Determination of Meteoroid Orbits and Spatial Fluxes by Using High-Resolution All-Sky CCD Cameras

By using high-resolution, low-scan-rate, all-sky CCD cameras, the SPanish Meteor Network (SPMN) is currently monitoring meteor and fireball activity on a year round basis. Here are presented just a sampling of the accurate trajectory, radiant and orbital data obtained for meteors imaged simultaneously from two SPMN stations during the continuous 2006–2007 coverage of meteor and fireball monitoring. Typical astrometric uncertainty is 1–2 arc min, while velocity determination errors are of the order of 0.1–0.5 km/s, which is dependent on the distance of each event to the station and its particular viewing geometry. The cameras have demonstrated excellent performance for detecting meteor outbursts. The recent development of automatic detection software is also providing real-time information on the global meteor activity. Finally, some examples of the all-sky CCD cameras applications for detecting unexpected meteor activity are given.     

Natural and anthropogenic C2 to C6 hydrocarbons in the central-eastern Venezuelan atmosphere during the rainy season

The levels of low molecular weight hydrocarbons were measured at pristine sites and rural locations affected by hydrocarbon emissions from oil and gas producing fields in Venezuela. At the clean sites, lower concentrations of C₂ to C₆ alkanes were observed, whereas, in comparison with remotes sites, very much higher levels were measured at the polluted sites. Alkenes present relatively high concentrations, with isoprene being the most abundant, all over the study region. The main sources of alkenes are likely to be natural, mainly from vegetation. The levels of alkanes recorded at the clean sites and the alkene levels found everywhere in the region are in agreement with the values reported for other clean sites in the tropics. The increase of ozone production capacity due to the anthropogenic emissions of alkanes from oil and gas fields was estimated. Due to the presence in the atmosphere of important amounts of naturally emitted isoprene, ethene and propene, which makes a substantial contribution to the reactivity of the hydrocarbon mixture, a small increase (<5%) was estimated to occur in the capacity of the ozone production at a regional scale during the rainy season.     

Using distributed temperature sensing (DTS) technology in acid gas injection design

The use of slickline distributed temperature sensing (SL-DTS) technology is becoming widespread due to its ease of operation and ability to acquire real-time multiple temperature traces inside the wellbore. Injection of treated acid gas (TAG)—a mixture of CO₂ and H₂S—into geologic formations has become an attractive technical and economic option for oil and gas producers and processors who are faced with regulations concerning excess sulfur and greenhouse gas emissions. Acid gas injection (AGI) into geologic formations is more economical and more flexible in dealing with varying TAG compositions than sulfur recovery units (SRUs) using the Claus process. SRUs do not achieve air quality standards and have high operation and maintenance costs. In addition, there is low demand for sulfur and sulfur disposal costs are high. The results of the analysis of SL-DTS data acquired in conjunction with step rate and pressure falloff (PFO) tests are presented in this paper. These tests were conducted to evaluate the injection potential of geologic formations. The injection zone consisted of a carbonate formation characterized by Karst features, vugs, and natural fractures. The SL-DTS data during the initial injection flow rate for the step rate test (SRT) indicated that high permeability zones accepted fluid at lower injection rates. An increasing number of discrete zones began to accept fluid as the injection rate was increased. The results of the SRT provided the fracture pressure of the formation. This information was used to design an AGI program that would avoid fracturing the formation while allowing for the required volume of TAG to be injected. The results of the PFO test provided information on the reservoir pressure and permeability and also indicated the presence of one or more hydraulic fractures. This case study of SL-DTS measurements made during a SRT and a PFO test for the design of an AGI well provides valuable insights into the potential of DTS technology and its use in AGI and carbon capture/sequestration (CCS) operations. Its findings could be applied to analyze injection potential of geological formations not only for AGI projects but also for CCS, and CO₂ enhanced oil recovery opportunities.     

Technical, financial and location criteria for the design of land application system treatment

Conventional water treatments when downsized to cover the demands of small and scattered populations are costly and ineffective. In fact, many small towns cannot afford the high average treatment costs nor provide the skill and complex management requirements. Even when these facilities are available, waste water might not be properly treated. Land application system treatments (LAST) have been shown to be preferable on the basis of their technical effectiveness and financial viability. The recently approved Spanish regulations (RDL 1620/2007, pp 50369–50661) represent an opportunity for the implementation of well-designed LASTs. This paper presents an assessment methodology for the design of LASTs by combining technical, financial and location criteria. The method is applied to the design of LASTs to cover the water disposal demand of twelve municipalities located within the protected natural landscape, and surrounding areas of ‘El Rebollar’, Salamanca, Spain.     

A depth average SPH model including μ(I) rheology and crushing for rock avalanches

Classical depth-integrated smoothed particle hydrodynamics (SPH) models for avalanches are extended in the present work to include a μ(I)− rheological model enriched with a fragmentation law. With this improvement, the basal friction becomes grain distribution dependent. Rock avalanches, where grain distribution tends to change with time while propagating, are the appropriate type of landslide to apply the new numerical proposal. The μ(I)− rheological models considered in the present work are those of Hatano and Gray, combined with two different fragmentation laws, a hyperbolic and a fractal-based law. As an application, Frank avalanche, which took place in Canada in 1903, is analyzed under the scope of the present approach, focusing in the influence of the rheological and fragmentation laws in the evolution of the avalanche.     

Validation of Landslide Susceptibility Maps; Examples and Applications from a Case Study in Northern Spain

A procedure for validating landslide susceptibility maps wasapplied in a study area in northern Spain and the results obtained compared. Validationwas used to carry out sensitivity analysis for individual variables and combinationsof variables. The validity of different map-making methods was tested, as well as theutility of different types of Favourability Functions. The results obtained show thatvalidation is essential to determine the predictive value of susceptibility maps. Italso helps to better select the most suitable function and significant variables, thus improving the efficiency of the mapping process. Validation based on a temporal strategy makes it possible to derive hazard maps from susceptibility maps.     

Carbon biogeochemistry of the Betsiboka estuary (north-western Madagascar)

Madagascar’s largest estuary (Betsiboka) was sampled along the salinity gradient during the dry season to document the distribution and sources of particulate and dissolved organic carbon (POC, DOC) as well as dissolved inorganic carbon (DIC). The Betsiboka was characterized by a relatively high suspended matter load, and in line with this, low DOC/POC ratios (0.4–2.5). The partial pressure of CO₂ (pCO₂) was generally above atmospheric equilibrium (270–1530 ppm), but relatively low in comparison to other tropical and subtropical estuaries, resulting in low average CO₂ emission to the atmosphere (9.1 ± 14.2 mmol m⁻² d⁻¹). Despite the fact that C4 vegetation is reported to cover >80% of the catchment area, stable isotope data on DOC and POC suggest that C4 derived material comprises only 30% of both pools in the freshwater zone, increasing to 60–70% and 50–60%, respectively, in the oligohaline zone due to additional lateral inputs. Sediments from intertidal mangroves in the estuary showed low organic carbon concentrations (<1%) and δ¹³C values (average −19.8‰) consistent with important inputs of riverine imported C4 material. This contribution was reflected in δ¹³C signatures of bacterial phospholipid derived fatty acids (i + a15:0), suggesting the potential importance of terrestrial organic matter sources for mineralization and secondary production in coastal ecosystems.     

Paleoecology and radiocarbon dating of the Pleistocene megafauna of the Brazilian Intertropical Region

During the Pleistocene a fauna composed of large (biomass > 44 kg) and giant mammals (biomass > 1000 kg) that are usually associated with open environments lived in the Brazilian Intertropical Region. We present here new information concerning the paleoecology and chronology of some species of this megafauna. Carbon isotope analyses were performed for a better understanding of the paleoecology of the species Eremotherium laurillardi (Lund, 1842), Notiomastodon platensis (Ameghino, 1888) and Toxodon platensis (Owen, 1849). The δ¹³C data allow attributing a generalist diet to these species, which varied according to the kind of habitat in which they lived. In more open habitats all species were grazers; in mixed habitats E. laurillardi and T. platensis were mixed feeders, and N. platensis was grazer; and in more closed habitats all species were mixed feeders.     

A DNA tracer used in column tests for hydrogeology applications

Tracing techniques are commonly used to investigate groundwater quality and dynamics, as well as to measure the hydrogeological parameters of aquifers. The last decade has seen a growing interest in environmentally friendly tracers, including single-stranded DNA molecules. In this study, an electrolytic tracer and a synthetic DNA tracer are comparatively evaluated in laboratory scale tests to assess their potential application in field studies aimed at investigating groundwater environments. A real-time quantitative Polymerase Chain Reaction assay was developed and optimized to detect and quantify the DNA tracer, while tracer column tests were performed to investigate the DNA tracer behavior and to compare it to the electrolytic tracer. The results show that the DNA tracer has an almost pure convective flow, while the KCl tracer experiences dispersive behavior. The tracing method proposed can be applied in hydrogeological field studies involving calcareous fractured rock systems, with the DNA tracer particularly suitable in tracing karst systems, which are often characterized by several conduits of flow. To test the DNA tracer in operation, a preliminary test was conducted in the field.