Prediction of open stope hangingwall stability using random forests

Natural Hazards - The prediction of open stope hangingwall (HW) stability is a crucial task for underground mines. In this paper, a relatively novel technique, the random forest (RF) algorithm, is...     

PAN－S光度法测定水和河泥中微量锰

本文研究了ＰＡＮ－Ｓ与锰的显色反应。配合物的最大吸收峰位于５３８ｎｍ波长处，表观摩尔吸光系数为２．９×１０￣４Ｌ·ｍｏｌ￣（－１）·ｃｍ￣（－１），锰量在０─１．６μｇ／ｍｌ范围内符合比尔定律，方法用于水和河泥中微量锰的测定，结果良好。     

壳幔成矿学初探

壳幔成矿学是联结深部地质学与区域成矿学的重要桥梁,将成矿作用与深部过程联系起来,进行壳幔成矿学研究,已成为当今区域成矿学的一种重要发展趋势,壳幔成矿学研究的核心内容是大陆壳幔多层圈相互作用与成矿关系,而壳幔成矿学研究的主要技术支撑是“岩石探针”分析,壳幔成矿学研究应选择若干典型区域,采用演化历史分析与作用过程鉴别结合的思路,对岩包体及其寄生主岩和有关矿床进行深入研究,以查明区域壳幔相互作用事件幕与     

Paleogene of the Huanghekou Sag in the Bohai Bay Basin,NE China: deposition–erosion response to a slope break system of rift lacustrine basins

The sequence architecture and depositional systems of the Paleogene lacustrine rift succession in the Huanghekou Sag, Bohai Bay Basin, NE China were investigated based on seismic profiles, combined with well log and core data. Four second‐order or composite sequences and seven third‐order sequences were identified. The depositional systems identified in the basin include: fan delta, braid delta, meander fluvial delta, lacustrine and sublacustrine fan. Identification of the slope break was conducted combining the interpretation of faults of each sequence and the identification of syndepositional faults, based on the subdivision of sequence stratigraphy and analysis of depositional systems. Multiple geomorphologic units were recognized in the Paleogene of the Huanghekou Sag including faults, flexures, depositional slope break belts, ditch‐valleys and sub‐uplifts in the central sag. Using genetic division principles and taking into consideration tectonic features of the Paleogene of the Huanghekou Sag, the study area was divided into the Northern Steep Slope/Fault Slope Break System, the Southern Gentle Slope Break System and T10 Tectonic Slope Break System/T10 Tectonic Belt. Responses of slope break systems to deposition–erosion are shown as: (1) basin marginal slope break is the boundary of the eroded area and provenance area; (2) ditch‐valley formed by different kinds of slope break belts is a good transport bypass for source materials; (3) shape of the slope break belt of the slope break system controls sediments types; (4) the ditch‐valley and sub‐sag of a slope break system is an unloading area for sediments; and (5) due to their different origins, association characteristics and developing patterns, the Paleogene slope break belt systems in the Huanghekou Sag show different controls on depositional systems. The Northern Fault Slope Break system controls the deposition of a fan delta‐lacustrine‐subaqueous fan, the Southern Gentle Slope Break system controls the deposition of a fluvial–deltaic–shallow lacustrine and sublacustrine fan, and the T10 Tectonic Slope Break System controls the deposition of shallow lacustrine beach bar sandbodies. The existence of a slope break system is a necessary but not a sufficient condition for studying sandbody development. The formation of effective sandbodies along the slope break depends on the reasonable coupling of effective provenance, necessary association patterns of slope break belt, adequate unloading space and creation of definite accommodation space. Copyright © 2013 John Wiley & Sons, Ltd.     

Mineralogy,Fluid Inclusion,and Hydrogen and Oxygen Isotope Studies of the Intrusion‐Related Yangla Cu Deposit in the Sanjiang Region,SW China: Implications for Metallogenesis and Deposit Type

The Yangla deposit is an intrusion‐related Cu deposit in the Jinshajiang tectonic belt (eastern Sanjiang region, SW China). Despite extensive studies that have been conducted on this deposit, the relationship between the granitic magma and Cu mineralization is still unclear, and hence, the genesis is debated. To answer this question, we conducted an integrated study of mineralogy, fluid inclusions (FIs), and hydrogen and oxygen (H‐O) isotopes. Three mineralization stages were identified based on the ore textures, alteration zonation, and crosscutting relationships: (i) pre‐ore prograde skarn (stage I), with the garnet and pyroxene dominated by andradite and diopside, respectively; (ii) syn‐ore retrograde alteration (stage II), which is subdivided into the early syn‐ore stage (stage IIa) marked by retrograde hydrated mineral assemblages and significant Fe‐Cu‐Mo‐Pb‐Zn sulfide mineralization, and the late syn‐ore stage (stage IIb) featured by quartz‐calcite veins; and (iii) late supergene mineralization (stage III), which is characterized by secondary azurite and malachite. These results of mineralogy, FIs, and H‐O isotopes indicate that: (i) Cu mineralization has a close temporal, spatial, and genetic relationship with skarn alteration; (ii) the ore fluids were magmatic dominated with late‐stage meteoric water incursion; and (iii) Type‐S (halite‐bearing) and Type‐V (vapor‐rich) FIs coexisted in garnet and clinopyroxene of stage I, indicating that fluid boiling might have occurred during this stage. From stage I to stage IIa, the FI type transformed from Type‐S + Type‐V + Type‐L (liquid‐rich) to Type‐V + Type‐L with the conduct of mineralization and was accompanied by the disappearance of Type‐S, and homogenization temperature and salinity also tended to decrease dramatically, which may be caused by the deposition of skarn minerals. At stage IIa, boiling of the ore fluids still continued due to the change from lithostatic to hydrostatic pressure, which triggered the precipitation of abundant quartz‐Cu‐Mo‐Fe sulfides. Furthermore, fluid mixing between a high‐temperature magmatic fluid and a low‐temperature meteoric water might cause a considerable drop in temperature and the deposition of Cu‐bearing quartz/calcite veins during stage IIb. Hence, we consider the Yangla deposit to be of a skarn type, genetically related to the Mesozoic magmatism in the Sanjiang region.     

Non-coaxiality of soft clay generated by principal stress rotation under high-speed train loading

Plenty of geomechanics tests and theories have confirmed the existence of non-coaxiality while soil is subjected to principal stress rotation. This paper investigated the influence of one particular principal stress path, which is a ‘heart-shape’ stress path that is normally induced by high-speed train loading, on the non-coaxiality of reconstituted soft clay. Hollow cylinder apparatus was employed to carry out series of undrained dynamic tests. The goals of this study were to (1) reveal the essential factors of complex cyclic loading paths that influence non-coaxiality in clayey soil and (2) quantify the influence of the factors on variation in non-coaxiality under the high-speed training loading. To analyze the non-coaxiality under high-speed train loading, (a) the pure rotation stress path was utilized as comparison for underling the different influence that ‘heart-shape’ stress path has from other conventional cyclic stress paths. (b) Two variables, dynamic stress ratio and tension–compression amplitude ratio, were introduced in analyzing the evolution of the non-coaxial angle. (c) Based on the test results, equations for describing the revolution of non-coaxiality were proposed which can help to describe the variation in non-coaxial angle under complex loadings quantitatively and understand the influence of the major factors of the stress path intensively.

     

Petrography of low rank coals with reference to liquefaction potential

Ten sub-bituminous coals were analyzed petrographically and chemically as part of a program by the Alberta Research Council to investigate the compositional properties of Alberta coals and relationship to liquefaction potential. In addition, four lignites, two from Saskatchewan and one each from Texas and North Dakota, were studied for comparative purposes. Liquefaction experiments were carried out on three of the Alberta coals and on density fractions of the two U.S. lignites. Petrographically the ten sub-bituminous coals could be divided into two populations; one with high huminite and liptinite contents (>90%) and one with substantially lower contents (70–75%). The two U.S. lignites showed huminite plus liptinite contents of less than 70% while the Saskatchewan coals were somewhat higher. Reflectance measurements on the sub-bituminous coals showed a range of 0.33 to 0.51 with a rough correlation to the ASTM rank designations of these coals. Reflectivities determined on the lignites were generally lower. Float-sink fractionation of the two U.S. lignites and two sub-bituminous coals showed enrichment of huminite and liptinite in the lighter fractions and inertinite and mineral matter in the heavier splits. Examination of the relationship between liquefaction yields and petrographic composition showed a rough positive correlation with huminite-liptinite content. Examination of liquefaction residues suggested total conversion of the liptinite, extensive conversion of huminite and possible partial conversion and reactivity of the semifusinite maceral of the inertinite group.