Clay minerals in fluvial shaley sandstone of upper Triassic reservoir (TAGS)—Toual field SE Algeria: identification from wireline logs and core data

The creep property of rock under cyclic loading is very important in civil engineering. In order to establish a novel constitutive equation for rock under cyclic loading, a fractional-order viscoplastic body under cyclic loading was constructed based on fractional-order viscous element. A fractional-order visco-elastoplastic model (FVEPM) for rock was established by connecting constructed fractional-order viscoplastic body with Burgers model. The model was a Burgers model when the maximum value of cyclic loading was less than the critical strength of rock; otherwise, it was a FVEPM which can be used to reflect the transient, steady-state, and tertiary creep phases of rock. The cyclic loading was decomposed into a static load and a cyclic loading with a zero average stress. According to rheological mechanics theory, the rheology constitutive equation of rock under the static load can be derived. According to viscoelastic mechanics theory, the constitutive equation under cyclic loading with a zero average stress was established by introducing the variation parameters of energy storage and energy dissipation compliance caused by rock damage and fracture. Finally, a new dynamic constitutive equation of rock cyclic loading can be obtained by superimposing the constitutive equation under static load and cyclic loading with a zero average stress. Compared with existing test results of rock under cyclic loading, the proposed constitutive model can be used to describe the creep characteristics of rock under cyclic loading and reflect the presented fluctuation of strain curve of rock under cyclic loading.     

The effect of cemented soil strength on the frictional capacity of precast concrete pile–cemented soil interface

Acta Geotechnica - The pre-bored grouted planted (PGP) pile is a composite pile consisting of a precast concrete pile and the cemented soil around the pile. Thus, the PGP pile shaft capacity is...     

Zoning map for drought prediction using integrated machine learning models with a nomadic people optimization algorithm

Natural Hazards - The modelling of drought is of utmost importance for the efficient management of water resources. This article used the adaptive neuro-fuzzy interface system (ANFIS), multilayer...     

Electrochemical Degradation of Remazol Black B Dye Effluent

This study focused on the electrochemical degradation of hydrolyzed Remazol Black B (CI Reactive Black 5), a common diazo reactive dye, in aqueous solution. In the presence of various auxiliary dye chemicals, a typical Remazol Black simulated exhausted dyebath liquor was treated electrochemically in various basic electrochemical reactor configurations such as batch, batch recirculation and single pass systems. The effect of current density, supporting electrolyte concentration, electrolysis duration, specific electrode surface and fluid flow rate on pollutant removal and energy consumption performance of the systems was critically evaluated. Batch studies show the following operating parameters, current density: 2.5 A/dm², electrolysis duration: 6 h, and supporting electrolyte concentration: 3 g/L, were optimal for good overall performance of the system. Color removal was complete by 3 h of treatment for all combinations of parameters studied. The pollutant removal performance of the batch recirculation system was found to have improved considerably by increasing the flow rate. Performance of the batch recirculation system was comparatively better than the other rector configurations studied, with respect to capacity utilization and energy consumption.     

Deep-seated failure propagation in a fractured rock slope over 10,000 years: The La Clapière slope, the south-eastern French Alps

The “La Clapière” area (Tinée valley, Alpes Maritimes, France) is a typical large, complex, unstable rock slope affected by Deep Seated Gravitational Slope Deformations (DGSD) with tension cracks, scarps, and a 60 × 10⁶ m³ rock slide at the slope foot that is currently active. The slope surface displacements since 10 ka were estimated from ¹⁰Be ages of slope gravitational features and from morpho-structural analyses. It appears that tensile cracks with a strike perpendicular to the main orientation of the slope were first triggered by the gravitational reactivation of pre-existing tectonic faults in the slope. A progressive shearing of the cracks then occurred until the failure of a large rock mass at the foot of the slope. By comparing apertures, variations and changes in direction between cracks of different ages, three phases of slope surface displacement were identified: 1) an initial slow slope deformation, spreading from the foot to the top, characterized by an average displacement rate of 4 mm yr^− 1, from 10–5.6 ka BP; 2) an increase in the average displacement rate from 13 to 30 mm yr^− 1 from the foot to the middle of the slope, until 3.6 ka BP; and 3) development of a large failure at the foot of the slope with fast displacement rates exceeding 80 mm yr^− 1 for the last 50 years. The main finding of this study is that such a large fractured slope destabilization had a very slow displacement rate for thousands of years but was followed by a recent acceleration. The results obtained agree with several previous studies, indicating that in-situ monitoring of creep of a fractured rock slope may be useful for predicting the time and place of a rapid failure.     

Seismic performance of three-dimensional frame structures with underground stories

This paper investigates the seismic performance of moment-resisting frame steel buildings with multiple underground stories resting on shallow foundations. A parametric study that involved evaluating the nonlinear seismic response of five, ten and fifteen story moment-resisting frame steel buildings resting on flexible ground surface, and buildings having one, three and five underground stories was performed. The buildings were assumed to be founded on shallow foundations. Two site conditions were considered: soil class C and soil class E, corresponding to firm and soft soil deposits, respectively. Vancouver seismic hazard has been considered for this study. Synthetic earthquake records compatible with Vancouver uniform hazard spectrum (UHS), as specified by the National Building Code of Canada (NBCC) 2005, have been used as input motion. It was found that soil–structure interaction (SSI) can greatly affect the seismic performance of buildings in terms of the seismic storey shear and moment demand, and the deformations of their structural components. Although most building codes postulate that SSI effects generally decrease the force demand on buildings, but increase the deformation demand, it was found that, for some of the cases considered, SSI effects increased both the force and deformation demand on the buildings. The SSI effects generally depend on the stiffness of the foundation and the number of underground stories. SSI effects are significant for soft soil conditions and negligible for stiff soil conditions. It was also found that SSI effects are significant for buildings resting on flexible ground surface with no underground stories, and gradually decrease with the increase of the number of underground stories.     

Multivariate homogeneity testing in a northern case study in the province of Quebec,Canada

In regional frequency analysis, the examination of the regional homogeneity represents an important step of the procedure. Flood events possess multivariate characteristics which can not be handled by classical univariate regional procedures. For instance, classical procedures do not allow to assess regional homogeneity while taking into consideration flood peak, volume and duration. Chebana and Ouarda proposed multivariate discordancy and homogeneity tests. They carried out a simulation study to evaluate the performance of these tests. In the present paper, practical aspects are investigated jointly on flood peak and flood volume of a data set from the Côte‐Nord region in the province of Quebec, Canada. It is shown that, after removing the discordant sites, the remaining ones constitute a homogeneous region for the volumes and heterogeneous region for the peaks. However, if both variables are jointly considered, the obtained region is possibly homogeneous. Furthermore, the results demonstrate the usefulness of the bivariate test to take into account the dependence structure between the variables representing the event, and to take advantage of more information from the hydrograph. Copyright © 2009 John Wiley & Sons, Ltd.     

Full operator algorithm for hybrid simulation

One of the weaknesses of the operator splitting method (OSM) is that its corrector step employs the approximation that incremental forces are linearly related to the tested structure's initial stiffness matrix. This paper presents a new predictor–corrector technique in which the assumptions about the tested structure's response are shifted to the predictor step, which results in an enhancement in overall simulation accuracy, especially for nonlinear structures. Unlike OSM, which splits the displacement and velocity operators into explicit and implicit terms, the new method uses predicted accelerations to compute fully explicit displacement and velocity values in the predictor step. Another advantage of the proposed technique, termed the full operator method (FOM) is that its formulation makes it suitable for both quasi‐static and real‐time hybrid simulation. The effectiveness of FOM is first evaluated by investigating error propagation in an undamped single degree‐of‐freedom model. It is shown that the corrector step in FOM is able to significantly suppress aberrant simulation results caused by incorrect estimation of the structure's stiffness matrix. The performance of FOM is demonstrated by exercising two additional models, which exhibit significant inelastic behavior under the prescribed excitation. The simulation results show that the proposed FOM algorithm is capable of producing accurate solutions and that the corrector step is influential in effectively reducing simulation errors. It is also shown that FOM suppresses actuator displacement control errors because of its reliance on measured quantities in the corrector step. Copyright © 2009 John Wiley & Sons, Ltd.     

Dynamic response of a flexible pavement submitted by impulsive loading

The present paper introduces results from measurements on site using a falling weight deflectometer (FWD). This apparatus is used for non-destructive testing of damaged pavement in order to estimate the elastic modulus of each layer. The basin of deflection induced by a controlled load can be determined with precision and can reflect the behavior of the pavement structure. The interpretation of data generated by FWD leans on inverse analysis processes. Data from FWD combined with the thickness of layers inform on the evolution of the Young's modulus of each layer of the structure along the studied road profile. This information can be also used to estimate its lifespan and possible repairs to be carried out.