Community structure and dynamics of deep-water decapod assemblages from Le Danois Bank (Cantabrian Sea, NE Atlantic): Influence of environmental variables and food availability

The community structure of the decapod crustaceans inhabiting Le Danois Bank (Cantabrian Sea, NE Atlantic Ocean) was studied on two cruises performed in October 2003 and April 2004. Otter and beam-trawls were used to collect this fauna. At depths ranging between 455 and 1048 m, we found distinct decapod assemblages on the bank summit and deeper in the inner basin (between the bank and the continental shelf). The faunal discontinuity between these groups appeared at around 600 m (e.g. between 612 and 642 m in the basis of species replacement). The summit assemblage was characterized by low diversity (in terms of number and relative abundances of species) and by the dominance of hermit crabs (Pagurus alatus, Anapagurus laevis, Pagurus excavatus), the crangonid Pontophilus spinosus and the squat lobster Munida sarsi. Species characterizing the deeper assemblage, which was richer in terms of diversity, were Munida tenuimana, Parapagurus pilosimanus, Pontophilus norvegicus, the crab Geryon trispinosus and a number of bathypelagic shrimps (Sergia robusta, Acanthephyra pelagica and Pasiphaea tarda). Changes in decapod composition characterized by multidimensional scaling analyses were correlated with different variables, e.g. %mud and %organic matter (OM), temperature and salinity close to the bottom. Among those the %OM and %mud in sediments affected decapod distributions the most. The summit of the bank was covered by fine sediments with low proportion of mud (13.9–29.3%) and OM (2.55–3.50%). By contrast, sediment of the inner basin had a higher proportion of OM and mud (64.1–84.2%; 6.26–7.00%, respectively). The low proportion of mud at the summit of Le Danois Bank may explain the absence or scarcity of burrowing species (e.g. the lobster Nephrops norvegicus, the shrimps Calocaris macandreae and Alpheus glaber and the crab Goneplax rhomboides), that are dominant at similar depths (400–500 m) in the upper muddy assemblage on the mainland-continental slope in the Bay of Biscay (44–46°N). The dominance of certain species on the summit of submarine mounts can probably be related to their biology and feeding ecology. For example, pagurids are deposit feeders, even consuming marine snow (e.g. Chl-a identified in guts of Pagurus alatus), and they have low gut fullness (probably indicating a capacity to withstand long periods under starvation), that would favour their adaptability to a rather unpredictable habitat such as Le Danois Bank summit. Regarding prey availability, zooplankton/micronekton and infauna distributed around Le Danois Bank showed different depth-related patterns. Among zooplankton, mesopelagic decapods, mysids, and fishes were absent at the bank summit, while euphausiids exhibited high abundances over the summit. No significant trends with depth were found for infauna abundance, and for instance polychaete densities were similar both at the summit and the inner basin. Therefore, prey availability was lower for summit assemblages regarding zooplankton/micronekton. Patterns in mean size vs. depth were species specific for decapods, and the possible role of the bank summit as a recruitment area was not general for the whole decapod assemblage.     

Groundwater flow model, recharge estimation and sustainability in an arid region of Patagonia, Argentina

The Península Valdés, in northeastern Patagonia, Argentina, is characterised by its arid climate and the lack of perennial watercourses; thus, all economic activities depend on the groundwater resources. Water demand is mainly associated with tourism, which is centralised in Puerto Pirámides and supplied by a water desalination plant, and to sheep farming, supplied by the local aquifer. Due to the exponential growth of tourism, the government is planning to exploit groundwater and convey it by aqueduct to the abovementioned locality. The objectives of this study were to corroborate the conceptual geohydrological model, to develop a mathematical model to simulate the response of the aquifer to different scenarios, and to assess the incidence of water input into the system as a variable—a function that poses difficulties in the models for arid regions. The Visual Modflow 4.1 code was used, calibrating it in trial-and-error mode, changing the recharge and hydraulic conductivity parameters with different variants in the recharge zone and in the inclusion or exclusion of the evapotranspiration module. Results indicate the importance of the recharge analysis by treating rainfall at daily time steps. The adjusted model was exposed to four scenarios with variations in water input and in output by pumping. It can be concluded that under different input conditions, but with a controlled extraction, the system responds in a sustainable manner.     

Post glacial lacustrine event sedimentation in an ancient mountain setting: Carboniferous Lake Malanzán (Western Argentina)

Lacustrine deposits of the Malanzán Formation record sedimentation in a small and narrow mountain paleovalley. Lake Malanzán was one of several water bodies formed in the Paganzo Basin during the Late Carboniferous deglaciation. Five sedimentary facies have been recognized. Facies A (Dropstones-bearing laminated mudstones) records deposition from suspension fall-out and probably underflow currents coupled with ice-rafting processes in a basin lake setting. Facies B (Ripple cross-laminated sandstones and siltstones) was deposited from low density turbidity currents in a lobe fringe environment. Facies C (Massive or graded sandstones) is thought to represent sedimentation from high and low density turbidity currents in sand lobes. Facies D (Folded sandstones and siltstones) was formed from slumping in proximal lobe environments. Facies E (Wave-rippled sandstones) records wave reworking of sands supplied by turbidity currents above wave base level.The Lake Malanzán succession is formed by stacked turbidite sand lobe deposits. These lobes were probably formed in proximal lacustrine settings, most likely relatively high gradient slopes. Paleocurrents indicate a dominant direction from cratonic areas to the WSW. Although the overall sequence shows a regressive trend from basin fine-grained deposits to deltaic and braided fluvial facies, individual lobe packages lack of definite vertical trends in bed thickness and grain size. This fact suggests aggradation from multiple-point sources, rather than progradation from single-point sources. Sedimentologic and paleoecologic evidence indicate high depositional rate and sediment supply. Deposition within the lake was largely dominated by event sedimentation. Low diversity trace fossil assemblages of opportunistic invertebrates indicate recolonization of event beds under stressed conditions.Three stages of lake evolutionary history have been distinguished. The vertical replacement of braided fluvial deposits by basinal facies indicates high subsidence and a lacustrine transgressive episode. This flooding event was probably linked to a notable base level rise during postglacial times. The second evolutionary stage was typified by the formation of sand turbidite lobes from downslope mass-movements. Lake history culminates with the progradation of deltaic and braided fluvial systems     

SlugIn 1.0: A Free Tool for Automated Slug Test Analysis

The correct characterization of aquifer parameters is essential for water‐supply and water‐quality investigations. Slug tests are widely used for these purposes. While free software is available to interpret slug tests, some codes are not user‐friendly, or do not include a wide range of methods to interpret the results, or do not include automatic, inverse solutions to the test data. The private sector has also generated several good programs to interpret slug test data, but they are not free of charge. The computer program SlugIn 1.0 is available online for free download, and is demonstrated to aid in the analysis of slug tests to estimate hydraulic parameters. The program provides an easy‐to‐use Graphical User Interface. SlugIn 1.0 incorporates automated parameter estimation and facilitates the visualization of several interpretations of the same test. It incorporates solutions for confined and unconfined aquifers, partially penetrating wells, skin effects, shape factor, anisotropy, high hydraulic conductivity formations and the Mace test for large‐diameter wells. It is available in English and Spanish and can be downloaded from the web site of the Geological Survey of Spain. Two field examples are presented to illustrate how the software operates.     

Frontal dynamics boost primary production in the summer stratified Mediterranean sea

Bio-physical glider measurements from a unique process-oriented experiment in the Eastern Alboran Sea (AlborEx) allowed us to observe the distribution of the deep chlorophyll maximum (DCM) across an intense density front, with a resolution (～ 400 m) suitable for investigating sub-mesoscale dynamics. This front, at the interface between Atlantic and Mediterranean waters, had a sharp density gradient (Δρ ～ 1 kg/m³ in ～ 10 km) and showed imprints of (sub-)mesoscale phenomena on tracer distributions. Specifically, the chlorophyll-a concentration within the DCM showed a disrupted pattern along isopycnal surfaces, with patches bearing a relationship to the stratification (buoyancy frequency) at depths between 30 and 60 m. In order to estimate the primary production (PP) rate within the chlorophyll patches observed at the sub-surface, we applied the Morel and Andrè (J Geophys Res 96:685–698 1991) bio-optical model using the photosynthetic active radiation (PAR) from Argo profiles collected simultaneously with glider data. The highest production was located concurrently with domed isopycnals on the fresh side of the front, suggestive that (sub-)mesoscale upwelling is carrying phytoplankton patches from less to more illuminated levels, with a contemporaneous delivering of nutrients. Integrated estimations of PP (1.3 g C m^?2d^?1) along the glider path are two to four times larger than the estimations obtained from satellite-based algorithms, i.e., derived from the 8-day composite fields extracted over the glider trip path. Despite the differences in spatial and temporal sampling between instruments, the differences in PP estimations are mainly due to the inability of the satellite to measure DCM patches responsible for the high production. The deepest (depth > 60 m) chlorophyll patches are almost unproductive and probably transported passively (subducted) from upper productive layers. Finally, the relationship between primary production and oxygen is also investigated. The logarithm of the primary production in the DCM interior (chlorophyll (Chl) > 0.5 mg/m³) shows a linear negative relationship with the apparent oxygen utilization, confirming that high chlorophyll patches are productive. The slope of this relationship is different for Atlantic, mixed interface waters and Mediterranean waters, suggesting the presence of differences in planktonic communities (whether physiological, population, or community level should be object of further investigation) on the different sides of the front. In addition, the ratio of optical backscatter to Chl is high within the intermediate (mixed) waters, which is suggestive of large phytoplankton cells, and lower within the core of the Atlantic and Mediterranean waters. These observations highlight the relevance of fronts in triggering primary production at DCM level and shaping the characteristic patchiness of the pelagic domain. This gains further relevance considering the inadequacy of optical satellite sensors to observe DCM concentrations at such fine scales.     

Ice-Core Study of the Link between Sea-Salt Aerosol,Sea-Ice Cover and Climate in the Antarctic Peninsula Area

Three ice cores and a set of snow pit samples collected on James Ross Island, Antarctic Peninsula, in 1979, 1981 and 1991 have been analyzed for water stable isotope content D or ¹⁸O (isotopic temperature) and major chemical species. A reliable and detailed chronological scale has been established first for the upper 24.5 m of water equivalent (1990–1943) where various data sets can be compared, then extended down to 59.5 m of water equivalent (1847) with the aid of seasonal variations and the sulphate peak reflecting the 1883 Krakatoa volcanic eruption. At James Ross Island, sea-salt aerosol is generally produced by ice-free marine surfaces during the summer months, although some winter sea-salt events have been observed. For the upper part of the core (1990–1943), correlations (positive or negative) were calculated between isotopic temperature, chloride content (a sea-salt indicator), sea-ice extent, regional atmospheric temperature changes and atmospheric circulation. The D and chloride content correlation was then extended back to 1847, making it possible to estimate decadal sea-ice cover fluctuations over the study period. Our findings suggest that ice-core records from James Ross Island reflect the recent warming and sea-ice decrease trends observed in the Antarctic Peninsula area from the mid-1940s.     

Landslide HotSpot Mapping by means of Persistent Scatterer Interferometry

Landslide detection and mapping represent fundamental requirements for every hazard and risk evaluation and consequent improvement of the management strategies for such natural hazards. Optical and radar remote sensing can be used to observe landslide-induced ground deformation, ranging from regional to local scales. This work presents a methodology called Landslide HotSpot Mapping; this approach integrates cartographic, thematic and optical data with Persistent Scatterer Interferometry for the identification of extremely slow to very slow moving landslides, and for the evaluation of their state of activity and intensity. This methodology scans wide areas to detect hotspots, which are narrow unstable zones characterized by higher landslide hazard. To these hotspots, priority has to be given when planning field surveys and in situ validation campaigns, so that field work time and effort can be optimized and significantly reduced. The approach is tested in Central Calabria, over a 4,470?km² area located in southern Italy. ENVISAT ascending images acquired between 2003 and 2009 and processed with the Persistent Scatterer Pairs (PSP) technique are used to analyse deformation patterns. Combining conventional photo-interpretation with the analysis of PSP data, 64 new landslides are identified and the spatial (boundaries) and temporal (activity) information of 980 pre-mapped phenomena (23.6% of updated inventory) are updated. 1,012 active (continuous or reactivated) landslides are identified and 4 hotspot areas selected: San Fili, Rende, Lago, Catanzaro. Urgent field checks have to be organized for these hotspots to validate the satellite-based observations and to design appropriate mitigation measures to reduce impacts on the elements at risk.     

Statistical analysis of the temperature records for the Northern Territory of Australia

The Northern Territory of Australia has a unique situation of an extension larger than France and a population of 200,000, with only three meteorology stations open for more than 40 years, Darwin (DW), Alice Springs (AS) and Tennant Creek, and only two of them, DW and AS, providing data over 100 years, and from 500 to more than 1,000 km separating these stations and the stations in the neighbouring states of Australia. Homogenizations of data in between different measuring sites for the same location as well as the way to derive the missed data to complete at least 100 years from the neighbouring locations are analysed in details and the effects on the temperature trends are straightforwardly investigated. Using properly homogenised data over 130 years and a linear fitting, the warming maximum and minimum temperatures are +0.009 and +0.057 °C/10 years for Alice Springs and ?0.025 and 0.064 °C/10 years for Darwin. With the data available, the only option to produce warming trends is to overweight the cold years in the middle of the 1970s and the subsequent return to warmer temperatures. Starting from 1980, to compute trends, there is still a clear warming in Alice Springs, but also clear cooling in Tennant Creek, and a mixed behaviour with warming maximum temperatures and cooling minimum temperatures in Darwin.