uncertainties in the data. This issue is particularly apparent in a multi-scale context because the thematic data seldom have synchronised level of detail with the base map. In this study, we propose, develop, implement and evaluate a relative positioning approach based on shared geometries and relative coordinates to synchronise geometric representations for map mashups through several scales. To realise the relative positioning between datasets, we adopt a Linked Data–based technical framework in which the data are organised according to ontologies that are designed based on the GeoSPARQL vocabulary. A prototype system is developed to demonstrate the feasibility and usability of the relative positioning approach. The results show that the approach synchronises and integrates the geometries of thematic data and the base map effectively, and the thematic data are automatically tailored for multi-scale visualisation. The proposed framework can be used as a new way of modelling geospatial data on the Web, with merits in terms of both data visualisation and querying.