Statistical properties of the temperature, relative humidity, and net solar radiation in the Blue Nile-eastern Sudan region

This paper presents the results of the first stage of an ongoing project of evaluating the spatial and temporal variability of soil water as fundamental factors for vegetation regeneration in the arid ecosystems in the Blue Nile-eastern Sudan. The specific aim of the present study is to understand the temporal and spatial variations of the major climate variables in the region and discuss its relevance to regional climate variability and changes. In this case, we systematically analyze the major climate variables (maximum and minimum air temperature, relative humidity, and net solar radiation). To evaluate the different characteristics of the climate variables, Mann–Kendall method, two-phase regression scheme, and wavelet transform technique are used; each method has its own strength and weakness, and the results of the three methods complement each other. The results show that the annual and seasonal maximum temperatures are increasing significantly. The annual minimum temperature and minimum temperature in dry seasons are decreasing. The minimum temperature in rainy season is increasing with a smaller rate as compared with the increase of maximum temperature in the season. The difference between maximum and minimum temperature is increasing in all the seasons. Net solar radiation in the region shows a significant increasing trend in all seasons, which corresponds well with the changes of maximum temperature. Besides, significant decreasing trends can be identified for relative humidity in all the seasons.     

Investigation of regional climate models’ internal variability with a ten-member ensemble of 10-year simulations over a large domain

Previous investigations on regional climate models’ (RCM) internal variability (IV) were limited owing to small ensembles, short simulations and small domains. The present work extends previous studies with a ten-member ensemble of 10-year simulations performed with the Canadian Regional Climate Model over a large domain covering North America. The results show that the IV has no long-term tendency but rather fluctuates in time following the synoptic situation within the domain. The IV of mean-sea-level pressure (MSLP) and screen temperature (ST) show a small annual cycle with larger values in spring, which differs from previous studies. For precipitation (PCP), the IV shows a clear annual cycle with larger values in summer, as previously reported. The 10-year climatology of the IV for MSLP and ST shows a well-defined spatial distribution with larger values in the northeast of the domain, near the outflow boundary. A comparison of the IV of MSLP and ST in summer with the transient-eddy variance reveals that the IV is close to its maximum in a small region near the outflow boundary. Same analysis for PCP in summer shows that the IV reaches its maximum in most parts of the domain, except for a small region on the western side near the inflow boundary. Finally, a comparison of the 10-year climate of each simulation of the ensemble showed that the IV may have a significant impact on the climatology of some variables.     

On rising temperature trends of Karachi in Pakistan

Karachi is the largest city of Pakistan. The temperature change in Karachi is studied in this research by analyzing the time series data of mean maximum temperature (MMxT), mean minimum temperature (MMiT) and mean annual temperature (MAT) from 1947 to 2005 (59 years). Data is analyzed in three parts by running linear regression and by taking anomalies of all time periods: (a) whole period from 1947–2005; (b) phase one 1947–1975 and (c) phase two 1976–2005. During 1947 to 2005 MMxT has increased about 4.6°C, MMiT has no change and MAT has increased 2.25°C. During 1947–1975, MMxT increased 1.9°C, in this period there is − 1.3°C decrease in MMiT and MAT has raised upto 0.3°C. During 1976–2005, the MMxT, MMiT and MAT increased 2.7°C, 1.2°C and 1.95°C, respectively. The analysis shows significantly the role of extreme vulnerability of MMxT in rising the temperature of Karachi than the MMiT.     

Surface Energy Balance Measurements Above an Exurban Residential Neighbourhood of Kansas City,Missouri

Previous measurements of urban energy balances generally have been limited to densely built, central city sites and older suburban locations with mature tree canopies that are higher than the height of the buildings. In contrast, few data are available for the extensive, open vegetated types typical of low-density residential areas that have been newly converted from rural land use. We made direct measurements of surface energy fluxes using the eddy-covariance technique at Greenwood, a recently developed exurban neighbourhood near Kansas City, Missouri, USA, during an intensive field campaign in August 2004. Energy partitioning was dominated by the latent heat flux under both cloudy and near clear-sky conditions. The mean daytime Bowen ratio (β) values were 0.46, 0.48, and 0.47 respectively for the cloudy, near clear-sky and all-sky conditions. Net radiation (R _n ) increased rapidly from dawn (−34 and −58W m⁻²) during the night to reach a maximum (423 and 630W m⁻²) after midday for cloudy and near clear-sky conditions respectively. Mean daytime values were 253 and 370W m⁻², respectively for the cloudy and near clear-sky conditions, while mean daily values were 114 for cloudy and 171W m⁻² for near clear-sky conditions, respectively. Midday surface albedo values were 0.25 and 0.24 for the cloudy and near clear-sky conditions, respectively. The site exhibited an angular dependence on the solar elevation angle, in contrast to previous observations over urban and suburban areas, but similar to vegetated surfaces. The latent heat flux (Q _E ), sensible heat flux (Q _H ), and the residual heat storage ΔQ _s terms accounted for between 46–58%, 21–23%, and 18–31% of R _n , respectively, for all-sky conditions and time averages. The observed albedo, R _n , and Q _E values are higher than the values that have been reported for suburban areas with high summer evapotranspiration rates in North America. These results suggest that the rapidly growing residential areas at the exurban fringe of large metropolitan areas have a surface energy balance that is more similar to the rural areas from which they were developed than it is to the older suburbs and city centres that make up the urban fabric to which they are being joined.     

Electrical Resistivity Imaging technique to delineate coal seam barrier thickness and demarcate water filled voids

Exploration and exploitation of coal seams is one of the major resources for the energy sector in any country but at the same time water filled voids/water logged areas in the old workings of these seams are very critical problems for the coal mining industry. In such situations, disasters like inundation, landslides, collapsing of the old seams may occur. In this regard, it is necessary to find out the water saturated/water filled voids and zones in the mining areas. Since no established technique is available to find such zones, an experimental study using Electrical Resistivity Imaging (ERI) has been carried out in one of the coal mining areas near Dhanbad, to find out the feasibility of finding the barrier thickness and the water logged area in underground coal mines. The area under study forms part of Jharia coalfield in Dhanbad district, Jharkhand state. The coal bearing rocks of Barakar Formation of Lower Permian age (Gondwana period) occur in the area under a thin cover (10 m to15 m) of soil and or alluvium. Coal bearing Barakar Formations consist mainly of sandstone of varying grain size, intercalation of shale and sandstone, grey and carbonaceous-shale and coal seams. Since the water saturation reduces the resistivity of a formation to a large extent, water filled voids and old coal workings are expected to have significant resistivity contrast with the surrounding host rock. Hence, ERI technique was applied in such an environment as this technique uses high-density data acquisition both laterally and vertically by using multiple number of electrodes. Along with ERI, mise-à-la-masse (also called charged body) technique was also employed at one of the promising sites to find out the connectivity of water logged areas and also detection of these old workings from the surface measurements was analyzed. The interpreted 2D resistivity sections have clearly indicated the water bearing zone(s) along the profile which was well confirmed with the existing water level in the nearby borewells. On the other hand, this technique did not identify the size of the coal pillar and gallery (air filled voids), which might be due to the small size of the voids (i.e. about 2 m × 2 m) below a depth of 15m and more but have indicated altogether as a high resistive zone ranging from 600–1000 Ohm-m.     

Geological and geophysical investigation of Kamil crater,Egypt

Abstract– We detail the Kamil crater (Egypt) structure and refine the impact scenario, based on the geological and geophysical data collected during our first expedition in February 2010. Kamil Crater is a model for terrestrial small‐scale hypervelocity impact craters. It is an exceptionally well‐preserved, simple crater with a diameter of 45 m, depth of 10 m, and rayed pattern of bright ejecta. It occurs in a simple geological context: flat, rocky desert surface, and target rocks comprising subhorizontally layered sandstones. The high depth‐to‐diameter ratio of the transient crater, its concave, yet asymmetric, bottom, and the fact that Kamil Crater is not part of a crater field confirm that it formed by the impact of a single iron mass (or a tight cluster of fragments) that fragmented upon hypervelocity impact with the ground. The circular crater shape and asymmetries in ejecta and shrapnel distributions coherently indicate a direction of incidence from the NW and an impact angle of approximately 30 to 45°. Newly identified asymmetries, including the off‐center bottom of the transient crater floor downrange, maximum overturning of target rocks along the impact direction, and lower crater rim elevation downrange, may be diagnostic of oblique impacts in well‐preserved craters. Geomagnetic data reveal no buried individual impactor masses >100 kg and suggest that the total mass of the buried shrapnel >100 g is approximately 1050–1700 kg. Based on this mass value plus that of shrapnel >10 g identified earlier on the surface during systematic search, the new estimate of the minimum projectile mass is approximately 5 t.     

A systematic review on approaches and methods used for flood vulnerability assessment: framework for future research

Natural Hazards - Floods have always been associated with widespread devastation and destruction since the emergence of human civilization. The intensity of this disaster has been increasing due to...     

Late Bronze Age paleogeography along the ancient Ways of Horus in Northwest Sinai,Egypt

The northwest Sinai contained the eastern frontier of New Kingdom Egypt during the Late Bronze Age. The ancient Pelusaic branch of the Nile Delta influenced the environmental setting of this region at that time. Fortresses were built along the coastal byway through the study area known as the Ways of Horus to protect Egyptian‐held territory from immigrants and intruders from Canaan and the Mediterranean Sea. Building on previous geomorphic studies in the region, this paper presents the results of field investigations of Holocene sedimentary deposits, aided by satellite photography, used to create a paleogeographic map that places archaeological sites in their proper environmental context. CORONA satellite photographs from the late 1960s reveal surface features that have been obscured by more recent agricultural development in the region. Canals dug for an agricultural project provided easy access to the shallow subsurface for mapping the extent of Holocene sediments representing barrier coast, lagoon, estuarine, fluvial, and marsh depositional environments. © 2008 Wiley Periodicals, Inc.     

Role of Fracturing in the Organization of the Karst Features of Azrou Plateau (Middle Atlas,Morroco) Studied by Remote Sensing Imagery

Karst formation geometry can be controlled by fractures and faults, and by other lithologies. Here we show the organization of kastic collapse features related to structures and to extensive basaltic lava flows in the Middle Atlas of Morocco. A lineament map of major faults and fractures has been created for the Middle Atlas using Landsat 7 ETM⁺ satellite images. This shows a dominant NE–SW regional direction and less prominent NNW–SSE and ENE–WSE directions. All these directions coincide with the alignments of karstic depressions that have formed in the Liassic limestones. The basaltic flows covering these formations on the Middle Atlas limestone plateau, have allowed the generation of cryptokarst, geometrically organized a long these major lineament directions. Karst landforms probabaly existed before the eruption of the lavas, but there were partly invaded by intrusions and volcanism. The extensive basaltic flows allowed for increased infiltration, and subsurface water flow, increasing the rate of kast formation after eruptions. Some basins show evidence of increased subsidence after lava emplacement (Aguelmam Sidi Ali Lake) and some maar-like craters also have subsided after eruption, by karts formation. We lay out the structural and lithological controls on Karstic formation in an intraplate volcanic field based on limestones and evaporites.     

Evaluating the Ability of CRCM5 to Simulate Mixed Precipitation

Precipitation episodes in the form of freezing rain and ice pellets represent natural hazards affecting eastern Canada during the cold season. These types of precipitation mainly occur in the St. Lawrence River valley and the Atlantic provinces of Canada. This study aims to evaluate the ability of the fifth-generation Canadian Regional Climate Model (CRCM5), using a 0.11° horizontal grid mesh, to hindcast mixed precipitation when driven by reanalyses produced by the European Centre for Medium-range Weather Forecasts (ERA-Interim) for a 35-year period. In general, the CRCM5 simulation slightly overestimates the occurrence of freezing rain, but the geographical distribution is well reproduced. The duration of freezing rain events and accompanying surface winds in the Montréal region are reproduced by CRCM5. A case study is performed for an especially catastrophic freezing-rain event in January 1998; the model succeeds in simulating the intensity and duration of the episode, as well as the propitious meteorological environment. Overall, the model is also able to reproduce the climatology and a specific event of freezing rain and ice pellets.