Model‐based attenuation for scattered dispersive waves

Coherent noise in land seismic data primarily consists in source‐generated surface‐wave modes. The component that is traditionally considered most relevant is the so‐called ground roll, consisting in surface‐wave modes propagating directly from sources to receivers. In many geological situations, near?surface heterogeneities and discontinuities, as well as topography irregularities, diffract the surface waves and generate secondary events, which can heavily contaminate records. The diffracted and converted surface waves are often called scattered noise and can be a severe problem particularly in areas with shallow or outcropping hard lithological formations. Conventional noise attenuation techniques are not effective with scattering: they can usually address the tails but not the apices of the scattered events. Large source and receiver arrays can attenuate scattering but only in exchange for a compromise to signal fidelity and resolution. We present a model?based technique for the scattering attenuation, based on the estimation of surface‐wave properties and on the prediction of surface waves with a complex path involving diffractions. The properties are estimated first, to produce surface?consistent volumes of the propagation properties. Then, for all gathers to filter, we integrate the contributions of all possible diffractors, building a scattering model. The estimated scattered wavefield is then subtracted from the data. The method can work in different domains and copes with aliased surface waves. The benefits of the method are demonstrated with synthetic and real data.     

Interaction of surface waves at very close wavenumbers

We show that interaction of two monochromatic waves at the water surface enters a different dynamic regime if their wavenumbers become very close. The study is conducted by means of a fully nonlinear wave model. In the course of evolution of the two waves, downshifting of the initial wave energy and growth of the first mode occur depending on wave steepness and dk/k. Behaviour of these features changes if dk/k?<?0.0025: both downshifting and growth rate become independent of dk/k, accompanied by rapid transfer of wave energy to large scales.     

Numerical modeling of 3D fully nonlinear potential periodic waves

A simple and exact numerical scheme for long-term simulations of 3D potential fully nonlinear periodic gravity waves is suggested. The scheme is based on the surface-following nonorthogonal curvilinear coordinate system. Velocity potential is represented as a sum of analytical and nonlinear components. The Poisson equation for the nonlinear component of velocity potential is solved iteratively. Fourier transform method, the second-order accuracy approximation of vertical derivatives on a stretched vertical grid and the fourth-order Runge–Kutta time stepping are used. The scheme is validated by simulation of steep Stokes waves. A one-processor version of the model for PC allows us to simulate evolution of a wave field with thousands degrees of freedom for hundreds of wave periods. The scheme is designed for investigation of nonlinear 2D surface waves, generation of extreme waves, and direct calculations of nonlinear interactions.     

Facilitating adaptation of biodiversity to climate change: a conceptual framework applied to the world’s largest Mediterranean-climate woodland

The importance of ecological management for reducing the vulnerability of biodiversity to climate change is increasingly recognized, yet frameworks to facilitate a structured approach to climate adaptation management are lacking. We developed a conceptual framework that can guide identification of climate change impacts and adaptive management options in a given region or biome. The framework focuses on potential points of early climate change impact, and organizes these along two main axes. First, it recognizes that climate change can act at a range of ecological scales. Secondly, it emphasizes that outcomes are dependent on two potentially interacting and countervailing forces: (1) changes to environmental parameters and ecological processes brought about by climate change, and (2) responses of component systems as determined by attributes of resistance and resilience. Through this structure, the framework draws together a broad range of ecological concepts, with a novel emphasis on attributes of resistance and resilience that can temper the response of species, ecosystems and landscapes to climate change. We applied the framework to the world’s largest remaining Mediterranean-climate woodland, the ‘Great Western Woodlands’ of south-western Australia. In this relatively intact region, maintaining inherent resistance and resilience by preventing anthropogenic degradation is of highest priority and lowest risk. Limited, higher risk options such as fire management, protection of refugia and translocation of adaptive genes may be justifiable under more extreme change, hence our capacity to predict the extent of change strongly impinges on such management decisions. These conclusions may contrast with similar analyses in degraded landscapes, where natural integrity is already compromised, and existing investment in restoration may facilitate experimentation with higher risk?options.     

A gridded monthly upper-air data set from 1918 to 1957

Significant efforts have been devoted in recent years towards extending observation-based three-dimensional atmospheric data sets back in time. Such data sets form an important basis for a better understanding of the climate system. Here we present a new monthly three-dimensional global data set that is based on historical upper-air data and surface data. We use statistical reconstruction techniques, calibrated using ERA-40 data, to obtain gridded data from the numerous, but scattered and heterogeneous historical upper-air observations. In contrast to previous work, in which we used hemispheric principal components on both the predictor and the predictand side to reconstruct spatially complete fields back to 1880, we restrict the procedure to places and times where upper-air observations are available. Each grid column (consisting of four variables at six levels) is then reconstructed independently using only predictor variables in the vicinity (i.e., only local stationarity is required rather than stationary large-scale patterns). The product, termed REC2, is a gridded, global monthly data set of geopotential height, temperature, and u and v wind from 850 to 100?hPa back to 1918. The data set is sparse (i.e., many grid cells are empty), but provides an alternative to large-scale reconstructions as it allows for non-stationary teleconnections. We show the results of several validation experiments, compare our new data set with a number of existing data sets, and demonstrate that it is suitable for analysing large-scale climate variability on interannual time-scales.     

A waveguide-based flexible CO2-laser heating system for diamond-anvil cell applications

Fiber-based laser heating systems offer high flexibility and are increasingly used in high-pressure/high-temperature research. Previous fiber-based laser heating systems were based on lasers delivering radiation with 1-μm wavelength that show unfavorable heating characteristics for many sample materials. We report on the development and first experiments of a waveguide (fiber)-based CO₂-laser heating system that can be used in a flexible manner for high-temperature research and for high-pressure/temperature experiments when combined with diamond-anvil cells. The waveguide-based CO₂-laser heating system allows convenient heating of optically transparent samples without the need for adding an additional laser absorber. In a pilot experiment, the flexible heating system has been installed on a Brillouin scattering system to measure high-temperature sound-wave velocities in single-crystal MgO. The waveguide-based CO₂-laser heating system offers perspectives for a variety of scientific applications, most importantly those that require the use of synchrotron facilities where space is limited and flexible solutions are required.     

天山现今地壳运动的形变场分析

对天山地区GPS测量成果进行系统处理,获得了整体天山相对于欧亚大陆的现今地壳运动的212个GPS站速度场结果,再现了受印度板块向北推挤作用下天山地区相对欧亚板块的水平构造变形分布状态。天山地区GPS速度场表明,天山地壳缩短由南向北、由西向东递减,表明板块的推挤作用力随着天山的褶皱变形相应减弱;西天山的变形强于东天山的主要原因可能是西部帕米尔高原对天山的直接俯冲推挤作用的结果;而东天山的构造活动则是塔里木块体对其缓慢推挤的结果。     

Chronology of meteorites and the early solar system

Understanding the chronology of the chondritic and differentiated meteorites can potentially important constraints on the accretion and origin of the solar system planets, life-time of our protoplanetary disk and circumstellar disks around solar mass stars, and astrophysical setting of the solar system formation. The special issue of Geochimica et Cosmochimica Acta consists of invited and contributed papers presented at the Workshop on The Chronology of Meteorites and the Early Solar System, Kauai, 2007 and is honoring the outstanding contributions of C.J. Allégre, G.W. Lugmair, L.E. Nyquist, D.A. Papanastassiou, and G.J. Wasserburg to our understanding of the chronology of the early Solar System.